无注入型量子点发光器件中声电耦合特性模拟仿真研究

,  ,  ,  ,  ,  , 

上一篇

下一篇

曾涛, 黄伟, 吴妙坤, 吴绍宏, 李龙, 吕佳洋, 吴朝兴. 无注入型量子点发光器件中声电耦合特性模拟仿真研究[J]. 真空科学与技术学报, 2026, 46(9): 836-846. doi: 10.13922/j.cnki.cjvst.202606011
引用本文: 曾涛, 黄伟, 吴妙坤, 吴绍宏, 李龙, 吕佳洋, 吴朝兴. 无注入型量子点发光器件中声电耦合特性模拟仿真研究[J]. 真空科学与技术学报, 2026, 46(9): 836-846. doi: 10.13922/j.cnki.cjvst.202606011
tao ZENG, wei HUANG, miaokun WU, shaohong WU, long LI, Jiayang LV, chaoxing WU. Modeling and Simulation of Electroacoustic Coupling in Non-Carrier-Injection Quantum Dot Light-Emitting Devices[J]. zkkxyjsxb, 2026, 46(9): 836-846. doi: 10.13922/j.cnki.cjvst.202606011
Citation: tao ZENG, wei HUANG, miaokun WU, shaohong WU, long LI, Jiayang LV, chaoxing WU. Modeling and Simulation of Electroacoustic Coupling in Non-Carrier-Injection Quantum Dot Light-Emitting Devices[J]. zkkxyjsxb, 2026, 46(9): 836-846. doi: 10.13922/j.cnki.cjvst.202606011

无注入型量子点发光器件中声电耦合特性模拟仿真研究

    通讯作者: E-mail: chaoxing_wu@fzu.edu.cn
  • 中图分类号: TN383

Modeling and Simulation of Electroacoustic Coupling in Non-Carrier-Injection Quantum Dot Light-Emitting Devices

    Corresponding author: chaoxing WU, chaoxing_wu@fzu.edu.cn
  • MSC: TN383

  • 摘要: 无载流子注入(Non-Carrier-Injection, NCI)模式是一种无需外部电荷注入的新型电致发光策略,揭示NCI物理机制对于提升其辐射复合率具有重要价值。NCI器件在交流电场驱动下必然伴随晶格振动与声电耦合,但该效应对发光过程的影响尚未被系统研究。本文以核壳结构量子点为对象,通过有限元仿真,引入声子影响经验公式,建立了声电耦合框架,定量分析了温度与压电效应对能带结构、载流子分布及发光效率的影响。结果表明,温度升高通过增强电子-声子散射使电子浓度显著下降,是效率衰减的主因。压电效应诱导的内电场对能带施加周期性调制,使辐射复合率低于无压电条件,推测其机制为压电场在偏压阶段将部分电子解离核区,使其短暂滞留在核壳界面而未能有效复合。本工作为理解NCI量子点发光器件中的声电耦合效应及效率优化提供了理论参考。
  • 加载中
  • 图 1  NCI量子点发光器件结构模型与声电耦合机制示意图。(a)NCI量子点发光器件结构仿真模型图,(b)声电耦合机制概念图,(c)压电效应诱导内电场的动态演化概念图

    Figure 1.  Structure model and electroacoustic coupling mechanism of NCI quantum dot light-emitting device. (a) Simulation model of the NCI quantum dot device structure, (b) electroacoustic coupling mechanism, (c) dynamic evolution of the piezoelectricity-induced internal electric field

    图 2  温度对载流子浓度与发光效率的影响。(a)不同温度下电子浓度空间分布,(b)不同温度下空穴浓度空间分布,(c)Cnp数值与光出射率随温度的变化曲线

    Figure 2.  Effect of temperature on carrier concentration and emission rate. (a) Spatial distribution of electron concentration at different temperatures, (b) spatial distribution of hole concentration at different temperatures, (c) temperature-dependent Cnp and light emission rate

    图 3  载流子掺杂浓度对辐射复合率的影响

    Figure 3.  The effect of carrier doping concentration on the radiation recombination rate

