准球型负载装配技术

余斌; 周秀文; 朱晔; 杨波; 刘旭东; 杨毅; 方瑜; 王朝阳; 牛高

doi:10.11884/HPLPB201426.102002

强激光与粒子束

准球型负载装配技术

, , , , , , , ,

余斌, 周秀文, 朱晔, 杨波, 刘旭东, 杨毅, 方瑜, 王朝阳, 牛高. 2014: 准球型负载装配技术, 强激光与粒子束, null(10): 102002. doi: 10.11884/HPLPB201426.102002

引用本文:

余斌, 周秀文, 朱晔, 杨波, 刘旭东, 杨毅, 方瑜, 王朝阳, 牛高. 2014: 准球型负载装配技术, 强激光与粒子束, null(10): 102002. doi: 10.11884/HPLPB201426.102002

Yu Bin, Zhou Xiuwen, Zhu Ye, Yang Bo, Liu Xudong, Yang Yi, Fang Yu, Wang Chaoyang, Niu Gao. 2014: Assembly technology of quasi-spherical load, High Power Lase and Particle Beams, null(10): 102002. doi: 10.11884/HPLPB201426.102002

Citation:

Yu Bin, Zhou Xiuwen, Zhu Ye, Yang Bo, Liu Xudong, Yang Yi, Fang Yu, Wang Chaoyang, Niu Gao. 2014: Assembly technology of quasi-spherical load, High Power Lase and Particle Beams, null(10): 102002. doi: 10.11884/HPLPB201426.102002

准球型负载装配技术

中国工程物理研究院激光聚变研究中心,四川绵阳,621900

Assembly technology of quasi-spherical load

摘要: 根据准球型负载的结构和材料特点及其装配过程中对精度的要求，开展了丝阵和泡沫微球装配技术的研究。并根据准球型负载的丝阵装配技术，进行了丝阵直径约8 mm、钨丝直径约10μm 的丝阵负载装配；利用泡沫微球装配系统进行了直径约3 mm微球与直径约200μm玻璃纤维的精确装配。准球型负载已成功应用于准球型负载物理试验中，并取得了较为理想的试验结果，有望在惯性约束聚变(ICF)物理试验及准球型负载物理试验中发挥更大的作用。
- 装配精度 /
- 准球型负载 /
- 惯性约束聚变 /
- Z箍缩 /
- 钨丝 /
- 低密度泡沫微球
Abstract: Based on the structural and material characteristics and requirements of the accuracy of quasi-spherical load in the process of assembly,the study on the assembly process of microspheres and wire array was carried out.And according to the as-sembly process of wire array,we finished the assembly of wire array with 8 mm diameter,and tungsten wire with 10μm diame-ter;the assembly of a micro ball with 3 mm diameter and glass fiber with 200μm diameter was performed on a foam microsphere micro-assembly system.Quasi-spherical load was successfully applied in physical tests of quasi-spherical load,and satisfactory re-sults were achieved.It is expected to play a greater role in inertial confinement fusion (ICF)and physical tests of the quasi-spheri-cal load in the future.

计量

文章访问数: 323
HTML全文浏览数: 75
PDF下载数: 11
施引文献: 0

准球型负载装配技术

中国工程物理研究院激光聚变研究中心,四川绵阳,621900

关键词:

摘要: 根据准球型负载的结构和材料特点及其装配过程中对精度的要求，开展了丝阵和泡沫微球装配技术的研究。并根据准球型负载的丝阵装配技术，进行了丝阵直径约8 mm、钨丝直径约10μm 的丝阵负载装配；利用泡沫微球装配系统进行了直径约3 mm微球与直径约200μm玻璃纤维的精确装配。准球型负载已成功应用于准球型负载物理试验中，并取得了较为理想的试验结果，有望在惯性约束聚变(ICF)物理试验及准球型负载物理试验中发挥更大的作用。

English Abstract

Assembly technology of quasi-spherical load

中国工程物理研究院激光聚变研究中心,四川绵阳,621900

Keywords:

Abstract: Based on the structural and material characteristics and requirements of the accuracy of quasi-spherical load in the process of assembly,the study on the assembly process of microspheres and wire array was carried out.And according to the as-sembly process of wire array,we finished the assembly of wire array with 8 mm diameter,and tungsten wire with 10μm diame-ter;the assembly of a micro ball with 3 mm diameter and glass fiber with 200μm diameter was performed on a foam microsphere micro-assembly system.Quasi-spherical load was successfully applied in physical tests of quasi-spherical load,and satisfactory re-sults were achieved.It is expected to play a greater role in inertial confinement fusion (ICF)and physical tests of the quasi-spheri-cal load in the future.

全文HTML

参考文献 (0)

下载: 全尺寸图片幻灯片

返回文章

用微信扫码二维码

分享至好友和朋友圈

准球型负载装配技术

Assembly technology of quasi-spherical load

计量

出版历程

准球型负载装配技术

English Abstract

Assembly technology of quasi-spherical load

全文HTML

目录