[1] Smith M F. Hall A C, Fleetwood J D, et al. Very low pressure plasma spray—a review of an emerging technology in the thermal spray community[J]. Coatings,2011,1(2):117 doi: 10.3390/coatings1020117
[2] Wen J. Song C, Liu T, et al. Fabrication of dense gadolinia-doped ceria coatings via very low pressure plasma spray and plasma spray–physical vapor deposition process[J]. Coatings,2019,9(11):717 doi: 10.3390/coatings9110717
[3] Yang Linghua,Zhang Minquan,Liu Haibin,et al. Tribological behavior of Al-Si composite coatings on Mg substrate[J]. Chinese Journal of Vacuum Science and Technology,2015(3):301−305 (杨灵华,张民权,刘海彬,等. Mg合金基体表面碳增强Al-Si复合涂层摩擦学性能研究[J]. 真空科学与技术学报,2015(3):301−305(in chinese) Yang Linghua, Zhang Minquan, Liu Haibin, et al. Tribological behavior of Al-Si composite coatings on Mg substrate[J]. Chinese Journal of Vacuum Science and Technology, 2015(3):301-305
[4] Sun Chengqi ,Gao Yang ,Yang Deming,et al. Characterization of electron density and temperature in atmospheric thermal plasma Spray[J]. Chinese Journal of Vacuum Science and Technology,2013(12):1209−1213 (孙成琪,高阳,杨德明,等. 大气热喷涂等离子体射流中电子温度和电子密度的测量[J]. 真空科学与技术学报,2013(12):1209−1213(in chinese) Sun Chengqi ,Gao Yang , Yang Deming, et al. Characterization of Electron Density and Temperature in Atmospheric Thermal Plasma Spray[J]. Chinese Journal of Vacuum Science and Technology, 2013(12):1209-1213
[5] Kuang Ziqi,Dai Mingjiang,Xiong Guogang,et al. Tungsen coating on mo substrate by vacuum plasma spray[J]. Chinese Journal of Vacuum Science and Technology,2005,25(5):381−384 (邝子奇,代明江,熊国刚,等. 钼基体上真空等离子体喷涂钨涂层的研究[J]. 真空科学与技术学报,2005,25(5):381−384(in chinese) Kuang Ziqi, Dai Mingjiang, Xiong Guogang, et al. Tungsen Coating on Mo Substrate by Vacuum Plasma Spray[J]. Chinese Journal of Vacuum Science and Technology, 2005(5):381-384
[6] Niessen K V. Gindrat M, Refke A. Vapor phase deposition using plasma spray-PVD[J]. Journal of Thermal Spray Technology,2010,19(1-2):502 doi: 10.1007/s11666-009-9428-9
[7] Niessen K V. Gindrat M. Plasma spray-PVD: a new thermal spray process to deposit out of the vapor phase[J]. Journal of Thermal Spray Technology,2011,20(4):736 doi: 10.1007/s11666-011-9654-9
[8] Hospach A. Mauer G, VaßenDetlev R, et al. Columnar-structured thermal barrier coatings (TBCs) by thin film low-pressure plasma spraying (LPPS-TF)[J]. Journal of Thermal Spray Technology,2011,20(1-2):116−120 doi: 10.1007/s11666-010-9549-1
[9] Hirschfeld D A , Spinhirne N R , Hall A C . The development and characterization of novel yttria-stabilized zirconia coatings deposited by very low pressure plasma spray[C]// International Thermal Spray Conference (ITSC) 2009 American Society for Metals. 2009.
[10] Erich M . Apparatus for and method of forming uniform thin coatings on large substrates:, EP0776594B1[P]. 2002.
[11] T. Liu, S[J]. Deng, M. Planche, et al. Estimating the behavior of particles sprayed by a single-cathode plasma torch based on a nonlinear autoregressive exogenous model[J]. Surface & Coatings Technology,2015(268):284
[12] Mahaffey J. Vackel A, Whetten S, et al. Structure evolution and corrosion performance of CoCrFeMnNi high entropy alloy coatings produced via plasma spray and cold spray[J]. Journal of Thermal Spray Technology,2022,31(4):1143 doi: 10.1007/s11666-022-01373-5
[13] Ni Liyong,Qi Peng,Yang Zhenxiao,et al. Application and development of low pressure plasma Spray-Thin film[J]. Thermal Spray Technology,2014(3):7−12 (倪立勇,戚鹏,杨震晓,等. 超低压等离子喷涂技术及应用[J]. 热喷涂技术,2014(3):7−12(in chinese) Ni Liyong, Qi Peng, Yang Zhenxiao, et al. Application and Development of Low Pressure Plasma Spray-Thin Film[J]. Thermal Spray Technology, 2014, (3):7-12
[14] Yuan Tong,Deng Changguang,Mao Jie,et al. Preparation and thermal conductivity of 7YSZ thermal barrier coatings prepared by plasma spray-physical vapor deposition[J]. Journal of Materials Engineering,2017(45):1−6 (袁佟,邓畅光,毛杰,等. 等离子喷涂-物理气相沉积制备7YSZ热障涂层及其热导率研究[J]. 材料工程,2017(45):1−6(in chinese) YUAN Tong, DENG Changguang, MAO Jie, et al. Preparation and Thermal Conductivity of7YSZ Thermal Barrier Coatings Prepared by Plasma Spray-physical Vapor Deposition[J]. Journal of Materials Engineering, 2017, (45):1-6