    图 4  压电效应诱导的轴向应变与能带调制。(a)–(c)t=3/4T(7.5 μs),T(10 μs),5/4T(12.5 μs)时刻轴向应变分布;(d)–(f)t=3/4T,T,5/4T时刻有无压电效应条件下导带能级对比;(g)–(i)t=3/4T,T,5/4T时刻有无压电效应条件下价带能级对比

    Figure 4.  Piezoelectricity-induced axial strain and energy band modulation. (a)–(c) Axial strain distribution at t = 3/4T(7.5 μs), T(10 μs), and 5/4T(12.5 μs), (d)–(f) conduction band comparison with and without the piezoelectric effect at t = 3/4T, T, and 5/4T, (g)–(i) valence band comparison with and without the piezoelectric effect at t = 3/4T, T, and 5/4T

    图 5  有无压电效应条件下电子浓度与空穴浓度空间分布对比。(a)–(c)t=3/4T,T,5/4T时刻电子浓度分布;(d)–(f)t=3/4T,T,5/4T时刻空穴浓度分布

    Figure 5.  Comparison of electron and hole spatial distributions with and without the piezoelectric effect. (a)–(c) Electron concentration distribution at t = 3/4T, T, and 5/4T, (d)–(f) Hole concentration distribution at t = 3/4T, T, and 5/4T

    图 6  压电效应对载流子重叠度与光出射率的影响。(a)外加正弦交流电压示意图,(b)–(e)t=7.5,9.9,10,12.5 μs时刻有无压电效应条件下载流子重叠度空间分布对比,(f)三个完整周期内有无压电效应条件下光出射率时间分辨波形

    Figure 6.  Effect of the piezoelectric effect on carrier overlap and light emission efficiency. (a) Schematic of the applied sinusoidal AC voltage, (b)–(e) spatial distribution of carrier overlap at t = 7.5, 9.9, 10, and 12.5 μs, with and without the piezoelectric effect, (f) time-resolved light emission efficiency over three full cycles, comparing conditions with and without the piezoelectric effect

    图 7  压电效应导致发光效率下降的微观机理示意图。(a)外加正弦交流电压示意图,(b)无压电效应时载流子从t=3/4T至t=5/4T的空间分布演化,(c)有压电效应时载流子从t=3/4T至t=5/4T的空间分布演化

    Figure 7.  Schematic of the microscopic mechanism for light emission efficiency reduction caused by the piezoelectric effect. (a) Applied sinusoidal AC voltage, (b) evolution of carrier spatial distribution from t = 3/4T to 5/4T without the piezoelectric effect, (c) evolution of carrier spatial distribution from t = 3/4T to 5/4T with the piezoelectric effect

    表 1  NCI-QD发光器件模型结构参数

    Table 1.  Material parameters for the NCI-QD luminescent device model

    Material Radius
    (Thickness)/
    nm
    Bandgap
    /eV
    Electron
    Affinity
    /eV
    Electron Mobility/
    [cm2/(V·s)]
    Hole Mobility/
    [cm2/(V·s)]
    Doping Concentration/
    cm−3
    n-CdSe 4 1.7 3.8 650 65 1x1017
    p-ZnS 3 3.7 2.6 230 40 1x1017
    注:表中Radius(Thickness)分别表示CdSe半径和ZnS壳层厚度,材料参数为300 K下的参考值,表中材料参数来自文献[34-35]
    下载: 导出CSV

