热轧温度对Ti-Zr-V-Nb-Si合金微观组织和力学性能的影响

刘娅; 张朝晖; 何杨宇; 贾晓彤; 王强; 冯向向; 程兴旺

doi:10.13922/j.cnki.cjvst.202402011

[1]

Ritchie R O. The conflicts between strength and toughness[J]. Nature Materials, Nature Publishing Group,2011,10(11):817−822

[2]

Gao Q, Song K, Yan D, et al. Structure-property relations of lightweight Ti-Sc-Zr-Nb-V high-entropy alloys[J]. Journal of Alloys and Compounds,2022,915:165295 doi: 10.1016/j.jallcom.2022.165295

[3]

Liu Y, Yao Z, Zhang P, et al. Tailoring high-temperature oxidation resistance of FeCrMnVSi_x high entropy alloy coatings via building Si-rich dendrite microstructure[J]. Applied Surface Science,2022,606:154862 doi: 10.1016/j.apsusc.2022.154862

[4]

Tang Z, Senkov O N, Parish C M, et al. Tensile ductility of an AlCoCrFeNi multi-phase high-entropy alloy through hot isostatic pressing (HIP) and homogenization[J]. Materials Science and Engineering: A,2015,647:229−240 doi: 10.1016/j.msea.2015.08.078

[5]

Miao J, Slone C E, Smith T M, et al. The evolution of the deformation substructure in a Ni-Co-Cr equiatomic solid solution alloy[J]. Acta Materialia,2017,132:35−48 doi: 10.1016/j.actamat.2017.04.033

[6]

吴炳乾, 饶湖常, 张冲, 等. Si含量对FeCoCr_0.5NiBSi_x高熵合金涂层组织结构和耐磨性的影响[J]. 表面技术,2015,44(12):85−91(in Chinese) Wu B Q, Rao H C, ZHANG C, et al. Effect of silicon content on the microstructure and wear resistance of FeCoCr_0.5NiBSi_x high-entropy alloy coatings[J]. Surface Technology,2015,44(12):85−91

[7]

Chen L, Zhou Z, Tan Z, et al. High temperature oxidation behavior of Al_0.6CrFeCoNi and Al_0.6CrFeCoNiSi_0.3 high entropy alloys[J]. Journal of Alloys and Compounds,2018,764:845−852 doi: 10.1016/j.jallcom.2018.06.036

[8]

Wang N, Wang S, Gou X, et al. Alloying behavior and characterization of (CoCrFeNiMn)₉₀M₁₀ (M=Al, Hf) high-entropy materials fabricated by mechanical alloying[J]. Transactions of Nonferrous Metals Society of China,2022,32(7):2253−2265 doi: 10.1016/S1003-6326(22)65945-4

[9]

Ye Y F, Wang Q, Lu J, et al. High-entropy alloy: challenges and prospects[J]. Materials Today,2016,19(6):349−362 doi: 10.1016/j.mattod.2015.11.026

[10]

刘欣宁, 徐少华, 王璇. Y对轴承钢上激光熔覆FeCoCrNi涂层结构和冲蚀磨损的影响[J]. 真空科学与技术学报,2021,41(6):534−538(in Chinese) Liu X N, Xu S H, Wang X. Effect of Y on the structure and erosion wear of laser-cladding FeCoCrNi coating on bearing steel[J]. Chinese Journal Vacuum Science and Technology,2021,41(6):534−538

[11]

Chen Y, Xu Z, Wang M, et al. A single-phase V_0.5Nb_0.5ZrTi refractory high-entropy alloy with outstanding tensile properties[J]. Materials Science and Engineering: A,2020,792:139774 doi: 10.1016/j.msea.2020.139774

[12]

Wu Y D, Cai Y H, Wang T, et al. A refractory Hf₂₅Nb₂₅Ti₂₅Zr₂₅ high-entropy alloy with excellent structural stability and tensile properties[J]. Materials Letters,2014,130:277−280 doi: 10.1016/j.matlet.2014.05.134

[13]

Yao T T, Zhang Y G, Yang L, et al. A metastable Ti–Zr–Nb–Al multi-principal-element alloy with high tensile strength and ductility[J]. Materials Science and Engineering: A,2022,851:143646 doi: 10.1016/j.msea.2022.143646

[14]

Chen Y, Li Y, Cheng X, et al. The microstructure and mechanical properties of refractory high-entropy alloys with high plasticity[J]. Materials (Basel, Switzerland),2018,11(2):208