[15] lin feng ,yu yueguang,jiang xianliang,et al. Microstructures and properties of nanostructured TBCs fabricated by plasma spraying[J]. The Chinese Journal of Nonferrous Metals,2006,16(3):482−487 (林锋,于月光,蒋显亮,等. 等离子体喷涂纳米结构热障涂层微观组织及性能[J]. 中国有色金属学报,2006,16(3):482−487(in chinese) LIN Feng ,YU Yueguang, JIANG Xianliang, et al. Microstructures and properties of nanostructured TBCs fabricated by plasma spraying[J]. The Chinese Journal of Nonferrous Metals, 2006, 16(3):482-487
[16] Lin Feng ,yu Yueguang,Jiang Xianliang,et al. Research on processing of YPSZ nanostructured particles for thermal spraying[J]. Journal of Materials Science & Engineering,2006,24(1):66−69 (林锋,于月光,蒋显亮,等. YPSZ纳米结构热喷涂粉末材料工艺优化研究[J]. 材料科学与工程学报,2006,24(1):66−69(in chinese) LIN Feng ,YU Yueguang, JIANG Xianliang, et al. Research on Processing of YPSZ Nanostructured Particles for Thermal Spraying[J]. Journal of Materials Science & Engineering, 2006, 24(1):66-69
[17] Lin Feng ,yu Yueguang,Zeng Keli,et al. Research on fabricating modeling and mechanism of nanostructured YPSZ for thermal spraying[J]. Nonferrous Metals,2006(z1):5−8 (林锋,于月光,曾克里,等. YPSZ纳米结构热喷涂粉末材料制备机理及模型研究[J]. 有色金属:冶炼部分,2006(z1):5−8(in chinese) LIN Feng ,YU Yueguang, ZENG Keli, et al. Research on Fabricating Modeling and Mechanism of Nanostructured YPSZ for Thermal Spraying[J]. Nonferrous Metals, 2006(z1):5-8
[18] Ge Xuelian ,Niu Yaran ,Li Hong ,et al. Study on fabrication and properties of ZrC-SiC composite coating prepared by vacuum plasma spray[J]. Hot Working Technology,2015,44(4):193−196 (葛雪莲,牛亚然,李红,等. 真空等离子体喷涂ZrC-SiC复合涂层及性能研究[J]. 热加工工艺,2015,44(4):193−196(in chinese) GE Xuelian , NIU Yaran , LI Hong , et al. Study on Fabrication and Properties of ZrC-SiC Composite Coating Prepared by Vacuum Plasma Spray[J]. Hot Working Technology, 2015, 44(4):193-196
[19] Li Dachuan ,Zhao Huayu,Zhong Xinghua,et al. Research progresses of atmospheric plasma sprayed splat[J]. Journal of Inorganic Materials,2017,32(6):571−580 (李大川,赵华玉,钟兴华,等. 大气等离子体喷涂的单片层研究进展[J]. 无机材料学报,2017,32(6):571−580(in chinese) LI Dachuan , ZHAO Huayu, ZHONG Xinghua, et al. Research Progresses of Atmospheric Plasma Sprayed Splat[J]. Journal of Inorganic Materials, 2017, 32(6):571-580
[20] Tan Chao,Wei Zhengying,Wei Pei,et al. Numerical analysis of plasma flow with supersonic plasma gun[J]. Journal of Propulsion Technology,2015,36(1):30−36 (谭超,魏正英,魏培,等. 内送粉超声速等离子喷涂流场特性分析[J]. 推进技术,2015,36(1):30−36(in chinese) Tan Chao, Wei Zhengying, Wei Pei, et al. Numerical Analysis of Plasma Flow with Supersonic Plasma Gun[J]. Journal of Propulsion Technology, 2015, 36(1):30-36
[21] Tan Chao,Wei Zhengying,Wei Pei,et al. Analysis of melting and refining process of supersonic plasma spraying particles[J]. Journal of Propulsion Technology,2016,37(5):930−936 (谭超,魏正英,魏培,等. 超声速等离子喷涂颗粒加热熔化与细化过程分析[J]. 推进技术,2016,37(5):930−936(in chinese) Tan Chao, Wei Zhengying, Wei Pei, et al. Analysis of Melting and Refining Process of Supersonic Plasma Spraying Particles [J]. Journal of Propulsion Technology, 2016, 37(5):930-936
[22] Wang Wei,Wang Yan,Xiang Xudong,et al. Studies on the property of thermal barrier coating (TBC) prepared by different ways[J]. Dongfang Turbine,2011(3):66−74 (王伟,王焱,向旭东,等. 不同方法制备的TBC涂层特性的研究[J]. 东方汽轮机,2011(3):66−74(in chinese) doi: 10.13808/j.cnki.issn1674-9987.2011.03.003 Wang Wei, Wang Yan, Xiang Xudong, et al. Studies on the Property of Thermal Barrier Coating (TBC) Prepared by Different Ways[J]. Dongfang Turbine, 2011(3):66-74 doi: 10.13808/j.cnki.issn1674-9987.2011.03.003
[23] Gao Yang,Yang Deming. The characteristic of plasma torch designed for the very low-pressureplasma spraying[J]. Thermal Spray Technology,2011,3(3):65−70 (高阳,杨德明. 超低压等离子喷涂喷嘴设计与喷枪特性[J]. 热喷涂技术,2011,3(3):65−70(in chinese) Gao Yang, Yang Deming. The Characteristic of Plasma Torch Designed for the Very Low-PressurePlasma Spraying[J]. Thermal Spray Technology, 2011, 3(3):65-70
[24] Khor K A. Cu Y W. Thermal properties of plasma-sprayed functionally graded thermal barrier coatings[J]. Thin Solid Films:An International Journal on the Science and Technology of Thin and Thick Films,2000(1/2):372