[1] 达道安. 真空设计手册第三版[M]. 北京: 国防工业出版社, 2004 (in Chinese) Da D A. The third edition of vacuum design manual[M]. Beijing: National defence industrial press, 2004
[2] 刘金策. 基于fluent的真空系统元件气体流动模拟计算方法的研究[M]. 沈阳: 东北大学, 2010 (in Chinese) Liu J C. A study on calculation method of vacuum system components gas flow simulation based on fluent[M]. Shenyang: Northeastern University, 2010
[3] 王宝霞, 张世伟. 真空工程理论基础[M]. 沈阳: 东北大学, 2011 (in Chinese) Wang B X, Zhang S W. Theoretical basis of vacuum engineering[M]. Shenyang: Northeastern University, 2011
[4] 张波, 王洁, 尉伟, 等. 蒙特卡洛计算分子流态下真空管道的传输几率[J]. 真空科学与技术学报,2014,34(6):571−574 (in Chinese) Zhang B, Wang J, Wei W, et al. Monte carlo calculation of transmission probability in vacuum tube under molecular flow conditions[J]. Journal of vacuum science and technology,2014,34(6):571−574
[5] 张世伟, 姬国钊, 韩进, 等. 气体分子以分子流态通过直圆管道时的位置分布计算[J]. 真空科学与技术学报,2010,30(6):626−631 (in Chinese) Zhang S W, Ji G Z, Han J, et al. Calculation of positional distributions of molecular flux at orifice of cylindrical pipe[J]. Journal of vacuum science and technology,2010,30(6):626−631
[6] 隋吉秋. 空间环境模拟器真空抽气过程的计算研究[M]. 沈阳: 东北大学, 2016 (in Chinese) Sui J Q. Computational study on the vacuum pumping process in a space environment simulator[M]. Shenyang: Northeastern University, 2016
[7] 牟如意, 张世伟, 张志军, 等. 涡轮分子泵入口接管束流效应的蒙特卡洛计算[J]. 真空科学与技术学报,2017,37(8):753−759 (in Chinese) Mu R Y, Zhang S W, Zhang Z J, et al. Monte carlo simulation of beaming effect of molecular flow via inlet tube of turbo molecular pump[J]. Journal of vacuum science and technology,2017,37(8):753−759
[8] 刘斌. 流体仿真从入门到精通[M]. 北京: 清华大学出版社, 2022 (in Chinese) Liu B. From beginner to proficient in fluid simulation[M]. Beijing: Tsinghua University, 2022
[9] 江帆, 黄瑞. 基于FLUENT 的异径管管内流体流动特性分析[J]. 焊管,2022,45(11):27−30 (in Chinese) Jiang F, Huang R. Analysis of fluid flow characteristics inside reducing pipes based on fluent[J]. Journal of welded pipe and tube,2022,45(11):27−30
[10] 党睿, 王亚丽, 马元博, 等. 气体管内流动相似性的FLUENT数值模拟研究[J]. 榆林学院学报,2018,28(6):56−59 (in Chinese) Dang R, Wang Y L, Ma Y B, et al. Fluent numerical simulation study on flow similarity within gas pipes[J]. Journal of Yulin University,2018,28(6):56−59
[11] 周佳, 朱目成, 巫帅珍, 等. 180°方形截面弯管内流动特性研究[J]. 化工机械,2016,43(2):214−217 (in Chinese) doi: 10.3969/j.issn.0254-6094.2016.02.019 Zhou J, Zhu M C, Wu S Z, et al. Study on flow characteristics within a 180° square-section elbow[J]. Journal of Chemical Machinery,2016,43(2):214−217 doi: 10.3969/j.issn.0254-6094.2016.02.019