[1] 李得天. 真空计量的新进展[J]. 上海计量测试,2003(05):4−10(in chinese) doi: 10.3969/j.issn.1673-2235.2003.05.001 Li D T. Recent advances in vacuum metrology[J]. Shanghai Metrology and Testing,2003(05):4−10 doi: 10.3969/j.issn.1673-2235.2003.05.001
[2] 达道安. 真空设计手册[M]. 北京: 国防工业出版社. 2004, 1311-1314; 98-132(in chinese) Da D A. Vacuum design handbook[M]. Beijing: National Defense Industry Press, 2004, 1311-1314; 98-132
[3] 卢耀文, 陈旭, 李得天, 等. 便携式真空漏孔校准装置[J]. 真空科学与技术学报,2013,33(12):1179−1183(in chinese) doi: 10.3969/j.issn.1672-7126.2013.12.03 Lu Y W, Chen X, Li D T, et al. Portable vacuum leak hole calibration device[J]. Journal of Vacuum Science and Technology,2013,33(12):1179−1183 doi: 10.3969/j.issn.1672-7126.2013.12.03
[4] 刘赐贤, 张涤新, 冯焱, 等. 金属压扁型正压漏孔不同压力下的漏率研究[J]. 真空与低温,2011,17(04):218−223(in chinese) doi: 10.3969/j.issn.1006-7086.2011.04.007 Liu C X, Zhang D X, Feng Y, et al. Study on the leakage rate of metal flattened positive pressure leak hole at different pressures[J]. Vacuum and Low Temperature,2011,17(04):218−223 doi: 10.3969/j.issn.1006-7086.2011.04.007
[5] 崔尧尧, 刘红光, 孙搏, 等. 通道式标准漏孔测量结果不确定度评定[J]. 工业计量,2018,28(3):76−78(in chinese) Cui X X, Liu H G, Sun B, et al. Uncertainty evaluation of channel type standard leak hole measurement results[J]. Industrial Metrology,2018,28(3):76−78
[6] 钟博扬, 王维, 李芳芳, 等. 不同气体和压力对真空漏孔漏率的影响[J]. 真空科学与技术学报,2017,37(4):345−350(in chinese) doi: 10.13922/j.cnki.cjovst.2017.04.01 Zhong B Y, Wang W, Li F F, et al. Influence of different gases and pressures on the leakage rate of vacuum leak holes[J]. Journal of Vacuum Science and Technology,2017,37(4):345−350 doi: 10.13922/j.cnki.cjovst.2017.04.01
[7] 刘燚, 刘贝贝, 周宇仁, 等. 基于不同气体和压力下通道型正压标准漏孔漏率的分析[J]. 上海计量测试,2022,49(01):31−33(in chinese) Liu Y, Liu B B, Zhou Y R, et al. Analysis of leakage rate of channel-type positive pressure standard leak holes under different gases and pressures[J]. Shanghai Metrology and Testing,2022,49(01):31−33
[8] 闫治平, 黄淑英. 漏率与压力关系的研究[J]. 中国空间科学技术,1999(02):44−48(in chinese) Yan Z P, Huang S Y. Study on the relationship between leakage rate and pressure[J]. Chinese Journal of Space Science and Technology,1999(02):44−48
[9] 许艳芝, 朱惠人, 郑杰. 克努森数在微尺度相似流动特性研究中的作用[J]. 航空动力学报,2013,28(08):1752−1758(in chinese) Xu Y Z, Zhu H R, Zheng J. The role of Knudsen number in the study of microscale similar flow characteristics[J]. Journal of Aerodynamics,2013,28(08):1752−1758
[10] Narayanan S, Fedorov A G, et al. Heat and mass transfer during evaporation of thin liquid films confined by nanoporous membranes subjected to air jet impingement, International Journal of Heat and Mass Transfer, 58(2013)300-311
[11] Liu Y, Chen W, Thermal analysis in the evaporation of flowing thin liquid film confined by gradient or double-layered porous layer subjected to air jet impingement, International Journal of Thermal Sciences, 2022(179) : 1290-0729
[12] 张书令, 许红, 洪扁, 等. 正压标准漏孔校准装置[J]. 中国测试,2015,41(S1):6−9(in chinese) Zhang S L, Xu H, Hong B, et al. Calibration device for positive pressure standard leak holes[J]. China Measurement and Testing,2015,41(S1):6−9