[1] Fan Q X,Wang X,Wang Z Q,et al. Cutting properties of TiCN coated carbide cutter in milling[J]. Tool Engineering,2020,54(04):20−23 (范其香,王欣,王政权,等. TiCN涂层硬质合金刀具铣削性能研究[J]. 工具技术,2020,54(04):20−23(in chinese) Fan Q X, Wang X, Wang Z Q, et al. Cutting properties of TiCN coated carbide cutter in milling[J]. Tool Engineering, 2020, 54 (04): 20-23
[2] Liu L,Shi Q,Dai M J,et al. Effects of pulsed bias on microstructure of TiCN films by arc ion plating[J]. Surface Technology,2018,47(09):199−205 (刘恋,石倩,代明江,等. 脉冲偏压对电弧离子镀TiCN薄膜组织结构的影响[J]. 表面技术,2018,47(09):199−205(in chinese) Liu L, Shi Q, Dai M J, et al. Effects of pulsed bias on microstructure of TiCN films by arc ion plating[J]. Surface Technology, 2018, 47 (09): 199-205
[3] Shafyei H,Ashiri R. Electron beam assisted physical vapor deposition of very hard TiCN coating with nanoscale characters[J]. Ceramics International,2019,45(12):14821−14828 doi: 10.1016/j.ceramint.2019.04.213
[4] Zhang Y M,Zhu L H,Ban Z G,et al. Effect of oxygen addition on microstructure and properties of TiCN coating deposited by chemical vapor deposition[J]. Cemented Carbide,2012,29(02):66−71 (张雨萌,朱丽慧,班志刚,等. 氧的掺入对化学气相沉积TiCN涂层的影响[J]. 硬质合金,2012,29(02):66−71(in chinese) Zhang Y M, Zhu L H, Ban Z G, et al. Effect of oxygen addition on microstructure and properties of TiCN coating deposited by chemical vapor deposition[J]. Cemented Carbide, 2012, 29 (02): 66-71
[5] Sahoo S P,Datta S. Dry machining performance of AA7075-T6 alloy using uncoated carbide and MT-CVD TiCN-Al2O3 coated carbide inserts[J]. Arabian Journal for Science and Engineering,2020,45(11):9777−9791 doi: 10.1007/s13369-020-04947-z
[6] Du L Y,Qiu L C,Du Y,et al. Influences of different post-treatments on microstructure and cutting performance of MT-TiCN coated cutting tool[J]. Journal of Netshape Forming Engineering,2017,9(03):83−88 (杜丽业,邱联昌,杜勇,等. 不同后处理对MT-TiCN涂层刀具组织与切削性能的影响[J]. 精密成形工程,2017,9(03):83−88(in chinese) doi: 10.3969/j.issn.1674-6457.2017.03.016 Du L Y, Qiu L C, Du Y, et al. Influences of different post-treatments on microstructure and cutting performance of MT-TiCN coated cutting tool[J]. Journal of Netshape Forming Engineering, 2017, 9 (03): 83-88 doi: 10.3969/j.issn.1674-6457.2017.03.016
[7] Liu C Y,Liu Z Q,Wang B. Modification of surface morphology to enhance tribological properties for CVD coated cutting tools through wet micro-blasting post-process[J]. Ceramics International,2017,44:3430−3439
[8] Matsue T,Nishida M,Takao H. Change in residual stress of TiN coating material during heat treatment in an air atmosphere[J]. Advanced Materials Research,2015,1110:125−129 doi: 10.4028/www.scientific.net/AMR.1110.125
[9] Liu W J,Duan J H,Zhao H C,et al. Effect of cryogenic treatment time on microstructure and tribology performance of TiAlN coating[J]. Surface Topography:Metrology and Properties,2021,9:035055 doi: 10.1088/2051-672X/ac2882
[10] Guan Q F,Zhang Q Y,Dong C. Physical model of stress and deformation microstructures in AISI 304L austenitic stainless steel induced by high-current pulsed electron beam surface irradiation[J]. ISIJ International,2008,48(02):235−239 doi: 10.2355/isijinternational.48.235
[11] Su Y C,Li G Y,Niu L Y,et al. Microstructure modifications and associated corrosion improvements in GH4169 superalloy treated by high current pulsed electron beam[J]. Journal of Nanomaterials,2015,2015:252
[12] Koval’ NN,Ivanov Y F. Nanostructuring of surfaces of metalloceramic and ceramic materials by electron-beams[J]. Russian Physics Journal,2008,51(05):505−516 doi: 10.1007/s11182-008-9073-7
[13] Perry A,Matossian J,Bull S,et al. The effect of rapid thermal processing (RTP) on TiN coatings deposited by PVD and the steel-turning performance of coated cemented carbide[J]. Surface and Coatings Technology,1999,120-121:337−342 doi: 10.1016/S0257-8972(99)00385-0
[14] Jiang W,Wang L P,Wang X F. Studies on surface topography and mechanical properties of TiN coating irradiated by high current pulsed electron beam[J]. Nuclear Instruments and Methods in Physics Research Section B:Beam Interactions with Materials and Atoms,2018,436:63−67
