1～50 keV低能质子束注入装置

陈立华; 崔保群; 马鹰俊; 马瑞刚; 唐兵; 黄青华

doi:10.11804/NuclPhysRev.32.S1.25

原子核物理评论

1～50 keV低能质子束注入装置

, , , , ,

陈立华, 崔保群, 马鹰俊, 马瑞刚, 唐兵, 黄青华. 2015: 1～50 keV低能质子束注入装置, 原子核物理评论, null(z1): 25-28. doi: 10.11804/NuclPhysRev.32.S1.25

引用本文:

陈立华, 崔保群, 马鹰俊, 马瑞刚, 唐兵, 黄青华. 2015: 1～50 keV低能质子束注入装置, 原子核物理评论, null(z1): 25-28. doi: 10.11804/NuclPhysRev.32.S1.25

CHEN Lihua, CUI Baoqun, MA Yingjun, MA Ruigang, TANG Bing, HUANG Qinghua. 2015: A 1～50 keV Low-Energy Proton Implanter, Nuclear Physics Review, null(z1): 25-28. doi: 10.11804/NuclPhysRev.32.S1.25

Citation:

CHEN Lihua, CUI Baoqun, MA Yingjun, MA Ruigang, TANG Bing, HUANG Qinghua. 2015: A 1～50 keV Low-Energy Proton Implanter, Nuclear Physics Review, null(z1): 25-28. doi: 10.11804/NuclPhysRev.32.S1.25

1～50 keV低能质子束注入装置

中国原子能科学研究院,北京,102413

A 1～50 keV Low-Energy Proton Implanter

摘要: 为了开展空间环境中低能粒子对航天电子器件作用规律的研究，根据研究项目需要，研制一台1～50 keV的低能质子束装置。该装置具有无需机械调节即可对质子能量、注入面积、注量率等参数进行大范围调节的特点。装置设计紧凑、所占空间小、成本低。介绍了质子束装置的基本构成以及聚焦透镜、速度选择器、扫描器等主要元件的结构特点及优化措施。调试结果表明，装置的性能达到了预期的技术指标，在有效注入面积内可达90%以上的均匀度，并能够长期稳定运行，满足了研究的需要。
- 空间环境 /
- 质子束 /
- 均匀度 /
- 低能粒子
Abstract: The particles in the space environment are an important factor for the abnormity of spacecraft. So, it’s necessary to study on the effect of low-energy particles to spacecraft. In view of this, a 1～50 keV low-energy proton implanter has been developed in China Institute of Atomic Energy. The implanter has the characteristics of its injection area, flux density and energy that could be adjusted in a wide range according to the requirement, almost no need mechanical change. The uniformity of the injected proton in available area is better than 90%. And the implanter has the advantages of compact structure and low cost. In this paper, the principle of implanter and the design of its main transport elements, such as lens, Wien filter and scanner, have been described. The experimental results show that the performance of the implanter meets to the demand of study. And the implanter runs steadily and reliably.

计量

文章访问数: 151
HTML全文浏览数: 29
PDF下载数: 0
施引文献: 0

1～50 keV低能质子束注入装置

中国原子能科学研究院,北京,102413

关键词:

摘要: 为了开展空间环境中低能粒子对航天电子器件作用规律的研究，根据研究项目需要，研制一台1～50 keV的低能质子束装置。该装置具有无需机械调节即可对质子能量、注入面积、注量率等参数进行大范围调节的特点。装置设计紧凑、所占空间小、成本低。介绍了质子束装置的基本构成以及聚焦透镜、速度选择器、扫描器等主要元件的结构特点及优化措施。调试结果表明，装置的性能达到了预期的技术指标，在有效注入面积内可达90%以上的均匀度，并能够长期稳定运行，满足了研究的需要。

English Abstract

A 1～50 keV Low-Energy Proton Implanter

中国原子能科学研究院,北京,102413

Keywords:

Abstract: The particles in the space environment are an important factor for the abnormity of spacecraft. So, it’s necessary to study on the effect of low-energy particles to spacecraft. In view of this, a 1～50 keV low-energy proton implanter has been developed in China Institute of Atomic Energy. The implanter has the characteristics of its injection area, flux density and energy that could be adjusted in a wide range according to the requirement, almost no need mechanical change. The uniformity of the injected proton in available area is better than 90%. And the implanter has the advantages of compact structure and low cost. In this paper, the principle of implanter and the design of its main transport elements, such as lens, Wien filter and scanner, have been described. The experimental results show that the performance of the implanter meets to the demand of study. And the implanter runs steadily and reliably.

全文HTML

参考文献 (0)

下载: 全尺寸图片幻灯片

返回文章

用微信扫码二维码

分享至好友和朋友圈

1～50 keV低能质子束注入装置

A 1～50 keV Low-Energy Proton Implanter

计量

出版历程

1～50 keV低能质子束注入装置

English Abstract

A 1～50 keV Low-Energy Proton Implanter

全文HTML

目录