[1] |
Scheper G W. The Vortex Tube; Internal flow data and a heat transfer theory[J]. J ASRE Refrigerating Engineering, 1951
|
[2] |
Behera U,Paul P J,Dinesh K,et al. Numerical investigations on flow behaviour and energy separation in ranque-hilsch vortex tube[J]. International Journal of Heat & Mass Transfer,2008,51(25-26):6077−6089
|
[3] |
Deissler R G,Perlmutter M. Analysis of the flow and energy separation in a turbulent vortex[J]. International Journal of Heat & Mass Transfer,1960,1(2-3):173−191
|
[4] |
Saidi M H,Valipour M S. Experimental modeling of vortex tube refrigerator[J]. International Journal of Refrigeration,2011,23(15):1971−1980
|
[5] |
Kurosaka M. Acoustic streaming in swirling flow and the ranque—hilsch (vortex−tube) effect[J]. Journal of Fluid Mechanics,1982,124(-1):139 doi: 10.1017/S0022112082002444
|
[6] |
Reed G A. Vortex tube refrigeration [D]. Massachusetts Institute of Technology, Department of Aeronautical Engineering, 1947
|
[7] |
Bruno,Thomas J. Laboratory applications of the vortex tube[J]. Journal of Chemical Education,1987,64(11):987−988 doi: 10.1021/ed064p987
|
[8] |
A compressed gas−powered heating system for underwater diver [P]. US Patent, 1986
|
[9] |
Arslan, Oguz, Acar, et al. Exergo−economic evaluation of a new drying system boosted by ranque-hilsch vortex tube[J]. Applied Thermal Engineering: Design, Processes, Equipment, Economics, 2017.
|
[10] |
Raterman K T, Mckellar M, Podgorney, A, et al. A vortex contactor for carbon dioxide separations [R]. In First National Conference on Carbon Sequestration. National Energy Technology Laboratory, U S A. 2001
|
[11] |
Liew R R . Droplet Behaviour and thermal separation in ranque-hilsch vortex tubes / raoul liew[J]. Technische Universiteit Eindhoven, 2013
|
[12] |
Zhidkov M A,Devisilov V A,Zhidkov A,et al. Thermodynamics of the ranque-hilsch effect in the three-flow vortex tubes[J]. Theoretical Foundations of Chemical Engineering,2015,49(4):523−531 doi: 10.1134/S0040579515040211
|
[13] |
Wang P,Jiang R,Song F,et al. Experimental Study on the Effect of Vortex Chamber's Structure[J]. Energy Conservation,2006(6):7−10 (王朋涛,姜任秋,宋福元,等. 涡流室结构特性实验研究[J]. 节能,2006(6):7−10(in chinese)
Wang P, Jiang R, Song F, et al. Experimental Study on the Effect of Vortex Chamber's Structure [J]. Energy Conservation, 2006, 2006(6): 7-10.
|
[14] |
Wang Y,Lin M. Experimental study on the effect of the length of hot end tube on the performance of vortex tube[J]. Refrigeration and Air-Conditioning,2008,8(1):11−13 (王远鹏,林明峰. 热端管长度对涡流管性能影响的试验研究[J]. 制冷与空调,2008,8(1):11−13(in chinese)
Wang Y, Lin M. Experimental Study on the Effect of the Length of Hot End Tube on the Performance of Vortex Tube [J]. Refrigeration and Air-Conditioning, 2008, 8(1):11-13.
|
[15] |
Zhou S,Jiang R,Song F,et al. Experimental investigations into the influences of inlet pressure and cold air fraction on the refrigerating performance of a vortex tube[J]. Journal of Basic Science and Engineering,2006,14(4):543−549 (周少伟,姜任秋,宋福元,等. 入口压力与冷气流率对涡流管制冷性能影响研究[J]. 应用基础与工程科学学报,2006,14(4):543−549(in chinese)
Zhou S, Jiang R, Song F, et al. Experimental Investigations Into the Influences of Inlet Pressure and Cold Air Fraction on the Refrigerating Performance of a Vortex Tube [J]. Journal of Basic Science and Engineering, 2006, 14(4): 543-549.
|
[16] |
Gong D,Mao J,Deng M,et al. Experiment on influences of inlet temperature and pressure on vortex tube's performance[J]. Journal of Aerospace Power,2017,32(3):599−606 (龚迪澜,毛军逵,邓明,等. 进气温度与压力对涡流管性能影响的实验[J]. 航空动力学报,2017,32(3):599−606(in chinese)
Gong D, Mao J, Deng M, et al. Experiment on Influences of Inlet Temperature and Pressure on Vortex Tube's Performance [J]. Journal of Aerospace Power, 2017, 32 (3): 599-606.
|
[17] |
Shen J,Bian Y,Guo X. Experimental study on the effect of cold end aperture on the performance of vortex tube[J]. Journal of Refrigeration,2017,38(6):87−93 (申江,边煜竣,郭欣炜. 冷端孔径对涡流管性能影响的实验研究[J]. 制冷学报,2017,38(6):87−93(in chinese)
Shen J, Bian Y, Guo X. Experimental Study on the Effect of Cold End Aperture on the Performance of Vortex Tube [J]. Journal of Refrigeration, 2017, 38 (6): 87-93.
|
[18] |
He L,Zhang L,Sun S,et al. Effect of Cold Plate Aperture and Inlet Pressure on Vortex-Tube Performance: An Experimental Study[J]. Chinese Journal of Vacuum Science and Technology,2020,40(3):280−285 (何丽娟,张磊,孙尚志,等. 冷孔板孔径及进口压力对涡流管性能影响的实验研究[J]. 真空科学与技术学报,2020,40(3):280−285(in chinese)
He L, Zhang L, Sun S, et al. Effect of Cold Plate Aperture and Inlet Pressure on Vortex-Tube Performance: An Experimental Study [J]. Chinese Journal of Vacuum Science and Technology, 2020, 40(3): 280-285.
|
[19] |
Dutta T,Sinhamahapatra K P,Bandyopdhyay S S. Comparison of different turbulence models in predicting the temperature separation in a ranque–hilsch vortex tube[J]. International Journal of Refrigeration,2010,33(4):783−792 doi: 10.1016/j.ijrefrig.2009.12.014
|
[20] |
Liu X,Liu Z. Investigation of the energy separation effect and flow mechanism inside a vortex tube[J]. Applied Thermal Engineering,2014,67(1-2):494−506 doi: 10.1016/j.applthermaleng.2014.03.071
|
[21] |
Aljuwayhel N F,Nellis G F,Klein S A. Parametric and internal study of the vortex tube using a cfd model[J]. International Journal of Refrigeration,2005,28(3):442−450 doi: 10.1016/j.ijrefrig.2004.04.004
|
[22] |
Thakare H R,Parekh,A D. Computational analysis of energy separation in counter—flow vortex tube[J]. Energy,2015,85:62−77 doi: 10.1016/j.energy.2015.03.058
|
[23] |
Gao M. Analysis on Prevention Measures of Gas Well Wellhead Hydrate[J]. Yunnan Chemical Technology,2018,45(1):200 (高美尧. 气井井口水合物防止措施浅析[J]. 云南化工,2018,45(1):200(in chinese)
Gao M. Analysis on Prevention Measures of Gas Well Wellhead Hydrate [J]. Yunnan Chemical Technology, 2018, 45 (1):200.
|