[1] Jousten K. Handbook of vacuum technology (2nd Edition)[J]. WILEY,2016:584−593,697-700
[2] Li D T. A Review of the developing history and trend of Chinese vacuum metrology subject in the past 15 years ( 2004-2019)[J]. Vacuum & Cryogenics,2020,26(01):1−16 (李得天. 中国真空计量2004-2019年发展概况及趋势分析[J]. 真空与低温,2020,26(01):1−16(in chinese) doi: 10.3969/j.issn.1006-7086.2020.01.001 Li D T. A Review of the developing history and trend of Chinese vacuum metrology subject in the past 15 years ( 2004-2019)[J]. Vacuum & Cryogenics, 2020, 26(01): 1-16 doi: 10.3969/j.issn.1006-7086.2020.01.001
[3] Li D T, Wang Y J, Zhang H Z H, et al. Applications of vacuum measurement technology in china’s space programs[J]. Space: Science & Technology, 2021
[4] 李得天. 真空计量新技术[M]. 北京: 机械工业出版社, 2012 Li D T. New technology of vacuum metrology[M]. Beijing: China Machine Press, 2012
[5] Jousten K. Comparison of the standards for high and ultrahigh vacuum at three national standards laboratories[J]. Journal of Vacuum Science & Technology A Vacuum Surfaces and Films,1997,15(4):2395−2406
[6] Li D T,Feng Y,Li Z H. Application of spinning rotor gauge in partial pressure measurement[J]. Vacuum & Cryogenics,2000(04):41−45 (李得天,冯焱,李正海. 磁悬浮转子规在分压力测量中的应用[J]. 真空与低温,2000(04):41−45(in chinese) Li D T, FENG Y, LI ZH H. Application of spinning rotor gauge in partial pressure measurement[J]. Vacuum & Cryogenics, 2000, (04): 41-45
[7] Li Y,Guo M R,Ba D C,et al. The research history of spinning rotor gauge[J]. Chinese Journal of Vacuum Science and Technology,2021,41(11):1009−1018 (李宇,郭美如,巴德纯,等. 磁悬浮转子真空计的研究历程[J]. 真空科学与技术学报,2021,41(11):1009−1018(in chinese) Li Y, GUO M R, BA D CH, et al. The research history of spinning rotor gauge[J]. Chinese Journal of Vacuum Science and Technology, 2021, 41(11): 1009-1018
[8] Li D T. Study on transfer coefficient of spinning rotor gauge[J]. Vacuum & Cryogenics,2005(03):139−143+186 (李得天. 磁悬浮转子规传递系数的变化研究[J]. 真空与低温,2005(03):139−143+186(in chinese) doi: 10.3969/j.issn.1006-7086.2005.03.003 Li D T. Study on transfer coefficient of spinning rotor gauge[J]. Vacuum & Cryogenics, 2005(03): 139-143+186 doi: 10.3969/j.issn.1006-7086.2005.03.003
[9] Li D T,Xi Z H,Wang Y J,et al. Vacuum metrology technology and its space application[J]. Chinese Journal of Vacuum Science and Technology,2021,41(09):795−816 (李得天,习振华,王永军,等. 真空测试计量技术及其航天应用[J]. 真空科学与技术学报,2021,41(09):795−816(in chinese) Li D T, XI ZH H, WANG Y J, et al. Vacuum metrology technology and its space application[J]. Chinese Journal of Vacuum Science and Technology, 2021, 41(09): 795-816
[10] Fedchak J A,Arai K,Jousten K,et al. Recommended practices for the use of spinning rotor gauges in inter-laboratory comparisons[J]. Measurement,2015,66:176−183 doi: 10.1016/j.measurement.2015.02.012
[11] Li M H,Wang J T,Wu Y,et al. Key Technologies for performance optimization of eddy-current sensors[J]. Chinese Journal of Scientific Instrument,2019,40(07):233−243 (李满宏,王经天,吴玉,等. 电涡流传感器性能优化关键技术[J]. 仪器仪表学报,2019,40(07):233−243(in chinese) Li M H, WANG J T, WU Y, et al. Key Technologies for performance optimization of eddy-current sensors[J]. Chinese Journal of Scientific Instrument, 2019, 40(07): 233-243
