基于圆柱定程干涉法测量气体黏度的探索*

安保林; 林鸿; 刘强; 段远源

doi:10.7498/aps.62.175101

基于圆柱定程干涉法测量气体黏度的探索*

清华大学热科学与动力工程教育部重点实验室，二氧化碳资源化利用与减排技术北京市重点实验室，北京 100084

中国计量科学研究院热工计量科学研究所,北京,100013

Viscosity measurements using a cylindrical resonator

摘要: 黏度是流体的重要输运性质，实验测量是获取黏度数据的基本手段。圆柱定程干涉法是目前测量气相声速最精确的方法之一，其测量参数为工质的声学共振频率和共振峰半宽。共鸣腔中气相工质的黏性会导致共振频率的偏移和共振峰半宽的增加，是声速测量中的重要非理想影响因素。但通过对共振频率和共振峰半宽的精确测定，并结合热边界层、进气导管、声学传感器及壳体振动等其他非理想因素的修正，可以精确反推获得黏度。本文从理论上探讨了应用圆柱定程干涉法测量共振频率或者共振峰半宽来得到黏度的新方法，以氩(Ar)为例进行了实验验证，测量结果与文献值具有较好一致性，证实了方法的可行性。

关键词:

Abstract: Viscosity is an important fluid transport property, and the viscosity data mostly are obtained from experimental measurements. The fixed path interference method with a cylindrical resonator is one of the most precise ways to gain the gaseous sound speed by measuring the resonance frequency and the half-width of the resonance peak. The gas viscosity affects the sound speed, leading to the offset of the resonance frequency and the increase of half-width of the resonance peak. Viscosity can be accurately acquired through the measurement of the resonance frequency and the half-width of the resonance peak, together with modifications due to the effect of the thermal boundary layer, the fill duct on the resonator shell, the transducer and the resonator shell vibration. In this paper, the way to acquire viscosity by the cylindrical resonator was developed and was verified by measuring argon (Ar) viscosity, and we find the result agreeing well with the data given in the literature.

基于圆柱定程干涉法测量气体黏度的探索*

清华大学热科学与动力工程教育部重点实验室，二氧化碳资源化利用与减排技术北京市重点实验室，北京 100084

中国计量科学研究院热工计量科学研究所,北京,100013

关键词:

Viscosity measurements using a cylindrical resonator

清华大学热科学与动力工程教育部重点实验室，二氧化碳资源化利用与减排技术北京市重点实验室，北京 100084

中国计量科学研究院热工计量科学研究所,北京,100013

Keywords:

全文HTML

参考文献 (0)