[1] 白少先, 李栋, 樊世超. 真空环境下高温气体静密封界面泄漏特性分析[J]. 航天器环境工程, 2019, 36(5): 422−427 (in Chinese) doi: 10.12126/see.2019.05.003 Bai S X, Li D, Fan S C. Leakage characteristics of thermal interface of hydrostatic gas seal in vacuum environment[J]. Spacecraft Environment Engineering, 2019, 36(5): 422−427 doi: 10.12126/see.2019.05.003
[2] Zhang B, Yu M, Yang H. Leakage analysis and ground tests of the O-type rubber ring seal applied in lunar sample return devices[J]. Proceedings of the Institution of Mechanical Engineers Part G Journal of Aerospace Engineering Philip, 2014, 229(3): 479−491
[3] Kim G H, Lee Y S , Yang H L. A new design concept of metal O-ring seal for long-term performance[J]. Vacuum, 2016, 123: 54−61
[4] Wu D, Wang S, Wang X. A novel stress distribution analytical model of O-ring seals under different properties of materials[J]. Journal of Mechanical Science & Technology, 2017, 31(1): 289−296
[5] WANG L N, SUN H C, QI L, et al. Effect of stress relaxation on globe-cone seal performance with a gasket[J]. Vacuum, 2019, 168: 1−7
[6] 王莉娜, 孙恒超, 孙伟, 等. 考虑压力松弛效应的球头-锥面密封性能分析[J]. 哈尔滨工业大学学报, 2020, 52(1): 156−162 (in Chinese) Wang L N, Sun H C, Sun W, et al. Performance analysis of globe-cone sealing considering stress relaxation effect[J]. Journal of Harbin Institute of Technology, 2020, 52(1): 156−162
[7] Liu J, Li X B, Xu L K, et al. Service lifetime estimation of EPDM rubber based on accelerated aging tests[J]. Journal of Materials Engineering and Performance, 2017, 26: 1735−1740 doi: 10.1007/s11665-017-2519-8
[8] 郭崇武, 史纪军, 孙立臣, 等. 热氧老化效应对橡胶密封接触性能的影响[J]. 真空, 2024, 61(03): 33−39 (in Chinese) Guo C W, Shi J J, Sun L C, et al. The effect of thermal oxygen aging on the contact performance of rubber seals[J]. Vacuum, 2024, 61(03): 33−39
[9] Kong E, Yoon B, Nam J D, ea al. Accelerated aging and lifetime prediction of graphene-reinforced natural rubber composites[J]. Macromolecular Research, 2018, 26(11): 998−1003
[10] Liu Q B, Shi W K, Chen Z Y, et al. Rubber accelerated ageing life prediction by Peck model considering initial hardness influence[J]. Polymer Testing, 2019, 80: 1−10
[11] Persson B N J, Yang C. Theory of the leak-rate of seals[J]. Journal of Physics: Condensed Matter, 2008, 20(31): 1959−1964
[12] Lorenz B, Persson B N J. Leak rate of seals: comparison of theory with experiment[J]. Europhysics Letters, 2009, 86(4): 44006 doi: 10.1209/0295-5075/86/44006
[13] Sun J J, Wei L, Feng X, et al. Leakage prediction method for contacting mechanical seals with parallel faces[J]. Chinese Journal of Mechanical Engineering, 2010, 23(1): 7−15 doi: 10.3901/CJME.2010.01.007
[14] Gu B Q, Sun Z G, Li Y Y, et al. Study on time-correlated leakage predication model of nonmetallic gaskets[J]. Advanced Materials Research, 2010, 97−101: 629−633.
[15] Grine L, Bouzid A H. Prediction of leak rates through porous gaskets at high temperature[J]. Journal of Pressure Vessel Technology, 2012, 135(2): 215−221
[16] Li X, Peng G L. Research on leakage prediction calculation method for static seal ring in underground equipments[J]. Journal of Mechanical Science and Technology, 2016, 30(6): 2635−2641
[17] Yu Q P, Sun J J, Ma C B, et al. A percolation method of leakage calculation and prediction within the mechanical seal interface[J]. Journal of Tribology, 2019, 141(12): 1−9
[18] 王莉娜, 史纪军, 李征, 等. 长服役期橡胶密封性能分析与寿命评估[J]. 航天器环境工程, 2022, 39(5): 475−481 (in Chinese) doi: 10.12126/see.2022.05.005 Wang L N, Shi J J, Li Z, et al. Performance analysis and lifetime evaluation of rubber seal for long term service[J]. Spacecraft Environment Engineering, 2022, 39(5): 475−481 doi: 10.12126/see.2022.05.005
[19] 北京卫星环境工程研究所. 一种橡胶密封寿命评估方法: CN202110565554.6[P]. 2022-05-24 Beijing institute of spacecraft environment engineering. Rubber seal life assessment method: CN202110565554.6[P]. 2022-05-24