2025 Volume 38 Issue 2
Article Contents

Xinfeng Wang, Han Wang, Yiran Wu, Yulong Lian, Jinyang Liu, Sangen Zhao. Water-Assisted Growth of Bi2Te3-Sb2Te3 Lateral Heterostructures for Enhanced Second Harmonic Generation[J]. Chinese Journal of Chemical Physics, 2025, 38(2): 240-248. doi: 10.1063/1674-0068/cjcp2401016
Citation: Xinfeng Wang, Han Wang, Yiran Wu, Yulong Lian, Jinyang Liu, Sangen Zhao. Water-Assisted Growth of Bi2Te3-Sb2Te3 Lateral Heterostructures for Enhanced Second Harmonic Generation[J]. Chinese Journal of Chemical Physics, 2025, 38(2): 240-248. doi: 10.1063/1674-0068/cjcp2401016

Water-Assisted Growth of Bi2Te3-Sb2Te3 Lateral Heterostructures for Enhanced Second Harmonic Generation

  • Corresponding author: E-mail: jyliu@fjnu.edu.cn; 
  • Received Date: 26/01/2024
    Available Online: 27/04/2025
  • The heterostructures incorporated with two or more distinctive two-dimensional (2D) materials have attracted great attention because they could give rise to enhanced property in comparison with their individual counterparts. Here, a water-assisted two-step rapid physical vapor deposition (rPVD) method was explored and used to synthesize Bi2Te3-Sb2Te3 lateral heterostructures (LHS) successfully. The Bi2Te3-Sb2Te3 LHS is in nearly uniform size, and grows along three particular orientations with the intersection angles of 120°. Interestingly, we found that the water molecules play a significant role in determining the growth orientation, namely whether it will grow along the vertical or lateral direction in 2D structure. Hence, a growth mechanism of LHS based on the water-assisted two-step rPVD was present, which can be used as a general strategy and extended to the growth of other 2D heterostructures or homostructures, such as SnS-SnSe LHS and SnS-SnS lateral homostructures. Furthermore, the second-harmonic generation intensity of the Bi2Te3-Sb2Te3 LHS is much stronger than that of the Bi2Te3/Sb2Te3 vertical heterostructures (VHS). This work opens a new approach for the synthesis of water-assisted lateral 2D heterostructures or homostructures and offers a new method to enhance the second-harmonic generation properties of topological insulating materials.
  • 加载中
  • [1] S. K. Chakraborty, B. Kundu, B. Nayak, S. P. Dash, and P. K. Sahoo, iScience 25, 103942 (2022).

    Google Scholar Pub Med

    [2] J. Y. Sun, Y. B. Chen, M. K. Priydarshi, T. Gao, X. J. Song, Y. F. Zhang, and Z. F. Liu, Adv. Mater. 28, 10333 (2016).

    Google Scholar Pub Med

    [3] W. Z. Yu, K. W. Gong, Y. Y. Li, B. B. Ding, L. Li, Y. K. Xu, R. Wang, L. B. Li, G. Y. Zhang, and S. H. Lin, Small 18, 2105383 (2022).

    Google Scholar Pub Med

    [4] X. D. Duan, C. Wang, J. C. Shaw, R. Cheng, Y. Chen, H. L. Li, X. P. Wu, Y. L. Tang, Q. L. Zhang, A. L. Pan, J. H. Jiang, R. Q. Yu, Y. Huang, and X. F. Duan, Nat. Nanotechnol. 9, 1024 (2014).

    Google Scholar Pub Med

    [5] Y. J. Gong, J. H. Lin, X. L. Wang, G. Shi, S. L. Lei, Z. Lin, X. L. Zou, G. Ye, R. Vajtai, B. I. Yakobson, H. Terrones, M. Terrones, B. K. Tay, J. Lou, S. T. Pantelides, Z. Liu, W. Zhou, and P. M. Ajayan, Nat. Mater. 13, 1135 (2014).

    Google Scholar Pub Med

    [6] S. H. Yang, P. Luo, F. K. Wang, T. Liu, Y. H. Zhao, Y. Ma, H. Q. Li, and T. Y, Zhai, Small 18, 2105211 (2022).

