带螺旋支撑杆的同轴磁绝缘传输线三维数值模拟的实现

刘腊群; 刘大刚; 王学琼; 邹文康; 杨超

物理学报

, , , ,

刘腊群, 刘大刚, 王学琼, 邹文康, 杨超. 2012: 带螺旋支撑杆的同轴磁绝缘传输线三维数值模拟的实现, 物理学报, 61(16): 135-140.

引用本文:

刘腊群, 刘大刚, 王学琼, 邹文康, 杨超. 2012: 带螺旋支撑杆的同轴磁绝缘传输线三维数值模拟的实现, 物理学报, 61(16): 135-140.

2012: The implementation of the three-dimensional numerical simulation of the coaxial magnetically insulated transmission line with helical inductor, Acta Physica Sinica, 61(16): 135-140.

Citation:

2012: The implementation of the three-dimensional numerical simulation of the coaxial magnetically insulated transmission line with helical inductor, Acta Physica Sinica, 61(16): 135-140.

带螺旋支撑杆的同轴磁绝缘传输线三维数值模拟的实现

电子科技大学物理电子学院,成都,610054
中国工程物理研究院流体物理研究所,绵阳,621900

The implementation of the three-dimensional numerical simulation of the coaxial magnetically insulated transmission line with helical inductor

摘要: 依据实际器件尺寸，建立了带螺旋支撑杆的同轴磁绝缘传输线三维数值模拟模型；选取合适的二极管阴阳极间距作为传输线负载；设置相应的模拟参数对其进行模拟．将模拟结果与实验数据进行对比，证明了模拟的可靠性；并结合相应的实验数据，分析了同轴磁绝缘传输线在加入螺旋支撑结构后对其传输效率的影响．
- 三维数值模拟 /
- 螺旋支撑杆 /
- 磁绝缘传输线
Abstract: According to the actual device size, a three-dimensional numerical simulation model of the coaxial magnetically insulated trans- mission line with a helical inductor is developed. The diode with an appropriate distance between anode and cathode is selected as a load of the transmission line. Setting the device parameters, the device is simulated. Comparing the simulation results with the experimental data, the reliability of the simulation is proved. By combining with the corresponding experimental data, the transmission efficiency of the coaxial magnetically insulated transmission lines with adding the structure of helical inductor is analyzed.