[1] RKHALAF M, SUNESARA A, ASHRAFI B, et al. Toughness by segmentation: fabrication, testing and micromechanics of architectured ceramic panels for impact applications [J]. International Journal of Solids and Structures, 2019, 158: 52–65. doi: 10.1016/j.ijsolstr.2018.08.025
[2] LIU P, ZHU D J, YAO Y M, et al. Numerical simulation of ballistic impact behavior of bio-inspired scale-like protection system [J]. Materials & Design, 2016, 99: 201–210. doi: 10.1016/j.matdes.2016.03.040
[3] DIMAS L S, BRATZEL G H, EYLON I, et al. Tough composites inspired by mineralized natural materials: computation, 3D printing, and testing [J]. Advanced Functional Materials, 2013, 23(36): 4629–4638. doi: 10.1002/adfm.201300215
[4] GRUNENFELDER L K, SUKSANGPANYA N, SALINAS C, et al. Bio-inspired impact-resistant composites [J]. Acta Biomaterialia, 2014, 10(9): 3997–4008. doi: 10.1016/j.actbio.2014.03.022
[5] GU G X, TAKAFFOLI M, HSIEH A J, et al. Biomimetic additive manufactured polymer composites for improved impact resistance [J]. Extreme Mechanics Letters, 2016, 9: 317–323. doi: 10.1016/j.eml.2016.09.006
[6] BARTHELAT F. Nacre from mollusk shells: a model for high-performance structural materials [J]. Bioinspiration & Biomimetics, 2010, 5(3): 035001. doi: 10.1088/1748-3182/5/3/035001
[7] CORNI I, HARVEY T J, WHARTON J A, et al. A review of experimental techniques to produce a nacre-like structure [J]. Bioinspiration & Biomimetics, 2012, 7(3): 031001. doi: 10.1088/1748-3182/7/3/031001
[8] 赵赫威, 郭林. 仿贝壳珍珠母层状复合材料的制备及应用 [J]. 科学通报, 2017, 62(6): 576–589. doi: 10.1360/N972016-00754 ZHAO H W, GUO L. Synthesis and applications of layered structural composites inspired by nacre [J]. Chinese Science Bulletin, 2017, 62(6): 576–589. doi: 10.1360/N972016-00754
[9] GU G X, SU I, SHARMA S, et al. Three-dimensional-printing of bio-inspired composites [J]. Journal of Biomechanical Engineering, 2016, 138(2): 021006. doi: 10.1115/1.4032423
[10] 刘英志, 雷建银, 王志华. 冲击载荷下仿贝壳砖泥结构的动态响应 [J]. 高压物理学报, 2022, 36(1): 014202. doi: 10.11858/gywlxb.20210790 LIU Y Z, LEI J Y, WANG Z H. Dynamic response of narce-like brick and mortar structure under impact load [J]. Chinese Journal of High Pressure Physics, 2022, 36(1): 014202. doi: 10.11858/gywlxb.20210790
[11] PADOLE M, GHARDE S, KANDASUBRAMANIAN B. Three-dimensional printing of molluscan shell inspired architectures via fused deposition modeling [J]. Environmental Science and Pollution Research, 2021, 28(34): 46356–46366. doi: 10.1007/s11356-020-09799-6
[12] YADAV R, GOUD R, DUTTA A, et al. Biomimicking of hierarchal molluscan shell structure via layer by layer 3D printing [J]. Industrial & Engineering Chemistry Research, 2018, 57(32): 10832–10840. doi: 10.1021/acs.iecr.8b01738
[13] WU K J, ZHENG Z J, ZHANG S S, et al. Interfacial strength-controlled energy dissipation mechanism and optimization in impact-resistant nacreous structure [J]. Materials & Design, 2019, 163: 107532. doi: 10.1016/j.matdes.2018.12.004
[14] GU G X, TAKAFFOLI M, BUEHLER M J. Hierarchically enhanced impact resistance of bioinspired composites [J]. Advanced Materials, 2017, 29(28): 1700060. doi: 10.1002/adma.201700060
[15] WU X D, MENG X S, ZHANG H G. An experimental investigation of the dynamic fracture behavior of 3D printed nacre-like composites [J]. Journal of the Mechanical Behavior of Biomedical Materials, 2020, 112: 104068. doi: 10.1016/j.jmbbm.2020.104068
[16] RITCHIE R O. The conflicts between strength and toughness [J]. Nature Materials, 2011, 10(11): 817–822. doi: 10.1038/nmat3115
[17] TRAN P, NGO T D, GHAZLAN A, et al. Bimaterial 3D printing and numerical analysis of bio-inspired composite structures under in-plane and transverse loadings [J]. Composites Part B: Engineering, 2017, 108: 210–223. doi: 10.1016/j.compositesb.2016.09.083
[18] WU K J, SONG Y H, ZHANG X, et al. A prestressing strategy enabled synergistic energy-dissipation in impact-resistant nacre-like structures [J]. Advanced Science, 2022, 9(6): 2104867. doi: 10.1002/advs.202104867
[19] WANG J, HU D Y, ZHANG Z Q, et al. Anti-impact performance of bionic tortoiseshell-like composites [J]. Composite Structures, 2023, 303: 116315. doi: 10.1016/j.compstruct.2022.116315
[20] KO K, JIN S, LEE S E, et al. Impact resistance of nacre-like composites diversely patterned by 3D printing [J]. Composite Structures, 2020, 238: 111951. doi: 10.1016/j.compstruct.2020.111951
[21] KO K, LEE S, HWANG Y K, et al. Investigation on the impact resistance of 3D printed nacre-like composites [J]. Thin-Walled Structures, 2022, 177: 109392. doi: 10.1016/j.tws.2022.109392
[22] WEI Z Q, XU X H. Gradient design of bio-inspired nacre-like composites for improved impact resistance [J]. Composites Part B: Engineering, 2021, 215: 108830. doi: 10.1016/j.compositesb.2021.108830
[23] 李志洋, 雷建银, 刘志芳. 爆炸载荷下仿贝壳结构的动态响应 [J]. 爆炸与冲击, 2022, 42(8): 083101. doi: 10.11883/bzycj-2022-0145 LI Z Y, LEI J Y, LIU Z F. Dynamic response of nacre-like structure under explosion load [J]. Explosion and Shock Waves, 2022, 42(8): 083101. doi: 10.11883/bzycj-2022-0145
[24] CHEN B C, ZOU M, LIU G M, et al. Experimental study on energy absorption of bionic tubes inspired by bamboo structures under axial crushing [J]. International Journal of Impact Engineering, 2018, 115: 48–57. doi: 10.1016/j.ijimpeng.2018.01.005