[12] 李伟. 高精度高稳定性电涡流传感器的研究[D]. 合肥: 中国科学技术大学, 2018 Li W. Investigation on eddy current sensors with high precision and high stability[D]. University of Science and Technology of China, 2018
[13] 牛薇. 基于电涡流原理的转速传感器的设计[D]. 哈尔滨工业大学, 2014 Niu W. Design of rotational speed sensor based on the principle of eddy current[D]. Harbin Institute of Technology, 2014
[14] 吴桐. 主动磁悬浮轴承及其控制方法研究[D]. 沈阳: 沈阳工业大学, 2016 Wu T. Study on active magnetic bearings and the control method[D]. Shenyang University of Technology, 2016
[15] Zhang P,Zhong J. Design of displacement measurement system for eddy current sensor and performance analysis[J]. Instrumentation and Measurment,2019,38(07):115−118 (张萍,仲军. 电涡流传感器小位移测量系统设计及性能分析[J]. 自动化技术与应用,2019,38(07):115−118(in chinese) doi: 10.3969/j.issn.1003-7241.2019.07.025 Zhang P, Zhong J. Design of displacement measurement system for eddy current sensor and performance analysis[J]. Instrumentation and Measurment, 2019, 38(07): 115-118 doi: 10.3969/j.issn.1003-7241.2019.07.025
[16] Li H W,Liu S Q,Yu W T,et al. Maglev rotor axial displacement detection method using eddy current sensor[J]. Chinese Journal of Scientific Instrument,2011,32(07):1441−1448 (李红伟,刘淑琴,于文涛,等. 电涡流传感器检测磁悬浮转子轴向位移的方法[J]. 仪器仪表学报,2011,32(07):1441−1448(in chinese) Li H W, Liu S Q, Yu W T, et al. Maglev rotor axial displacement detection method using eddy current sensor[J]. Chinese Journal of Scientific Instrument, 2011, 32(07): 1441-1448
[17] Yang J,Zhang S M,Zeng L,et al. Simulation analysis of eddy current displacement sensor based on ANSYS[J]. Construction Machinery and Equipment,2021,52(03):40−44+8 (杨坚,张善猛,曾励,等. 基于ANSYS的电涡流位移传感器仿真分析[J]. 工程机械,2021,52(03):40−44+8(in chinese) doi: 10.3969/j.issn.1000-1212.2021.03.009 Yang J, ZHANG SH M, ZENG L, et al. Simulation analysis of eddy current displacement sensor based on ANSYS[J]. Construction Machinery and Equipment, 2021, 52(03): 40-44+8 doi: 10.3969/j.issn.1000-1212.2021.03.009
[18] Liu Z,Li W,Jin J X. Characteristic analysis and calibration method of eddy current sensor[J]. Machinery and Electronics,2013(02):14−16+20 (刘柱,李巍,金建新. 电涡流传感器的特性分析与标定方法[J]. 机械与电子,2013(02):14−16+20(in chinese) doi: 10.3969/j.issn.1001-2257.2013.02.004 Liu Zh, Li W, JIN J X. Characteristic analysis and calibration method of eddy current sensor[J]. Machinery and Electronics, 2013(02): 14-16+20 doi: 10.3969/j.issn.1001-2257.2013.02.004
[19] Zmood R B,Anand D K,Kirk J A. The influence of eddy currents on magnetic actuator performance[J]. Proceedings of the IEEE,1987,75(2):259−260 doi: 10.1109/PROC.1987.13726
[20] Xi Z H,Guo M R,Li B W,et al. Technology for Development of Metrological-grade Spinning Rotor Gauge[J]. Vacuum & Cryogenics,2022,28(04):409−419 (习振华,郭美如,李博文,等. 计量级磁悬浮转子真空计技术研究[J]. 真空与低温,2022,28(04):409−419(in chinese) Xi ZH H, Guo M R, Li B W, et al. Technology for Development of Metrological-grade Spinning Rotor Gauge[J]. Vacuum & Cryogenics, 2022, 28(04): 409-419