[1] Yuxing Li,Shuaiwei Gu,Datong Zhang,et al. An experimental study on the choked flow characteristics of CO2 pipelines in various phases[J]. Chinese Journal of Chemical Engineering,2021,32(04):17−26
[2] Ren M Q. Control valve cavitation causes and avoid method[J]. Control Engineering of China,2014,21(S1):118−120 (任明强. 控制阀气蚀产生的原因及避免方法[J]. 控制工程,2014,21(S1):118−120(in chinese) doi: 10.14107/j.cnki.kzgc.2014.s1.005 Ren M Q. Control Valve Cavitation Causes and Avoid Method[J]. Control Engineering of China, 2014, 21(S1): 118-120 doi: 10.14107/j.cnki.kzgc.2014.s1.005
[3] Yu Q Z,Li B,Wang F,et al. Design and simulation of angular vacuum interface valve for sewage discharge[J]. Chinese Journal of Vacuum Science and Technology,2021,41(10):986−992 (余清洲,李斌,王飞,等. 角座式真空排污界面阀的设计与模拟研究[J]. 真空科学与技术学报,2021,41(10):986−992(in chinese) doi: 10.13922/j.cnki.cjvst.202102008 Yu Q Z, Li B, Wang F, et al. Design and Simulation of Angular Vacuum Interface Valve for Sewage Discharge[J]. Chinese Journal of Vacuum Science and Technology, 2021, 41(10): 986-992 doi: 10.13922/j.cnki.cjvst.202102008
[4] Ma G F,Ji J K,Ding P,et al. Flow characteristics of solid-liquid two-phase with swirl valve under different particle properties[J]. Journal of Drainage and Irrigation Machinery Engineering,2020,38(12):1245−1250 (马光飞,季健康,丁鹏,等. 不同颗粒属性下旋流阀固液两相管道流动特性[J]. 排灌机械工程学报,2020,38(12):1245−1250(in chinese) Ma G F, Ji J K, Ding P, et al. Flow characteristics of solid-liquid two-phase with swirl valve under different particle properties[J]. Journal of Drainage and Irrigation Machinery Engineering, 2020, 38(12): 1245− 1250
[5] Yu K X,Shang Q L,Wu X,et al. Analysis of cavitation for orifice plates[J]. China Mechanical Engineering,2021,32(03):290−296 (俞轲鑫,尚群立,吴欣. 节流孔板空化特性分析[J]. 中国机械工程,2021,32(03):290−296(in chinese) doi: 10.3969/j.issn.1004-132X.2021.03.006 Yu K X, Shang Q L, Wu X, et al. Analysis of Cavitation for Orifice Plates[J]. China Mechanical Engineering, , 2021, 32(03): 290-296 doi: 10.3969/j.issn.1004-132X.2021.03.006
[6] Fang Liang,Xiaogang Xu,Anjun Li,et al. Numerical investigation on the flow characteristics and choking mechanism of cavitation-induced choked flow in a Venturi reactor[J]. Chemical Engineering Journal,2021:423
[7] Andrea Cioncolini,Fabio Scenini,Jonathan Duff,et al. Choked cavitation in micro-orifices: an experimental study[J]. Experimental Thermal and Fluid Science,2016,74:49−57 doi: 10.1016/j.expthermflusci.2015.12.004
[8] Zhou B,Zhang Y N,Wang L L,et al. Study on crack growth mechanism of wind turbine blade based on fluid solid coupling[J]. Fluid Machinery,2017,45(08):19−23 (周勃,张亚楠,王琳琳,等. 基于流固耦合的风力机叶片裂纹扩展机理研究[J]. 流体机械,2017,45(08):19−23(in chinese) doi: 10.3969/j.issn.1005-0329.2017.08.005 Zhou B, Zhang Y N, Wang L L, et al. Study on Crack Growth Mechanism of Wind Turbine Blade Based on Fluid Solid Coupling[J]. Fluid Machinery, 2017, 45(08): 19-23 doi: 10.3969/j.issn.1005-0329.2017.08.005
[9] 毛翼轩,王英铸,李涛,等.不对称导管对船后桨空化性能的影响[J/OL].哈尔滨工程大学学报: 1−8[2021-05-27] Mao Y X, Wang Y Z, Li T, et al. Research on the effect of asymmetric duct on the ship propeller cavitation performance[J/OL]. Journal of Harbin Engineering University: 1−8[2021-05-27]
[10] Yu X L,Wang S J,Yuan P,et al. The study on the applicability of two turbulence models in the tidal turbine[J]. Periodical of Ocean University of China,2019,49(02):114−120 (于晓丽,王树杰,袁鹏,等. 两种湍流模型在潮流能水轮机数值模拟中的适用性研究[J]. 中国海洋大学学报(自然科学版),2019,49(02):114−120(in chinese) doi: 10.16441/j.cnki.hdxb.20160221 Yu X L,Wang S J,Yuan P, et al.The study on the applicability of two turbulence models in the tidal turbine[J].Periodical of Ocean University of China, 2019,49(02):114-120 doi: 10.16441/j.cnki.hdxb.20160221
[11] Tong C B,Zhou Z X,Yan Q X,et al. Air admission feature and discharge coefficient of fixed conical valve[J]. Journal of System Simulation,2018,30(08):3188−3197 (童成彪,周志雄,阎秋霞. 固定锥形阀的补气及排放系数研究[J]. 系统仿真学报,2018,30(08):3188−3197(in chinese) doi: 10.16182/j.issn1004731x.joss.201808045 Tong C B, Zhou Z X, Yan Q X, et al. Air Admission Feature and Discharge Coefficient of Fixed Conical Valve[J]. Journal of System Simulation, 2018, 30(08): 3188-3197 doi: 10.16182/j.issn1004731x.joss.201808045
[12] Fu Y,Long Y,Long X P,et al. Simulation research on flow in air flotation contact zone based on different multiphase flow models[J]. Editorial Board of Journal of Hydrodynamics et al,2019:341−346 (伏雨,龙云,龙新平. 基于不同多相流模型的气浮接触区流动的模拟研究[J]. 《水动力学研究与进展》编委会等,2019:341−346(in chinese) Fu Y, Long Y, Long X P, et al. Simulation Research on Flow in Air Flotation Contact Zone Based on Different Multiphase Flow Models[J]. Editorial Board of Journal of Hydrodynamics et al. 2019: 341-346
[13] IEC60534 SA-RP 7523-1995-Considerations for Evaluating Control Valve Cavitation
[14] GB/T 17213.2-2005 工业过程控制阀 第2-1 部分 安装条件下流体流量系数的计算 GB/T 17213.2-2005 Industrial-process control valves-Part 2-1 : Flow capacity-Sizing equations for fluid flow under installed conditions
[15] GB/T 17213.9-2005 工业过程控制阀 第2-3部分流通能力试验程序 GB/T 17213.9-2005 Industrial-process control valves-Part 2-3: Flow capacity-Test procedures