[1] 李得天. 真空计量的新进展[J]. 上海计量测试,2003(5):4−10 (in Chinese) doi: 10.3969/j.issn.1673-2235.2003.05.001 Li D T. Recent advances in vacuum metrology[J]. Shanghai Metrology and Testing,2003(5):4−10 doi: 10.3969/j.issn.1673-2235.2003.05.001
[2] 达道安. 真空设计手册[M]. 北京: 国防工业出版社. 2004, 1311−1314; 98−132 (in Chinese) Da D A. Vacuum design handbook[M]. Beijing: National Defense Industry Press, 2004, 1311−1314; 98−132
[3] 魏本猛. 多孔氧化铝型标准漏孔可控制作研究[D]. 合肥:合肥工业大学, 2019 (in Chinese) Wei B M. Research on controllable manufacturing of porous aluminum oxide standard leakage holes[D]. Hefei: Hefei University of Technology, 2019
[4] 刘赐贤, 张涤新, 冯焱, 等. 金属压扁型正压漏孔不同压力下的漏率研究[J]. 真空与低温,2011,17(4):218−223 (in Chinese) doi: 10.3969/j.issn.1006-7086.2011.04.007 Liu C X, Zhang D X, Feng Y, et al. Study on the leakage rate of metal flattened positive pressure leak hole at different pressures[J]. Vacuum and Low Temperature,2011,17(4):218−223 doi: 10.3969/j.issn.1006-7086.2011.04.007
[5] 刘燚, 刘贝贝, 周宇仁, 等. 基于不同气体和压力下通道型正压标准漏孔漏率的分析[J]. 上海计量测试,2022,49(1):31−33 (in Chinese) doi: 10.3969/j.issn.1673-2235.2022.01.011 Liu Y, Liu B B, Zhou Y R, et al. Analysis of leakage rate of channel-type positive pressure standard leak holes under different gases and pressures[J]. Shanghai Metrology and Testing,2022,49(1):31−33 doi: 10.3969/j.issn.1673-2235.2022.01.011
[6] 俞和君, 孙涛. 小流量正压标准漏孔的自动补压式校准方法[J]. 仪器仪表标准化与计量,2023(03):20−21+27 (in Chinese) Yu H J, Sun T. Automatic pressure compensation calibration method for small flow positive pressure standard leakage holes[J]. Standardization and Metrology of Instruments and Meters,2023(03):20−21+27
[7] 刘波, 丁立莉, 张蕾. 正压漏孔校准装置性能研究[J]. 真空与低温,2018,24(03):162−166 (in Chinese) Liu B, Ding L L, Zhang L. Performance study of positive pressure leak calibration device[J]. Vacuum and Low Temperature,2018,24(03):162−166
[8] 张书令, 许红, 洪扁, 等. 正压标准漏孔校准装置[J]. 中国测试,2015,41(S1):6−9 (in Chinese) Zhang S L, Xu H, Hong B, et al. Positive pressure standard leak calibration device[J]. China Testing,2015,41(S1):6−9
[9] 刘燚, 刘贝贝, 张忠立, 等. 多孔泡沫金属填充的通道型正压标准漏孔漏率的数值模拟[J]. 真空科学与技术学报,2023,43(11):931−937 (in Chinese) Liu Y, Liu B B, Zhang Z L, et al. Numerical simulation of channel type positive pressure standard leak rate filled with porous foam metal[J]. Journal of Vacuum Science and Technology,2023,43(11):931−937
[10] 许艳芝, 朱惠人, 郑杰. 克努森数在微尺度相似流动特性研究中的作用[J]. 航空动力学报,2013,28(8):1752−1758 (in Chinese) Xu Y Z, Zhu H R, Zheng J. The role of Knudsen number in the study of microscale similar flow characteristics[J]. Journal of Aerodynamics,2013,28(8):1752−1758
[11] Narayanan S, Fedorov A G, et al. Heat and mass transfer during evaporation of thin liquid films confined by nanoporous membranes subjected to air jet impingement[J]. International Journal of Heat and Mass Transfer,2013(58):300−311
[12] Shadi M, Kambiz V. A synthesis of fluid and thermal transport models for metal foam heat exchangers[J]. International Journal of Heat and Mass Transfer,2008(51):3701−3711