[1] Saito K,Sato Y,Inayoshi S,et al. Measurement system for low outgassing materials by switching between two pumping paths[J]. Vacuum,1996,47:749−7524 doi: 10.1016/0042-207X(96)00149-2
[2] Schindler N,Schleuβner D,Edelmann C. Measurements of partial outgassing rates[J]. Vacuum,1996,47(4):351−355 doi: 10.1016/0042-207X(95)00250-2
[3] ISHIZAWA K, KURISU H, YAMAMOTO S, et al. Titanium Materials for UHV/XHV Systems[C]. Discharges & Electrical Insulation in Vacuum, 2006 XXII International Symposium on;Matsue, Japan. 2006: 805-808
[4] Yoshimura N A. Differential pressure-rise method for measuring the net outgassing rates of a solid material and for estimating its characteristic values as a gas source[J]. Journal of Vacuum Science & Technology A:Vacuum, Surfaces, and Films,1985,3(6):2177−2183
[5] Santillan J J,Toriumi M,Itani T. A study of EUV resist outgassing characteristics using a novel outgas analysis system[J]. Advances in Resist Materials and Processing Technology XXIV. SPIE,2007,6519:1218−1224
[6] Yang Y,Saitoh K,Tsukahara S. An improved throughput method for the measurement of outgassing rates of materials[J]. Vacuum,1995,46(12):1371−1376 doi: 10.1016/0042-207X(95)00154-9
[7] Kurisu H,Ishizawa K,Yamamoto S,et al. Application of titanium materials to vacuum chambers and components[J]. Journal of Physics:Conference Series. IOP Publishing,2008,100(9):092002 doi: 10.1088/1742-6596/100/9/092002
[8] Redhead,P. A. Effects of readsorption on outgassing rate measurements[J]. Journal of Vacuum Science & Technology A: Vacuum, Surfaces and Films,1996,14(4):2599−2609
[9] Holtrop K LHansink M J. High temperature outgassing tests on materials used in the DIII-D tokamak[J]. Journal of Vacuum Science & Technology A:Vacuum, Surfaces and Films,2006,24(4):1572−1577
[10] Takeda, Masatoshi, et al. Hydrogen outgassing mechanism in titanium materials. Applied Surface Science 2011, 258 (4): 1405-1411
[11] Hong S S, Wakil Khan, Kang S W. Investigation of a set procedure for the stability of pressure control in the newly developed flow-control system at KRISS. Mapan. 2009, 24 (2): 89-94
[12] Chu H M, Sasaki T, Hane K. Design, fabrication, and vacuum package process for high performance of 2D scanning MEMS micromirror, solid-state sensors, Actuators and Microsystems Conference, 16th International. IEEE, 2011: 558-561
[13] Yoshimura N,Hirano H,Ohara K,et al. Outgassing characteristics of an electropolished stainless-steel pipe with an operating extractor ionization gauge[J]. Journal of Vacuum Science & Technology A:Vacuum, Surfaces, and Films,1991,9(4):2315−2318
[14] Aiello G,Meier A,Scherer T,et al. Outgassing measurements for the ITER EC H&CD upper launcher[J]. Fusion engineering and design,2011,86(9-11):2474−2477 doi: 10.1016/j.fusengdes.2011.01.128
[15] Sinharoy S,Lange W J,Freidhoff C B. Outgassing properties of a commercial fiber fabric material for high temperature use in high vacuum[J]. Journal of Vacuum Science & Technology A:Vacuum, Surfaces, and Films,1990,8(2):930−932
[16] He P,Hseuh H C,Mapes M,et al. Outgassing properties of the spallation neutron source ring vacuum chambers coated with titanium nitride[J]. Journal of Vacuum Science & Technology A:Vacuum, Surfaces, and Films,2004,22(3):705−710
[17] Holtrop K L,Hansink M,Kellman A G. Outgassing tests on materials used in the DIII–D magnetic fusion tokamak[J]. Journal of Vacuum Science & Technology A:Vacuum, Surfaces, and Films,1999,17(4):2064−2068
[18] Redhead P A. Recommended practices for measuring and reporting outgassing data[J]. Journal of Vacuum Science & Technology A:Vacuum, Surfaces, and Films,2002,20(5):1667−1675
[19] Moraw M,H. Prasoł[J]. The influence of readsorption on the measurement of outgassing kinetics of metals. Vacuum,1998,49(4):353−358
[20] 卢耀文,吴端,陈春,等. 一种(10-1~10-10)Pam3/s标准气体流量计的设计[J]. 真空科学与技术学报,2020,40(07):674−678
[21] Jousten K,Messer G,Wandrey D. A precision gas flowmeter for vacuum metrology[J]. Vacuum,1993,44(2):135−141 doi: 10.1016/0042-207X(93)90362-E
[22] Li Detian,Cheng Yongjun,Feng Yan,et al. Very low gas flow measurements for UHV/XHV and leak calibration[J]. Metrologia,2013,50:15−19 doi: 10.1088/0026-1394/50/1/15
[23] Calcatelli A,Raiteri G,Rumiano G. The IMGC-CNR flowmeter for automatic measurements of low-range gas flows[J]. Measurement,2003,34:121−132 doi: 10.1016/S0263-2241(03)00029-0
[24] Levinea P D,Sweda J R. Precision gas flowmeter for vacuum calibration[J]. Journal of Vacuum Science & Technology A:Vacuum, Surfaces, and Films,1996,15(3):747−752
[25] 卢耀文,董云宁,杨传森,等. 一种(10−5~10−16) Pam3/s标准气体流量计的设计[J]. 真空科学与技术学报,2021,41(05):420−424
[26] 冯焱,成永军,赵定众,等. 恒压式气体微流量计的性能测试[J]. 真空科学与技术学报,2005(03):217−221
[27] 张涤新,李得天,冯焱,等. 动态流导法真空校准装置[J]. 真空,2005(03):30−34 doi: 10.3969/j.issn.1002-0322.2005.03.008
[28] 卢耀文,吴端,王欢,等. 一种(105~10−8) Pa真空计校准装置的设计[J]. 真空科学与技术学报,2021,41(01):29−34
[29] Park C D. Reduction in hydrogen outgassing from stainless steels by a medium-temperature heat treatment[J]. Journal of Vacuum Science & Technology A:Vacuum, Surfaces, and Films,2008,26,(5):1166−1171