高功率激光装置熔石英紫外损伤增长研究?
Laser-induced damage growth of fused silica at 351 nm on a large-ap erture high-p ower laser facility
-
摘要: 基于大口径高功率激光装置开展了熔石英紫外损伤增长的实验研究。研究结果表明:在5 ns平顶脉冲的紫外激光辐照下,熔石英后表面损伤点尺寸随激光发次主要服从指数增长规律,且损伤增长速率随激光通量的增加而上升;但是,在相同的激光通量下损伤增长速率并非一个恒定值,而是存在一定的分布范围,说明除激光通量外还存在其他的影响因素。进一步的统计分析表明,在相同的激光通量下,小尺寸损伤点的平均增长速率高于大尺寸损伤点,表明损伤增长速率不仅与激光通量有关,还与损伤点尺寸有关。由于损伤增长主要源于损伤坑轴向和纵向裂纹在力学作用下发生扩展,因此小尺寸损伤点增长速率高于大尺寸损伤点增长速率说明小尺寸损伤点更易将激光能量耦合为弹性应变能。研究结果对熔石英使用寿命的精确预测和损伤机理的深入认识具有重要意义。Abstract: Laser-induced damage of fused silica optics at 351 nm is a key factor limiting the output energy of high-power laser facility, especially the damage growth process. A comprehensive understanding of its damage growth behavior is of critical importance for high-power laser facility. Thus we study the laser-induced damage growth on the exit surface of fused silica under the subsequent illumination of 5 ns square pulses at 351 nm on a large-aperture high-power laser facility. Experiment is conducted with a 36 cm thick UV grade fused silica focus lens in clean atmosphere and at room temperature. 56 laser shots of 3ω fluence in a range from 0.1 J/cm2 to 8.1 J/cm2 are fired during the experiment. And the damage initiation process and growth process are monitored and recorded with an online optics damage inspection instrument which has an optical resolution of about 50 μm.
Experimental results demonstrate that the sizes of exit-surface damage sites exponentially or linearly grow with laser shots and the damage growth rate increases with laser fluence. However, it is found that even under the same laser conditions the damage grow rate is not a fixed value, which means that besides the laser fluence other parameters also influence the damage grow process. In order to highlight some tendencies, we consider the single-shot damage growth rate and calculate the average of inside fluence bins. Statistical analysis shows that smaller sites tend to grow with larger growth rates than larger sites under the irradiation of the same laser fluence. This result indicates that damage growth rate is influenced by both laser fluence and damage site size. It suggests that the damage growth rule needs to be incorporated into a size-dependent growth effect.
The result that higher growth rates are obtained for small damage sites may be related to the damage growth mechanism of fused silica. Damage crater of fused silica consists of a central core and numerous surrounding cracks. The defects in the central core absorb laser energy and yield plasma, then the plasma pressure will open the cracks on the periphery of the crater and lead to lateral and axial expansion of cracks which can be identified as damage growth. The fact that smaller sites grow faster than larger sites implies that smaller sites more e?ciently couple laser energy into fracture energy. Our results have important implications for both the prediction of fused silica optics lifetime and the fundamental understanding of laser damage mechanism. -
-
计量
- 文章访问数: 322
- HTML全文浏览数: 102
- PDF下载数: 0
- 施引文献: 0