[1] Yuan J,Wu C,Li H,et al. Movement rules and screening characteristics of rice-threshed mixture separation through a cylinder sieve[J]. Computers and Electronics in Agriculture,2018,154:320−329 doi: 10.1016/j.compag.2018.09.012
[2] Zhou L,Lv W,Bai L,et al. CFD–DEM study of gas-solid flow characteristics in a fluidized bed with different diameter of coarse particles[J]. Energy Reports,2022,8:2376−2388 doi: 10.1016/j.egyr.2022.01.174
[3] Zhou H,Tian X,Kou M,et al. Numerical study of fine particles behaviors in a packed bed with lateral injection using CFD-DEM[J]. Powder Technology,2021,392:317−324 doi: 10.1016/j.powtec.2021.07.019
[4] Nian T,Wu H,Takara K,et al. Numerical investigation on the evolution of landslide-induced river blocking using coupled DEM-CFD[J]. Computers and Geotechnics,2021,134:104101 doi: 10.1016/j.compgeo.2021.104101
[5] Ma C,Feng Y,Lin H,et al. CFD-DEM investigation of blocking mechanism in pre-packed gravel screen[J]. Engineering Analysis with Boundary Elements,2021,132:416−426 doi: 10.1016/j.enganabound.2021.08.003
[6] Hongtu Z,Ouya Z,Botao L,et al. Effect of drill pipe rotation on gas-solid flow characteristics of negative pressure pneumatic conveying using CFD-DEM simulation[J]. Powder Technology,2021,387:48−60 doi: 10.1016/j.powtec.2021.04.017
[7] Wang Z,Hurter S,You Z,et al. Influences of negative pressure on air-leakage of coal seam gas extraction: laboratory and CFD-DEM simulations[J]. Journal of Petroleum Science and Engineering,2021,196:107731 doi: 10.1016/j.petrol.2020.107731
[8] Tang Z,Li X,Chen X,et al. Design of negative pressure spiral feeding device for tangential and longitudinal axial intersection of combine harvester[J]. Advances in Materials Science and Engineering,2019,2019:1−12
[9] Peng H,Nie W,Zhang S,et al. Research on negative pressure jet dust-removal water curtain technology for coal mine cleaner production[J]. Fuel,2022,310:122378 doi: 10.1016/j.fuel.2021.122378
[10] Bang J I,Park J,Choi A,et al. Evaluation of UR-UVGI system for sterilization effect on microorganism contamination in negative pressure isolation ward[J]. Sustainability,2018,10(9):3192 doi: 10.3390/su10093192
[11] Zhang Y,Han O,Li A,et al. Adaptive wall-based attachment ventilation: a comparative study on its effectiveness in airborne infection isolation rooms with negative pressure[J]. Engineering,2022,8:130−137 doi: 10.1016/j.eng.2020.10.020
[12] 陈活枝. 基于CFD-DEM的散货卸料过程粉尘产生机理及螺旋料斗抑尘方法[D]. 武汉理工大学, 2019. Chen H. Dust generation mechanism and suppression method of spiral hopper in bulk discharging process based on CFD-DEM[D]. Wuhan University of Technology, 2019
[13] Ji S,Ge J,Gao T,et al. Study on machinability of surface-constrained softness abrasive flow based on CFD-DEM coupled method[J]. Journal of Mechanical Engineering,2018,54(05):129−141 (计时鸣,葛江勤,高涛,等. 基于CFD-DEM耦合的面约束软性磨粒流加工特性研究[J]. 机械工程学报,2018,54(05):129−141(in chinese) Ji S, Ge J, Gao T, et al. Study on machinability of surface-constrained softness abrasive flow based on CFD-DEM coupled method[J]. Journal of Mechanical Engineering, 2018, 54(05): 129-141.
[14] Zhou J,Shangguan L,Xu L,et al. Mechanism and characteristics of light medium mixed flow pneumatic conveying for coarse particle[J]. Journal of Mechanical Engineering,2022,58(14):308−319 (周甲伟,上官林建,许兰贵,等. 粗重颗粒轻介共流气力输送机理及特性[J]. 机械工程学报,2022,58(14):308−319(in chinese) Zhou J, Shangguan L, Xu L, et al. Mechanism and Characteristics of Light Medium Mixed Flow Pneumatic Conveying for Coarse Particle[J]. Journal of Mechanical Engineering, 2022,58(14):308-319.
[15] Chen L,Sun Z,Ma H,et al. Flow characteristics of pneumatic conveying of stiff shotcrete based on CFD-DEM method[J]. Powder Technology,2022,397:117109
[16] Li T,Zhang H,Kuang S,et al. Experimental and numerical study of coarse particle conveying in the small absorber sphere system: overview and some recent CFD-DEM simulations[J]. Nuclear Engineering and Design,2020,357:110420 doi: 10.1016/j.nucengdes.2019.110420
[17] Zhang H,Li T,Huang Z,et al. Investigation on vertical plug formation of coarse particles in a non-mechanical feeder by CFD-DEM coupling method[J]. Powder Technology,2018,332:79−89 doi: 10.1016/j.powtec.2018.03.055
[18] Zhou J,Shangguan L,Gao K,et al. Pickup characteristics of lump non-spherical particles in an oscillating airflow[J]. Industrial & Engineering Chemistry Research,2020,59(31):14145−14156
[19] Du F,Guo Y,Wang L,et al. EDEM-FLUENT coupled simulation of coal-gas outburst two-phase flow[J]. Energy Exploration & Exploitation,2021,39(5):1786−1802
[20] Ji Y,Liu S,Li J. Experimental and numerical studies on dense-phase pneumatic conveying of spraying material in venturi[J]. Powder Technology,2018,339:419−433 doi: 10.1016/j.powtec.2018.08.031