高级搜索

SSC注入系统能量接收范围的研究

,  ,  , 

downloadPDF

上一篇

下一篇

丁原涛, 王义芳, 刘巍, 朱昆. 2001: SSC注入系统能量接收范围的研究, 原子核物理评论, 18(1): 43-46. doi: 10.3969/j.issn.1007-4627.2001.01.008
引用本文: 丁原涛, 王义芳, 刘巍, 朱昆. 2001: SSC注入系统能量接收范围的研究, 原子核物理评论, 18(1): 43-46. doi: 10.3969/j.issn.1007-4627.2001.01.008
shu
2001: Research on Energy Acceptance Range of SSC Injection System, Nuclear Physics Review, 18(1): 43-46. doi: 10.3969/j.issn.1007-4627.2001.01.008
Citation: 2001: Research on Energy Acceptance Range of SSC Injection System, Nuclear Physics Review, 18(1): 43-46. doi: 10.3969/j.issn.1007-4627.2001.01.008
shu

SSC注入系统能量接收范围的研究

  • 中国科学院近代物理研究所，甘肃 兰州 730000

Research on Energy Acceptance Range of SSC Injection System

  • 摘要: 分析了影响SSC注入能量的因素和SSC注入系统适应能量变化的能力，计算了在理论等时场下SSC注入系统对3种典型离子O8+,Xe22+和Ar15+的能量可接收范围，找出了加速较轻的重离子时束流损失较大的部分原因.
    Abstract: The SSC injection system and the factors which influence theinjecting beam energy were described and the capability of the SSC injection system for accepting the mismatching injecting beam energy was calculated. For most cases, small difference exists between the values of actual injecting beam energy and the theoretical requirements. The capability of accepting three typical particals: O8+, Xe22+ and Ar15+ were calculated for the SSC injection stystem with small variation of the injection beam energy. The results show that for light particles with high energy, because of its small turn separation, the beam easily hitts the injection components, which leads to beam intensity loss. The high Dee voltage is required to increase the turn separation. For heavier particles, the SSC injection system can accept them in a large energy scale.
  • 加载中
  • 加载中
计量
  • 文章访问数:  381
  • HTML全文浏览数:  72
  • PDF下载数:  1
  • 施引文献:  0
出版历程
  • 刊出日期:  2001-03-20

SSC注入系统能量接收范围的研究

  • 中国科学院近代物理研究所，甘肃 兰州 730000

摘要: 分析了影响SSC注入能量的因素和SSC注入系统适应能量变化的能力，计算了在理论等时场下SSC注入系统对3种典型离子O8+,Xe22+和Ar15+的能量可接收范围，找出了加速较轻的重离子时束流损失较大的部分原因.

English Abstract

    全文HTML

参考文献 (0)

目录

/

返回文章
返回