[1] Wagner S. Amorphous silicon: Vehicle and test bed for large‐area electronics[J]. Physica Status Solidi,2010,207(3):501−509 doi: 10.1002/pssa.200982910
[2] Li Z,Zhang X,Han G. Electrical and optical properties of boron‐doped nanocrystalline silicon films deposited by PECVD[J]. physica status solidi (a),2010,207:144−148 doi: 10.1002/pssa.200925107
[3] Strum A, Fenigstein A. Complementary metal-oxide-semiconductor (CMOS) X-ray sensors[J]. High Perform. Silicon Imaging, 2020: 413-436
[4] Ramanujam J,Bishop D M,Todorov T K,et al. Flexible CIGS, CdTe and a-Si: H based thin film solar cells: A review[J]. Prog Mater Sci,2019,110:100619
[5] Cianci E,Coppa A,Foglietti V,et al. Fabrication of RF-MEMS switches on LTCC substrates using PECVD a-Si as sacrificial layer[J]. Microelectron Eng,2007,84(5-8):1401−1404 doi: 10.1016/j.mee.2007.01.096
[6] Chen C W,Chang T C,Liu P T,et al. High-performance hydrogenated amorphous-Si TFT for AMLCD and AMOLED applications[J]. IEEE Electron Device Lett,2005,26(10):731−733 doi: 10.1109/LED.2005.855405
[7] Lee S,Kim S. Optical absorption characteristic in thin a-Si film embedded between an ultrathin metal grating and a metal reflector[J]. IEEE Photonics J,2013,5(5):4800610 doi: 10.1109/JPHOT.2013.2280339
[8] Takagi T,Takechi K,Nakagawa Y,et al. High rate deposition of a-Si: H and a-SiNx: H by VHF PECVD[J]. Vacuum,1998,51(4):751−755 doi: 10.1016/S0042-207X(98)00284-X
[9] Triendl F,Pfusterschmied G,Fleckl G,et al. On the crystallization behavior of sputter-deposited a-Si films on 4H-SiC[J]. Thin Solid Films,2020,697:137837 doi: 10.1016/j.tsf.2020.137837
[10] Sontheimer T, Becker C, Ruske F, et al. Challenges and opportunities of electron beam evaporation in the preparation of poly-Si thin film solar cells[C]. 2010 35th IEEE Photovoltaic Specialists Conference, 2010: 000614−000619
[11] Chen K C,Ming Q T,Po H T,et al. Fabrication and characterization of amorphous Si films by PECVD for MEMS[J]. J Micromech Microeng,2004,15(1):136
[12] Castro F G,Sagazan O D,Coulon N,et al. ICP-CVD μ-Si layers optimization for strain gauges on flexible substrates[J]. Sens and Actuators A,2020,315:112261 doi: 10.1016/j.sna.2020.112261
[13] Brookshire K L, Martyniuk M, Silva K, et al. Long-term stability of ICPCVD a-Si under prolonged heat treatment[C]. 2014 Conference on Optoelectronic and Microelectronic Materials & Devices. IEEE, 2014: 160-163
[14] Han S M,Lee M C,Shin M Y,et al. Poly-Si TFT fabricated at 150 deg C using ICP-CVD and excimer laser annealing[J]. Proc IEEE,2005,93(7):1297−1305 doi: 10.1109/JPROC.2005.851535
[15] Tripathi D K,Jiang F,Martyniuk M,et al. Optimization of ICPCVD amorphous silicon for optical MEMS applications[J]. J Microelectromech Syst,2015,24(6):1998−2007 doi: 10.1109/JMEMS.2015.2459066
[16] Doris K T N,Wang Q,Wang T,et al. Exploring high refractive index silicon-rich nitride films by low-temperature inductively coupled plasma chemical vapor deposition and applications for integrated waveguides[J]. ACS Appl Mater Interfaces,2015,7(39):21884−21889 doi: 10.1021/acsami.5b06329
[17] Dalal V,Graves J,Leib J. Influence of pressure and ion bombardment on the growth and properties of nanocrystalline silicon materials[J]. Appl Phys Lett,2004,85(8):1413−1414 doi: 10.1063/1.1784550
[18] Qin Y,Yan H,Li F,et al. The optoelectronic properties of silicon films deposited by inductively coupled plasma CVD[J]. Appl Surf Sci,2010,257(3):817−822 doi: 10.1016/j.apsusc.2010.07.071