    表 2  声子−温度−应变耦合经验公式参数

    Table 2.  Phonon–temperature–strain coupling empirical formula parameters

    Parameter value unit Parameter value unit
    C0 1×10−16 m3/s Ea 0.15 eV
    S 1.2 1 α 1 1
    p 6 1 β 1 1
    下载: 导出CSV
  • [1] Li J, Su H, Huang W, et al. Interdigital electrode-based quantum dot light-emitting device without carrier injection/transport layers[J]. Science China Materials, 2025, 68(6): 1838−1846 doi: 10.1007/s40843-025-3313-7
    [2] Huang W, Le J, Chen R, et al. Research progress and applications of Non‐Carrier‐Injection electroluminescence[J]. Advanced Electronic Materials, 2026, 12(10): e00889 doi: 10.1002/aelm.202500889
    [3] Huang W, Ji R, Wang K, et al. Fluorescence modulation behavior of quantum dots under alternating electric fields and applications in logic and neuromorphic computing[J]. ACS Applied Materials & Interfaces, 2025, 17(48): 65728−65737 doi: 10.1021/acsami.5c15178
    [4] Li J, Guo Y, Wang K, et al. Shadow-assisted sidewall emission for achieving submicron linewidth light source by using normal UV photolithography[J]. Nano-Micro Letters, 2025, 17(1): 228 doi: 10.1007/s40820-025-01737-w
    [5] Li M, Bao H, Gao P, et al. The stability challenges in developing QLED based display technology[J]. The Journal of Physical Chemistry Letters, 2025, 16(39): 10058−10070 doi: 10.1021/acs.jpclett.5c02156
    [6] Liu X-Y, Cui Y, Deng J-P, et al. Charge carriers trapping by the full-configuration defects in metal halide perovskites quantum dots[J]. The Journal of Physical Chemistry Letters, 2022, 13(38): 8858−8863 doi: 10.1021/acs.jpclett.2c02311
    [7] Song H, Du L, Lin S, et al. Interfacial engineering of quantum dots with PMMA for performance-enhanced light-emitting metal-insulator-semiconductor junction[J]. Optics Express, 2025, 33(16): 34913 doi: 10.1364/OE.570147
    [8] Kim D, Kwon O, Kim M, et al. Charge carrier analysis via impedance spectroscopy and the achievement of high performance in CdSe/ZnS: di-[4-(N, N-di-p-tolyl-amino)-phenyl]cyclohexane hybrid quantum dot light-emitting diodes[J]. Organic Electronics, 2022, 108: 106593 doi: 10.1016/j.orgel.2022.106593
    [9] Kim DH, Wu C, Park DH, et al. Flexible memristive devices based on InP/ZnSe/ZnS core–multishell quantum dot nanocomposites[J]. ACS Applied Materials & Interfaces, 2018, 10(17): 14843−14849 doi: 10.1021/acsami.7b18817
    [10] Zhou W, Coleman JJ. Semiconductor quantum dots[J]. Current Opinion in Solid State and Materials Science, 2016, 20(6): 352−360 doi: 10.1016/j.cossms.2016.06.006
    [11] Gatissa TA, Debela TS, Ali BM. Effect of cubic and spherical quantum dot size and size dispersion on the performance of quantum dot solar cells[J]. AIP Advances, 2024, 14(1): 015236 doi: 10.1063/5.0184745
    [12] Jena S, Hsieh M-C, Huang MH. Formation of ZnS cubes and quantum dots and structural feature for improved quantum dot emission[J]. Langmuir, 2025, 41(23): 14970−14976 doi: 10.1021/acs.langmuir.5c01176
    [13] Kim D, Aydin A, Daza A, et al. Coherent charge carrier dynamics in the presence of thermal lattice vibrations[J]. Physical Review B, 2022, 106(5): 054311 doi: 10.1103/physrevb.106.054311
    [14] Liu R, Fang F, Liu P, et al. Liquid-encapsulated quantum dot for enhanced UV and thermal stability of quantum dot color conversion films[J]. Nano Research, 2024, 17(11): 10127−10133 doi: 10.1007/s12274-024-6971-0
    [15] Mi C, Gee GC, Lander CW, et al. Towards non-blinking and photostable perovskite quantum dots[J]. Nature Communications, 2025, 16(1): 204 doi: 10.1038/s41467-024-55619-7
    [16] Shen Y, Li W, Wang K, et al. In-well ionization from monolayer quantum dots for Non-Carrier-Injection electroluminescence[J]. The Journal of Physical Chemistry Letters, 2022, 13(45): 10649−10655 doi: 10.1021/acs.jpclett.2c02879
