[1] Xia Xutian,Li Zhen,Liang Yufang,et al. "New infrastructure "has three aspects and seven fields[J]. Enterprise Observer,2020(104):40−43 (夏旭田,李振,梁宇芳,等. “新基建”的三大方面、七大领域[J]. 企业观察家,2020(104):40−43(in chinese) Xia Xutian, Li Zhen, Liang Yufang, et al. "New infrastructure "has three aspects and seven fields[J]. Enterprise Observer, 2020, No. 104(05): 40-43 (in chinese)
[2] Lam Research. The development history, current challenges and countermeasures of semiconductor memory[J]. China Integrated Circuits,2021,30(10):15−17 (泛林集团. 半导体存储器的发展历程与当前挑战及其对策[J]. 中国集成电路,2021,30(10):15−17(in chinese) doi: 10.3969/j.issn.1681-5289.2021.10.003 Lam Research. The development history, current challenges and countermeasures of semiconductor memory[J]. China Integrated Circuits, 2021, 30(10): 15-17 (in chinese) doi: 10.3969/j.issn.1681-5289.2021.10.003
[3] Xiu Shudong,Ni Zhongjin,Chen Maojun. Research progress of chemical mechanical polishing[J]. Mechanical research and application,2008,21(06):10−13 (修树东,倪忠进,陈茂军. 化学机械抛光的研究进展[J]. 机械研究与应用,2008,21(06):10−13(in chinese) doi: 10.3969/j.issn.1007-4414.2008.06.005 Xiu Shudong, Ni Zhongjin, Chen Maojun. Research progress of chemical mechanical polishing[J]. Mechanical research and application, 2008, 21(06): 10-13 (in chinese) doi: 10.3969/j.issn.1007-4414.2008.06.005
[4] Liu Ming. Semiconductor memory technology[J]. Technology Bulletin,2019,37(03):62−65 (刘明. 半导体存储器技术[J]. 科技导报,2019,37(03):62−65(in chinese) Liu Ming. Semiconductor memory technology[J]. Technology Bulletin, 2019, 37(03): 62-65 (in chinese)
[5] Huang Jiaoying,Wang Lequn,Gao Cheng. Review of single event effect test of Flash memory[J]. Application of electronic technology,2020,46(07):44−48+52 (黄姣英,王乐群,高成. Flash存储器单粒子效应测试研究综述[J]. 电子技术应用,2020,46(07):44−48+52(in chinese) Huang Jiaoying, Wang Lequn, Gao Cheng. Review of single event effect test of Flash memory[J]. Application of electronic technology, 2020, 46(07): 44-48+52
[6] Goda Akira. Recent progress on 3D NAND flash technologies[J]. Electronics,2021,10(24)
[7] Sicong Wang,Jian Mi,Abhishek Vikram,et al. Novel pattern-centric solution for XtackingTM AFM metrology[J]. Journal of Microelectronic Manufacturing,2019,2(3)
[8] 石强, 李儒兴, 李协吉. APC在Direct STI CMP中的应用研究[J]. 集成电路应用, 2021, 38(05): 29-31. Application of APC in Direct STI CMP[J]. Integrated circuit application, 2021, 38(05): 29-31
[9] Zhan Yang,Zhou Guoan,Wang Donghui,et al. CMP process analysis of interlayer dielectric (ILD)[J]. Electronic industry special equipment,2016,45(06):40−44 (詹阳,周国安,王东辉,等. 层间介质(ILD)CMP工艺分析[J]. 电子工业专用设备,2016,45(06):40−44(in chinese) doi: 10.3969/j.issn.1004-4507.2016.06.010 Zhan Yang, Zhou Guoan, Wang Donghui, et al. CMP process analysis of interlayer dielectric (ILD)[J]. Electronic industry special equipment, 2016, 45(06): 40-44 (in chinese) doi: 10.3969/j.issn.1004-4507.2016.06.010
[10] Lee H,Lee D,Jeong H. Mechanical aspects of the chemical mechanical polishing process: a review[J]. International journal of precision engineering and manufacturing,2016,17:525−536 doi: 10.1007/s12541-016-0066-0
[11] Jia Yingxi,Niu Xinhuan,Wang Xianbin. Chemical interaction between components of alkaline slurry in tungsten CMP and its influence[J]. Micro-nano electronic technology,2015,52(05):334−338 (贾英茜,牛新环,王现彬. 钨CMP中碱性抛光液组分间化学作用及其影响[J]. 微纳电子技术,2015,52(05):334−338(in chinese) doi: 10.13250/j.cnki.wndz.2015.05.012 Jia Yingxi, Niu Xinhuan, Wang Xianbin. Chemical interaction between components of alkaline slurry in tungsten CMP and its influence[J]. Micro-nano electronic technology, 2015, 52(05): 334-338 (in chinese) doi: 10.13250/j.cnki.wndz.2015.05.012
[12] Jia Yingxi,Niu Xinhuan,waist red. Electrochemical behavior of oxidant in alkaline slurry for copper CMP[J]. Microelectronics,2017,47(04):586−589+592 (贾英茜,牛新环,腰彩红. 铜CMP碱性抛光液中氧化剂的电化学行为研究[J]. 微电子学,2017,47(04):586−589+592(in chinese) Jia Yingxi, Niu Xinhuan, waist red. Electrochemical behavior of oxidant in alkaline slurry for copper CMP[J]. Microelectronics, 2017, 47(04): 586-589 + 592
[13] Zhang Z,Liao L,Wang X,et al. Development of a novel chemical mechanical polishing slurry and its polishing mechanisms on a nickel alloy[J]. Applied Surface Science,2020,506:144670 doi: 10.1016/j.apsusc.2019.144670
[14] Lee H,Kim H,Jeong H. Approaches to sustainability in chemical mechanical polishing (CMP): a review[J]. International Journal of Precision Engineering and Manufacturing-Green Technology,2022:1−19
[15] Tan C,Zhang W,Huang O,et al. Application of real-time Cu thickness profile control in Cu CMP[J]. ECS Transactions,2012,44(1):553 doi: 10.1149/1.3694368