[1] Wang H. Zhao K X, Chu X R, et al. Constitutive modelling and microscopic analysis of TC4 alloy sheet at elevated temperature[J]. Results in Physics,2019,13:102−122
[2] Ottria L. Lauritano D, Bassi M A. Mechanical, chemical and biological aspects of titanium and titanium alloys in implant dentistry[J]. Journal of Biological Regulators and Homeostatic Agents,2018,32:81−90
[3] Paula L O. Sene A C, Manfroi L A, et al. Tribo-Corrosion and Corrosion Behaviour of Titanium Alloys with and With DLC Films Immersed in Synthetic Urine[J]. Journal of Bio- and Tribo-Corrosion,2018,4:51−56 doi: 10.1007/s40735-018-0166-8
[4] Ovchinnikov V. Kurbatova I, Uchevatkina N. Determination of the effect of surface treatment on the physicomechanical properties of a titanium alloy[J]. Materialstody proceedings,2021,38:1405−1408
[5] Kong C C. Guo P, Sun L L, et al. Tribological mechanism of diamond-like carbon films induced by Ti/Al co-doping[J]. Surface and Coatings Technology,2018,342:167−177 doi: 10.1016/j.surfcoat.2018.02.098
[6] Ferrari A C. Robertson J. Raman spectroscopy of amorphous, nanostructured, diamond–like carbon, and nanodiamond[J]. Physical and Engineering Sciences,2004,362(1824):2477−2512 doi: 10.1098/rsta.2004.1452
[7] 薛群基, 王立平. 类金刚石碳基薄膜材料[M]. 科学出版社, 2012. Xue qunji, Wang liping. Diamond-like carbon based film materials [M].Science press, 2012
[8] Erdemir A. Genesis of superlow friction and wear in diamondlike carbon films[J]. Tribology International,2004,37(11):1005−1012
[9] H. H[J]. Ding, V. Fridrici, J. Geringer, et al. Influence of diamond-like carbon coatings and roughness on fretting behaviors of Ti-6Al-4V for neck adapter-femoral stem contact[J]. Wear,2018,6:53−67
[10] Jacek Grabarczyk. Justyna Gaj, Bartosz Pazik, et al. Tribocorrosion behavior of Ti6Al4V alloy after thermo-chemical treatment and DLC deposition for biomedical applications[J]. Tribology International,2021,153:106560 doi: 10.1016/j.triboint.2020.106560
[11] Yusei Yamada. Motoyuki Murashima, Noritsugu Umehara, et al. Effect of fracture properties and surface morphology on wear of DLC coatings at severe contact condition[J]. Tribology International,2022,169:107486 doi: 10.1016/j.triboint.2022.107486
[12] Ziyuan Zhao. Pengfei Hui, Fuyuan Liu, et al. A key to tune the grain size gradient of the TiC coating on titanium by interstitial carburization: The timing for pressing[J]. Journal of Alloys and Compounds,2020,817:152725 doi: 10.1016/j.jallcom.2019.152725
[13] Viswanathan S. Mohan L, Parthasarathi B, et al. Corrosion and wear resistance properties of multilayered diamond-like carbon nanocomposite coating[J]. Surface and Interface Analysis,2018,50:12−16
[14] Jones M I. McColl I R, Grant D M, et al. compatibility of DLC and TiC-TiN interlayers on titanium[J]. Diamond and Related Materials,2016,8:457−462
[15] Wang K L. Zhou H, Zhang K F, et al. Effects of Ti interlayer on adhesion property of DLC films: A first principle study[J]. Diamond and Related Materials,2021,111:108188 doi: 10.1016/j.diamond.2020.108188
[16] Duan Z W,Qiao L,Chai L Q,et al. Structure, properties and growth mechanism of a self-assembled nanocylindrical MoS2/Mo-SC composite film[J]. Applied Surface Science,2019,465:564−574 doi: 10.1016/j.apsusc.2018.09.076
[17] Ding H H. Fridrici V, Geringer J, et al. Influence of diamond-like carbon coatings and roughness on fretting behaviors of Ti-6Al-4V for neck adapter-femoral stem contact[J]. Wear,2018,6:53−67