    [17] Wan Q, Li Z, Zhang C, et al. Surface oxidation of quantum dots to improve the device performance of quantum dot light-emitting diodes[J]. The Journal of Physical Chemistry C, 2020, 124(52): 28424−28430 doi: 10.1021/acs.jpcc.0c09814
    [18] Je K-C. Optical properties induced by LO-phonon interactions in a single quantum dot[J]. Journal of the Korean Physical Society, 2008, 53(2): 796−801 doi: 10.3938/jkps.53.796
    [19] Nestoklon MO, Goupalov SV. Exciton interaction with acoustic phonons in PbS nanocrystals[J]. Physical Review B, 2022, 106(4): 045306 doi: 10.1103/physrevb.106.045306
    [20] Denning EV, Iles-Smith J, Gregersen N, et al. Phonon effects in quantum dot single-photon sources[J]. Optical Materials Express, 2020, 10(1): 222 doi: 10.1364/OME.380601
    [21] Cherepanov DA, Gostev FE, Shelaev IV, et al. Monitoring the electric field in CdSe quantum dots under ultrafast interfacial electron transfer via coherent phonon dynamics[J]. Nanoscale, 2018, 10(47): 22409−22419 doi: 10.1039/C8NR07644H
    [22] Gong K, Kelley DF, Kelley AM. Resonance raman spectroscopy and electron–phonon coupling in zinc selenide quantum dots[J]. The Journal of Physical Chemistry C, 2016, 120(51): 29533−29539 doi: 10.1021/acs.jpcc.6b12202
    [23] Wang D, Liu R, Han C, et al. Investigation of photoelectrochemical performance under the piezoelectric effect based on different zinc oxide morphologies[J]. Inorganics, 2022, 11(1): 11 doi: 10.3390/inorganics11010011
    [24] Xie Y, Du N, Yu S, et al. Unraveling the structure-dependent radiative and nonradiative decays in (CdSe)13 clusters through first-principles calculations[J]. The Journal of Physical Chemistry C, 2019, 123(50): 30714−30722 doi: 10.1021/acs.jpcc.9b09152
    [25] Matsushita T, Fujimoto S, Schnyder AP. Topological piezoelectric effect and parity anomaly in nodal line semimetals[J]. Physical Review Research, 2020, 2(4): 043311 doi: 10.1103/PhysRevResearch.2.043311
    [26] Mahler F, Reimann K, Woerner M, et al. Impact of piezoelectric fields on coherent zone-folded phonons in GaAs/AlAs superlattices[J]. Physical Review B, 2019, 100(12): 121302 doi: 10.1103/PhysRevB.100.121302
    [27] Zhang D, Cao X, Liu C, et al. Abnormal temperature dependence of Huang–Rhys factor and exciton recombination kinetics in CsPbBr3 perovskite quantum dots[J]. The Journal of Physical Chemistry Letters, 2024, 15(44): 11015−11021 doi: 10.1021/acs.jpclett.4c02300
    [28] Zhao Z, Liu H, Yao Y, et al. High brightness electroluminescence of Non‐Carrier‐Injection QLEDs with precise layer processing by spontaneous spreading method[J]. Advanced Materials Interfaces, 2024, 11(7): 2300801 doi: 10.1002/admi.202300801
    [29] Zhao T, Goodwin ED, Guo J, et al. Advanced architecture for colloidal PbS quantum dot solar cells exploiting a CdSe quantum dot buffer layer[J]. ACS Nano, 2016, 10(10): 9267−9273 doi: 10.1021/acsnano.6b03175
    [30] Zhang T, Wang L, Jiang R, et al. Well-type thick-shell quantum dots combined with double hole transport layers device structure assisted realization of high-performance quantum dot light-emitting diodes[J]. Optics Express, 2024, 32(12): 20618 doi: 10.1364/OE.523932
    [31] Zhao T, Liu B, Wang Y, et al. Optimizing the thermal Conductivity of 2D materials/copper composites through strain‐controlled electron‐phonon coupling effect[J]. Advanced Electronic Materials, 2025, 11(16): e00133 doi: 10.1002/aelm.202500133
    [32] Zhang Y. Applications of Huang–Rhys theory in semiconductor optical spectroscopy[J]. Journal of Semiconductors, 2019, 40(9): 091102 doi: 10.1088/1674-4926/40/9/091102
    [33] Kang B-H, Lee J-S, Lee S-W, et al. Efficient exciton generation in atomic passivated CdSe/ZnS quantum dots light-emitting devices[J]. Scientific Reports, 2016, 6(1): 34659 doi: 10.1038/srep34659
    [34]