[1] 周宝洪. 干式螺杆真空泵的螺杆设计与计算[J]. 真空, 2001(3): 46−48 (in Chinese) doi: 10.3969/j.issn.1002-0322.2001.03.013 Zhou B H. Screw design and calculation of dry screw vacuum pump[J]. Vacuum, 2001(3): 46−48 doi: 10.3969/j.issn.1002-0322.2001.03.013
[2] 邢子文, 吴华根, 束鹏程. 螺杆压缩机设计理论与关键技术的研究和开发[J]. 西安交通大学学报, 2007(7): 755−763,810 (in Chinese) doi: 10.3321/j.issn:0253-987X.2007.07.001 Xing Z W, Wu H G, Shu P C. Research and development on design theory and key technology for screw compressors[J]. Journal of Xi'an Jiaotong University, 2007(7): 755−763,810 doi: 10.3321/j.issn:0253-987X.2007.07.001
[3] 程寅, 王桂鹏, 李喆, 等. 螺杆真空泵内气体热力过程的数值计算及模拟分析[J]. 真空科学与技术学报, 2024, 44(12): 1040−1051 (in Chinese) Cheng Y, Wang G P, Li Z, et al. Numerical calculation and simulation analysis of gas thermodynamic processes in screw vacuum pumps[J]. Journal of Vacuum Science and Technology, 2024, 44(12): 1040−1051
[4] 巫修海, 陈文华, 张宝夫. 内压缩干式螺杆真空泵工作特性数学建模[J]. 真空科学与技术学报, 2016, 36(9): 987−994 (in Chinese) Wu X H, Chen W H, Zhang B F. Modeling and evaluation of characteristics of dry screw vacuum pump with internal compression[J]. Journal of Vacuum Science and Technology, 2016, 36(9): 987−994
[5] 卢阳, 郭蓓, 周瑞鑫. 双螺杆真空泵工作过程数值模拟[J]. 西安交通大学学报, 2015, 49(7): 67−71 (in Chinese) doi: 10.7652/xjtuxb201507012 Lu Y, Guo B, Zhou R X. Numerical simulation for working process in twin screw vacuum pump[J]. Journal of Xi'an Jiaotong University, 2015, 49(7): 67−71 doi: 10.7652/xjtuxb201507012
[6] 李丹童, 何志龙, 邢子文. 干式螺杆真空泵内部泄漏过程建模及分析[J]. 真空科学与技术学报, 2021, 41(10): 959−968 (in Chinese) Li D T, He Z L, Xing Z W. Modeling and analysis for the leakage process in dry screw vacuum pumps[J]. Journal of Vacuum Science and Technology, 2021, 41(10): 959−968
[7] Li D T, He Z, Sun S, et al. Dynamic characteristics modelling and analysis for dry screw vacuum pumps[J]. Vacuum, 2022, 198: 110868 doi: 10.1016/j.vacuum.2022.110868
[8] Li D T, He Z, Wang C, et al. Simulation of dry screw vacuum pumps based on chamber model and thermal resistance network[J]. Applied Thermal Engineering, 2022, 211: 118460 doi: 10.1016/j.applthermaleng.2022.118460
[9] 王健. 基于多物理场耦合的螺杆泵运转态间隙设计方法研究[D]. 沈阳: 东北大学, 2022 (in Chinese) Wang J. Study on the design method of operating clearance of screw pump based on multi-physics coupling[D]. Shenyang: Northeastern University, 2022
[10] Burmistrov A, Salikeev S, Bronshtein M, et al. Conductance calculation of slot channels with variable cross section: from molecular to viscous flow regime[J]. Vakuum in Forschung und Praxis, 2015, 27(1): 36−40 doi: 10.1002/vipr.201500571
[11] Sharipov F. Rarefied gas flow through a long rectangular channel[J]. Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films, 1999, 17(5): 3062−3066
[12] Salikeev S, Burmistrov A, Bronshtein M, et al. Conductance of slot channels formed by cylindrical walls: Monte Carlo calculations and experimental studies in the molecular gas flow regime[J]. Vakuum in Forschung und Praxis, 2013, 25(4): 34−38 doi: 10.1002/vipr.201300531
[13] Salikeev S, Burmistrov A, Bronshtein M, et al. Conductance calculation of channels in laminar gas flow regime at an arbitrary pressure difference[J]. Vacuum, 2014, 107: 178−183 doi: 10.1016/j.vacuum.2014.01.016
[14] Sharipov F, Kozak D V. Rarefied gas flow through a thin slit at an arbitrary pressure ratio[J]. European Journal of Mechanics-B/Fluids, 2011, 30(5): 543−549 doi: 10.1016/j.euromechflu.2011.05.004
[15] 翟云飞, 张世伟, 孙坤, 等. 螺杆真空泵内气体热力过程的解析计算与实验研究[J]. 真空, 2020, 57(3): 54−60 (in Chinese) Zhai Y F, Zhang S W, Sun K, et al. Analytical calculation and experimental studies on gas thermodynamic processes in screw vacuum pump[J]. Vacuum, 2020, 57(3): 54−60
[16] 章恒. 螺杆真空泵LG-50设计及性能测算[D]. 合肥: 合肥工业大学, 2023 (in Chinese) Zhang H. Design and performance calculation of screw vacuum pump LG-50[D]. Hefei: Hefei University of Technology, 2023