[18] Bahi R. Nouveau C, Beliardouh N E, et al. Surface performances of Ti-6Al-4V substrates coated PVD multilayered films in biological environments[J]. Surface and Coatings Technology,2020,385:125412 doi: 10.1016/j.surfcoat.2020.125412
[19] Cao H S. Ye X, Li H, et al. Microstructure, mechanical and tribological properties of multilayer Ti-DLC thick films on Al alloys by filtered cathodic vacuum arc technology[J]. Materials & Design,2021,198:109320
[20] Zhang D. Yi P Y, Peng L F, et al. Amorphous carbon films doped with silver and chromium to achieve ultra-low interfacial electrical resistance and long-term durability in the application of proton exchange membrane fuel cells[J]. Carbon,2019,145:333−344 doi: 10.1016/j.carbon.2019.01.050
[21] Wang Y F. Gao K X, Zhang B, et al. Structure effects of sp2-rich carbon films under super-low friction contact[J]. Carbon,2018,137:49−56 doi: 10.1016/j.carbon.2018.05.016
[22] Tao Y. Jianwei M, Zhenyuan J, et al. Microstructure, Mechanical Properties and Low-temperature Tribological Behavior of Cr/Cr-W/W-DLC/DLC Multilayer Coatings on 5A06 Al Alloy[J]. Journal of Materials Research and Technology,2022,5:204353
[23] Li L,Liu L L,Li X,Guo P,Ke P,Wang A. Enhanced tribocorrosion performance of Cr/GLC multilayered films for marine protective application[J]. ACS applied materials & interfaces,2018,10:13187−13198
[24] Kashyap A. Harsha A P, Kondaiah P, et al. Study on galling behaviour of HiPIMS deposited Mo/DLC multilayer coatings at ambient and elevated temperature[J]. Wear,2022,11:204327
[25] Xu Z Y. Zhen Y J, Su H, et al. Numerical and experimental study of residual stress of multilayer diamond-like carbon films prepared by filtered cathodic vacuum arc deposition[J]. IEEE Transactions on Plasma Science,2012,9:2261−2266
[26] Laconte J. Iker F, Jorez S, et al. Thin films stress extraction using micromachined structures and wafer curvature measurements[J]. Microelectronic Engineering,2004,76:219−226 doi: 10.1016/j.mee.2004.07.003
[27] 徐照英. 类金刚石(DLC)多层薄膜残余应力调控及其机械性能研究[D]. 成都: 西南交通大学, 2013 Xu zhaoying.The residual stress control and mechanical properties of multilayer diamond like carbon films[D]. Chengdu, Southwest Jiaotong University, 2013
[28] Matthews A. Jones R, Dowey S. Modelling the deformation behaviour of multilayer coatings[J]. Tribology Letters,2001,11(2):103−106 doi: 10.1023/A:1016667932251
[29] Dumkum C. Grant D M, MeColl I R. A multilayer approach to high adhesion diamond like carbon coatings on titanium[J]. Diamond and Related Material,1997,6:802−806 doi: 10.1016/S0925-9635(96)00762-5
[30] Zhang S. Sun D, Fu Y, Du H. Thoug hening of hard nano- structural thin films: a critical review[J]. Surface Coatings Technology,2005,198(1/2/3):2−8
[31] Deng Shoujun,Sun neiming,Zhang yongzheng,et al. Evolution and present situation of wear mechanism[J]. Mechanical research and application,2004(6):10−11+15 (邓守军,孙乐民,张永振,等. 磨损机理的变迁与现状[J]. 机械研究与应用,2004(6):10−11+15(in chinese) doi: 10.3969/j.issn.1007-4414.2004.06.003 Deng Shoujun, Sun neiming, Zhang yongzheng, et al. Evolution and present situation of wear mechanism[J]. Mechanical research and application, 2004(6):10-11+15DOI: 10.3969/j.issn.1007-4414.2004.06.003
[32] Lu X C. Li M, Tang X M, et al. Micromechanical properties of hydrogenated diamond-like carbon multilayers[J]. Surface & Coatings Technology,2006,201:1679−1684