Keywords: 
• warping变换 /
• 模态提取 /
• 曲线拟合 /
• 海底衰减

Abstract: Seabed is an important part of the marine environment and it has a significant influence on sound propagation. Considering the fact that geoacoustic parameters are directly acquired with difficulty and complexity, a lot of researchers have focused on the inversion of them. The seabed attenuation coefficient is insensitivity to the matching field. However it has great effects on the transmission loss, mode amplitude ratios, etc. It can be inverted from measurements of these quantities. In this paper, we present an inversion scheme based on warping transform technique for estimating the seabed attenuation coefficient. It utilizes an equivalent seabed model which is constructed by using a prior and posterior knowledge. The dispersion characteristics of normal modes can be observed using the time-frequency analysis of the explosive signal recorded. The dispersion curve can be used to invert the seabed sound speed and density. The results presented by other scholars in the same circle are cited in this paper that focuses on how to obtain the seabed attenuation. Warping transform technique is used to separate and extract the normal modes. The main advantage of warping transform is that it can transform the time-frequency spectrogram into linear relationship which makes it easier to extract the normal modes. The feature of this paper lies in determining the distance normalized normal mode transmission loss. If the depths of receiving hydrophone and the explosion source are constant, the plot of normalized normal mode transmission loss versus distance is a straight line from the normal modes theory, which can be used to obtain the attenuation factor of real part of pressure. Then the seabed attenuation coefficient of the shallow water acoustic model can be calculated. In order to verify the effectiveness of this method, the warping transformation technology is used to separate and extract the first three modes from the simulated Gaussian pulse signal which is obtained in a simulated environment which is similar to the real marine environment. The extracted results are completely consistent with the numerical results. After that, the impulsive signal data collected in the Yellow Sea are analyzed according to the scheme process, and the relationship between the seabed attenuation and frequency is α = 0.581f 1.86k (dB/m) in a range from 150 Hz to 550 Hz. The results are in good agreement with those obtained by other scholars in the same circle. On the other hand, the inversion results of seabed attenuation from different modes can be used for comparison at the same frequency, which can be a good support for the result.