| [1] | 侯长勇. 钢领与钢丝圈的应用及发展[J]. 纺织器材,2022,49(S1):25−28(in chinese) Hou C Y. Application and development of steel collar and wire ring[J]. Textile Equipment,2022,49(S1):25−28 |
| [2] | 陈伟, 陈标. 细纱高速纺纱选用钢领、钢丝圈的探讨[J]. 现代纺织技术,2016,24(02):37−39(in chinese) Chen W, Chen B. Discussion on selection of steel collar and steel wire ring for high speed spinning of fine yarn[J]. Modern Textile Technology,2016,24(02):37−39 |
| [3] | Heng T, Yongqiang T, Yanpin W, et al. Effects of gradient structure and modulation period of Ta/TaN/Ta(C, N)/Ta-DLC multilayer coatings prepared by HiPIMS[J]. Surface and Coatings Technology,2023,459:129406 doi: 10.1016/j.surfcoat.2023.129406 |
| [4] | 杨焜, 宋进兵, 林松盛, 等. 超音速火焰喷涂碳化钨与磁控溅射掺钨类金刚石膜复合涂层结构及性能[J]. 表面技术, 2022, 51(06):399−406+415 (in chinese) Yang K, Song J B, Lin S S, et al. Structure and properties of supersonic flame spraying tungsten carbide and magnetron sputtering tungsten-doped diamond-like film composite coating[J]. Surface Technology, 2019, 51(06):399−406+415 |
| [5] | 贾东旭, 刘星, 孙刚, 等. 衬底加热温度对WC-DLC涂层结构和摩擦磨损性能的影响[J]. 真空科学与技术学报, 2022, 42(05):364−370(in chinese) jia d x, liu x, sun g, et al. effect of substrate heating temperature on structure and friction and wear properties of WC-DLC coating[J]. Journal of Vacuum Science and Technology, 202, 42(05):364−370 |
| [6] | Mabuchi Y, Higuchi T, Weihnacht V. Effect of sp2/sp3 bonding ratio and nitrogen content on friction properties of hydrogen-free DLC coatings[J]. Tribology international,2013,62:130−140 doi: 10.1016/j.triboint.2013.02.007 |
| [7] | Dai W, Wang A. Synthesis, characterization and properties of the DLC films with low Cr concentration doping by a hybrid linear ion beam system[J]. Surface and Coatings Technology,2011,205(8-9):2882−2886 doi: 10.1016/j.surfcoat.2010.10.057 |
| [8] | 邹庆化, 杨兵, 吴瑜, 等. DLC镀膜钢领磨损原因与镀膜工艺改进[J]. 纺织器材,2010,37(03):1−6(in chinese) doi: 10.3969/j.issn.1001-9634.2010.03.001 Zou Q H, Yang B, Wu Y, et al. The wear and tear of the filmed ring DLC and the modification of the filming process[J]. Textile Accessories,2010,37(03):1−6 doi: 10.3969/j.issn.1001-9634.2010.03.001 |
| [9] | 赵帅, 毕雅萱, 许新军. GCr15钢领基体磁控溅射类金刚石薄膜的工艺[J]. 材料保护,2015,48(10):23−25+7(in chinese) Zhao S, Bi Y X, Xu X J, et al. Study of diamond-like carbon film prepared by magnetron sputtering on surface of GCr15 ring[J]. Materials Protection,2015,48(10):23−25+7 |
| [10] | 许浩杰, 陈仁德, 周广学, 叶羽敏, 汪爱英. 工作气压对管内壁沉积Si/O-DLC薄膜结构与性能的影响[J]. 表面技术:1−13 (in chinese) Xu H J, Chen R D, Zhou G X, et al. Effect of working pressure on structure and properties of Si/O-DLC films deposited on inner wall of tubes[J]. Surface technology:1−13 |
| [11] | Shu K, Zhang C, Hou P, et al. Crack evolution in diamond-like carbon films on steel substrates during nano-indentation[J]. Diamond and Related Materials,2020,106:107829 doi: 10.1016/j.diamond.2020.107829 |
| [12] | Bi J, Tian XL, Gao Y, et al. Effect of deep cooling times on the architecture and performance of DLC coating system[J]. Journal of Physics:Conference Series,2022,2390(1):012020 doi: 10.1088/1742-6596/2390/1/012020 |
| [13] | 杨利, 张桐, 陈东旭等. 化学气相沉积温度对AZ31镁合金表面制备DLC薄膜微观结构及机械性能的影响[J]. 表面技术, 2020, 49(05):317-324(in chinese) Yang L, Zhang T, Chen D X, et al. Effect of chemical vapor deposition Temperature on microstructure and mechanical properties of DLC films prepared on AZ31 magnesium alloy surface[J]. Surface Technology, 2019, 49(05):317-324 |
| [14] | ZOU C W, WANG H J, FENG L, et al. Effects of Cr concentrations on the microstructure, hardness, and temperature-dependent tribological properties of Cr-DLC coatings[J]. Applied Surface Science,2013,286:137−141 doi: 10.1016/j.apsusc.2013.09.036 |
| [15] | Beake B D, McMaster S J, Liskiewicz T W, et al. Influence of Si-and W-doping on micro-scale reciprocating wear and impact performance of DLC coatings on hardened steel[J]. Tribology International,2021,160:107063 doi: 10.1016/j.triboint.2021.107063 |
| [16] | 郭飞飞, 胥光申, 任明基, 等. 类金刚石膜对CoCrMo合金摩擦性能的影响[J]. 表面技术, 2020, 49(02):172-177(in chinese) Guo F F, Xu G S, Ren M J, et al. Effect of diamond-like film on friction properties of CoCrMo alloy[J]. Surface Technology, 2019, 49(02):172-177 |
| [17] | Li C, Huang L, Yuan J. Effect of sp3 content on adhesion and tribological properties of non-hydrogenated DLC films[J]. Materials,2020,13(8):1911 doi: 10.3390/ma13081911 |
| [18] | Xinrong Li, Zhaoning Bu, Weiwei Chang, et al. Optimization of dynamic model of ring-spinning yarn balloon based on genetic-algorithm parameter identification[J]. The Journal of The Textile Institute,2019(4):1−7 |