[1] Li Z, Wei R, Wen Q, et al. Microstructure and mechanical properties of SiC ceramic joints vacuum brazed with in-situ formed SiC particulate reinforced Si-24Ti alloy[J]. Vacuum,2020,173:109160 doi: 10.1016/j.vacuum.2019.109160
[2] Shi H, Peng H, Chai Y, et al. Effect of Zr addition on the interfacial reaction of the SiC joint brazed by Inconel 625 powder filler[J]. Journal of the European Ceramic Society,2021,41(13):6238−6247 doi: 10.1016/j.jeurceramsoc.2021.06.047
[3] Wu J, Yan J, Peng H, et al. Reaction mechanism and mechanical properties of SiC joint brazed by in-situ formation of Ti3SiC2[J]. Journal of the European Ceramic Society,2024,44(6):3777−3783 doi: 10.1016/j.jeurceramsoc.2023.12.097
[4] Li H X, Zhong Z H, Zhang H B, et al. Microstructure characteristic and its influence on the strength of SiC ceramic joints diffusion bonded by spark plasma sintering[J]. Ceramics International,2018,44(4):3937−3946 doi: 10.1016/j.ceramint.2017.11.185
[5] Ming A, Li C, Liu Y, et al. Understanding the oxidation behavior of TiAl alloy joints brazed using Ti and Ni based filler[J]. Journal of Materials Research and Technology,2024,28:2033−2044 doi: 10.1016/j.jmrt.2023.12.040
[6] 刘自豪, 颜家振, 李宁, 等. NiTi+Ni钎料真空钎焊SiC陶瓷的微观组织及性能[J]. 热加工工艺,2023,52(19):20−23 (in Chinese) Liu Z H, Yan J Z, Li N, et al. Microstructure and properties of vacuum brazing SiC ceramics with NiTi+Ni filler[J]. Hot Working Technology,2023,52(19):20−23
[7] Kamal A, Shukla A K, Shinde V M, et al. Effect of Mo addition on interfacial microstructure and mechanical property of SiC joint brazed by an Ni-Si filler[J]. Journal of the American Ceramic Society,2024,107(5):2861−2876 doi: 10.1111/jace.19677
[8] Wang Z, Liu Y, Zhang H, et al. Joining of SiC ceramics using the Ni-Mo filler alloy forheat exchanger applications[J]. Journal of the European Ceramic Society,2021,41(15):7533−7542 doi: 10.1016/j.jeurceramsoc.2021.07.056
[9] 王子康, 刘岩, 杨金晶, 等. Ni基高温钎料连接SiC陶瓷的微观结构和力学性能[J]. 焊接,2023(2):8−16 (in Chinese) doi: 10.12073/j.hj.20220429005 Wang Z K, Liu Y, Yang J J, et al. Microstructure and mechanical properties of SiC/SiC joints brazed with Ni-based high-temperature filler[J]. Welding & Joining,2023(2):8−16 doi: 10.12073/j.hj.20220429005
[10] Shi H, Chai Y, Li N, et al. Interfacial reaction mechanism of SiC joints joined by pure nickel foil[J]. Journal of the European Ceramic Society,2020,40(15):5162−5171 doi: 10.1016/j.jeurceramsoc.2020.07.048
[11] He H, Lu C, He Y, et al. Characterization of sic ceramic joints brazed using Au-Ni-Pd-Ti high-temperature filler alloy[J]. Materials,2019,12(6):931 doi: 10.3390/ma12060931
[12] Leinenbach C, Transchel R, Gorgievski K, et al. Microstructure and mechanical performance of Cu-Sn-Ti-based active braze alloy containing in situ formed nano-sized TiC particles[J]. Journal of materials engineering and performance,2015,24(5):2042−2050 doi: 10.1007/s11665-015-1471-8
[13] Deng X, Cui J, Zhang G. Effects of TiC powder characteristics and sintering temperature on the microstructure and mechanical properties of TiC-20Mo-10Ni cermets[J]. Metallurgical and materials transactions. A, Physical metallurgy and materials science,2023,54(12):4940−4951 doi: 10.1007/s11661-023-07215-5
[14] 王兴, 成来飞, 范尚武, 等. Cu-Ti+Mo连接2D C/SiC复合材料与GH783的接头微结构与性能[J]. 稀有金属材料与工程,2012,41(09):1544−1548 (in Chinese) doi: 10.3969/j.issn.1002-185X.2012.09.009 Wang X, Cheng L F, Fan S W, et al. Microstructure and properties of 2D C/SiC composite/GH783 joint brazed with Cu-Ti+Mo composite filler[J]. Rare Metal Materials and Engineering,2012,41(09):1544−1548 doi: 10.3969/j.issn.1002-185X.2012.09.009
[15] Tellouche G, Mangelinck D, Hoummada K, et al. Further insights into the growth mechanism of the non-stoichiometric θ-Ni2Si phase[J]. Vacuum,2021,187:110075 doi: 10.1016/j.vacuum.2021.110075
[16] Panciera F, Mangelinck D, Hoummada K, et al. Direct epitaxial growth of θ-Ni2Si by reaction of a thin Ni(10at.% Pt) film with Si(100) substrate[J]. Scripta Materialia,2014,78-79:9−12 doi: 10.1016/j.scriptamat.2014.01.010
[17] Zhong Z, Hou G, Zhu Z, et al. Microstructure and mechanical strength of SiC joints brazed with Cr3C2 particulate reinforced Ag-Cu-Ti brazing alloy[J]. Ceramics International,2018,44(10):11862−11868 doi: 10.1016/j.ceramint.2018.04.002
[18] Peteves S D, Nicholas M G. Evaluation of brazed silicon nitride joints: microstructure and mechanical properties[J]. Journal of the American Ceramic Society,1996,79(6):1553−1562 doi: 10.1111/j.1151-2916.1996.tb08764.x
[19] Tian W B, Sun Z M, Zhang P, et al. Brazing of silicon carbide ceramics with Ni-Si-Ti powder mixtures[J]. Journal of the Australian Ceramic Society,2017,53(2):511−516 doi: 10.1007/s41779-017-0061-7
[20] Ma Q, Chen Y W, Chen S J, et al. Microstructural and mechanical characterizations of SiC-304SS joints brazed with Cu-10TiH2 filler[J]. Journal of Materials Research and Technology,2024,28:3076−3083 doi: 10.1016/j.jmrt.2023.12.226
[21] Zhang G , Xiong W , Yang Q , et al. Effect of Mo addition on microstructure and mechanical properties of (Ti, W)C solid solution based cermets[J]. International Journal of Refractory Metals & Hard Materials, 2014, 43: 77−82