[15] Lou C S,Lu X,Jin G,et al. Influences of high current pulsed electron beam treatment on microstructure and performance of TiAlN coated cutting tools[J]. Journal of Materials Engineering,2014(08):15−20 (娄长胜,芦馨,金光,等. 强流脉冲电子束表面处理对TiAlN涂层刀具的组织结构及性能的影响[J]. 材料工程,2014(08):15−20(in chinese) doi: 10.11868/j.issn.1001-4381.2014.08.003 Lou C S, Lu X, Jin G, et al. Influences of high current pulsed electron beam treatment on microstructure and performance of TiAlN coated cutting tools[J]. Journal of Materials Engineering, 2014 (08): 15-20 doi: 10.11868/j.issn.1001-4381.2014.08.003
[16] Lu X,Jin G,Gao J L,et al. Microstructure and microhardness of TiAlN coatings with different energy densities of high current pulsed electron beam[J]. Chinese Journal of Rare Metals,2016,40(5):453−459 (芦馨,金光,高景龙,等. 强流脉冲电子束能量密度对TiAlN涂层微观组织和硬度的影响[J]. 稀有金属,2016,40(5):453−459(in chinese) Lu X, Jin G, Gao J L, et al. Microstructure and microhardness of TiAlN coatings with different energy densities of high current pulsed electron beam[J]. Chinese Journal of Rare Metals, 2016, 40 (5): 453-459
[17] Cai J,Ji L,Yang S Z,et al. Surface microstructure and stress characteristics in pure zirconium after high current pulsed electron beam irradiation[J]. Acta Physica Sinica,2013,62(15):336−346 (蔡杰,季乐,杨盛志,等. 强流脉冲电子束作用下金属锆的微观结构与应力状态[J]. 物理学报,2013,62(15):336−346(in chinese) Cai J, Ji L, Yang S Z, et al. Surface microstructure and stress characteristics in pure zirconium after high current pulsed electron beam irradiation[J]. Acta Physica Sinica, 2013, 62 (15): 336-346
[18] Gao B,Gao C,He J D,et al. Microstructure variation and properties of pure titanium induced by high-current pulsed electron beam[J]. Surface Technology,2017,46(07):156−160 (高波,高超,何吉东,等. 强流脉冲电子束作用下纯钛的微观组织结构变化及其性能研究[J]. 表面技术,2017,46(07):156−160(in chinese) Gao B, Gao C, He J D, et al. Microstructure variation and properties of pure titanium induced by high-current pulsed electron beam[J]. Surface Technology, 2017, 46 (07): 156-160
[19] Chen Y N,Lv P,Zhang S Y,et al. Microstructure modification and corrosion resistance of CrFeCoNiMo0.2 high entropy alloy induced by high-current pulsed electron beam[J]. Surface Technology,2020,49(10):214−223 (陈亚楠,吕鹏,张舒窈,等. 强流脉冲电子束作用下CrFeCoNiMo0.2高熵合金微观结构变化与耐蚀性能研究[J]. 表面技术,2020,49(10):214−223(in chinese) Chen Y N, Lv P, Zhang S Y, et al. Microstructure modification and corrosion resistance of CrFeCoNiMo0.2 high entropy alloy induced by high-current pulsed electron beam[J]. Surface Technology, 2020, 49 (10): 214-223
[20] Zhang T C,Zhang K M,Song L X,et al. Effect of high current pulsed electron beam treatment on surface microstructure and properties of GW103K magnesium alloy[J]. Materials for Mechanical Engineering,2020,44(02):43−48 (张天成,张可敏,宋鲁霞,等. 强流脉冲电子束处理对GW103K镁合金表面微观结构和性能的影响[J]. 机械工程材料,2020,44(02):43−48(in chinese) Zhang T C, Zhang K M, Song L X, et al. Effect of high current pulsed electron beam treatment on surface microstructure and properties of GW103K magnesium alloy[J]. Materials for Mechanical Engineering, 2020, 44 (02): 43-48
[21] Zhang C L,Lv P,Cai J,et al. Enhanced corrosion property of W-Al coatings fabricated on aluminum using surface alloying under high-current pulsed electron beam[J]. Journal of Alloys and Compounds,2017,723:258−265 doi: 10.1016/j.jallcom.2017.06.189
[22] Leyland A,Matthews A. On the significance of the H/E ratio in wear control: a nanocomposite coating approach to optimised tribological behaviour[J]. Wear,2000,246(1-2):1−11 doi: 10.1016/S0043-1648(00)00488-9
[23] Wu J,Guan Q F,Cai J,et al. Microstructure and thermal cycling behavior of the surface-modified thermal barrier coatings by high-current pulsed electron beam[J]. Materials Review,2018,32(07):2202−2207 (吴健,关庆丰,蔡杰,等. 脉冲电子束作用下热障涂层微观结构及热循环性能[J]. 材料导报,2018,32(07):2202−2207(in chinese) doi: 10.11896/j.issn.1005-023X.2018.13.010 Wu J, Guan Q F, Cai J, et al. Microstructure and thermal cycling behavior of the surface-modified thermal barrier coatings by high-current pulsed electron beam[J]. Materials Review, 2018, 32 (07): 2202-2207 doi: 10.11896/j.issn.1005-023X.2018.13.010