[15]

Liu Y, Zhang Y, Zhang H, et al. Microstructure and mechanical properties of refractory HfMo_0.5NbTiV_0.5Si_x high-entropy composites[J]. Journal of Alloys and Compounds,2017,694:869−876 doi: 10.1016/j.jallcom.2016.10.014

[16]

Zhang Y, Liu Y, Li Y, et al. Microstructure and mechanical properties of a refractory HfNbTiVSi_0.5 high-entropy alloy composite[J]. Materials Letters,2016,174:82−85 doi: 10.1016/j.matlet.2016.03.092

[17]

Guo N N, Wang L, Luo L S, et al. Microstructure and mechanical properties of refractory high entropy (Mo_0.5NbHf_0.5ZrTi)BCC/M₅Si₃ in-situ compound[J]. Journal of Alloys and Compounds,2016,660:197−203 doi: 10.1016/j.jallcom.2015.11.091

[18]

Otto F, Yang Y, Bei H, et al. Relative effects of enthalpy and entropy on the phase stability of equiatomic high-entropy alloys[J]. Acta Materialia,2013,61(7):2628−2638 doi: 10.1016/j.actamat.2013.01.042

[19]

王海艳, 孙旭, 王培芹, 等. 真空自耗熔炼制备Ti-22V-10Cr-2Zn-xY合金的组织和力学性能分析[J]. 真空科学与技术学报,2020,40(7):653−657(in Chinese) Wang H Y, Sun X, Wang P Q, et al. Property modification of vacuum consumption-molten Ti-V-Cr alloy by Y-Doping[J]. Chinese Journal Vacuum Science and Technology,2020,40(7):653−657

[20]

邓彦波, 刘玮. 真空电弧熔炼轮毂用AlCrFeCuNi-xB高强合金温氧化性能[J]. 真空科学与技术学报,2020,40(11):1070−1074(in Chinese) Deng Y B, Liu Wei. Oxidation resistance of AlCrFeCuNi alloy modified by B-Doping in vacuum Arc-Melting[J]. Chinese Journal Vacuum Science and Technology,2020,40(11):1070−1074

[21]

He J Y, Wang H, Huang H L, et al. A precipitation-hardened high-entropy alloy with outstanding tensile properties[J]. Acta Materialia,2016,102:187−196 doi: 10.1016/j.actamat.2015.08.076

[22]

Takeuchi A, Inoue A. Classification of bulk metallic glasses by atomic size difference, heat of mixing and period of constituent elements and its application to characterization of the main alloying element[J]. Materials Transactions,2005,46(12):2817−2829 doi: 10.2320/matertrans.46.2817

[23]

Zhang S, Wang Z, Yang H J, et al. Ultra-high strain-rate strengthening in ductile refractory high entropy alloys upon dynamic loading[J]. Intermetallics,2020,121:106699 doi: 10.1016/j.intermet.2020.106699

[24]

George E P, Curtin W A, Tasan C C. High entropy alloys: A focused review of mechanical properties and deformation mechanisms[J]. Acta Materialia,2020,188:435−474 doi: 10.1016/j.actamat.2019.12.015

[25]

杨雨茜. 轧制变形对CrMnFeCoNiAl_0.6高熵合金组织与性能的影响[D]. 哈尔滨工业大学, 2022(in Chinese) Yang Y X. Effect of rolling deformation on microstructure and properties of CrMnFeCoNiAl_0.6 High-entropy alloy[D]. Harbin Institute of Technology, 2022

[26]

杨勇, 赫全锋. 高熵合金中的晶格畸变[J]. 金属学报, 57(4): 385–392(in Chinese) Yang Y, He Q F. Lattice distortion in high-entropy alloys[J]. Acta Metallurgica Sinica, 57(4): 385–392

[27]

Tsakiropoulos P. On Nb silicide based alloys: alloy design and selection[J]. Materials (Basel, Switzerland),2018,11(5):844

[28]

Fuller C B, Seidman D N, Dunand D C. Mechanical properties of Al(Sc, Zr) alloys at ambient and elevated temperatures[J]. Acta Materialia,2003,51(16):4803−4814 doi: 10.1016/S1359-6454(03)00320-3

[29]

Ren Y, Wu H, Liu B, et al. A novel L12-strengthened AlCoCuFeNi high-entropy alloy with both high hardness and good corrosion resistance[J]. Materials Letters,2023,331:133339 doi: 10.1016/j.matlet.2022.133339