    Google Scholar Pub Med

    [7] Z. X. Zou, J. W. Liang, X. H. Zhang, C. Ma, P. Xu, X. Yang, Z. X. S. Zeng, X. X. Sun, C. G. Zhu, D. L. Liang, X. J. Zhuang, D. Li, and A. L. Pan, ACS Nano 15, 10039 (2021).

    Google Scholar Pub Med

    [8] H. Park, G. S. Jung, K. M. Ibrahim, Y. Lu, K. L. Tai, M. Coupin, and J. H. Warner, ACS Nano 16, 10260 (2022).

    Google Scholar Pub Med

    [9] J. S. Miao, Z. H. Xu, Q. Li, A. Bowman, S. M. Zhang, W. D. Hu, Z. X. Zhou, and C. Wang, ACS Nano 11, 10472 (2017).

    Google Scholar Pub Med

    [10] H. W. Liu, X. L. Zhu, X. X. Sun, C. G. Zhu, W. Huang, X. H. Zhang, B. Y. Zheng, Z. X. Zou, Z. Y. Luo, X. Wang, D. Li, and A. L. Pan, ACS Nano 13, 13573 (2019).

    Google Scholar Pub Med

    [11] V. Krishnamurthi, M. X. Low, S. Kuriakose, S. Sriram, M. Bhaskaran, and S. Walia, ACS Appl. Nano Mater. 4, 6928 (2021).

    Google Scholar Pub Med

    [12] X. M. Zhang, L. Y. Huangfu, Z. J. Gu, S. Q. Xiao, J. D. Zhou, H. Y. Nan, X. F. Gu, and K. Ostrikov, Small 17, 2007312 (2021).

    Google Scholar Pub Med

    [13] S. W. Li, Y. C. Liu, X. D. Zhao, Q. Y. Shen, W. Zhao, Q. W. Tan, N. Zhang, P. Li, L. F. Jiao, and X. H. Qu, Adv. Mater. 33, 2007480 (2021).

    Google Scholar Pub Med

    [14] Y. P. Yang, C. Y. Zou, C. R. Woods, Y. M. Shi, J. Yin, S. G. Xu, S. Ozdemir, T. Taniguchi, K. Watanabe, A. K. Geim, K. S. Novoselov, S. J. Haigh, and A. Mishchenko, Nano Lett. 19, 8526 (2019).

    Google Scholar Pub Med

    [15] N. J. Choudhari, Y. Raviprakash, S. D. George, and M. S. Murari, Int. J. Energy Res. 46, 7758 (2022).

    Google Scholar Pub Med

    [16] J. W. Wang, Z. Q. Li, H. Y. Chen, G. W. Deng, and X. B. Niu, Nano-Micro Lett. 11, 48 (2019).

    Google Scholar Pub Med

    [17] S. J. Haigh, A. Gholinia, R. Jalil, S. Romani, L. Britnell, D. C. Elias, K. S. Novoselov, L. A. Ponomarenko, A. K. Geim, and R. Gorbachev, Nat. Mater. 11, 764 (2012).

    Google Scholar Pub Med

    [18] W. Yang, G. R. Chen, Z. W. Shi, C. C. Liu, L. C. Zhang, G. B. Xie, M. Cheng, D. M. Wang, R. Yang, D. X. Shi, K. Watanabe, T. Taniguchi, Y. G. Yao, Y. B. Zhang, and G. Y. Zhang, Nat. Mater. 12, 792 (2013).

    Google Scholar Pub Med

    [19] J. E. Kim, W. T. Kang, V. T. Vu, Y. R. Kim, Y. S. Shin, I. Lee, U. Y. Won, B. H. Lee, K. Kim, T. L. Phan, Y. H. Lee, and W. Yu, J. Mater. Chem. C 9, 3504 (2021).

    Google Scholar Pub Med

    [20] X. S. Chen, Y. F. Qiu, H. H. Yang, G. B. Liu, W. Zheng, W. Feng, W. W. Cao, W. P. Hu, and P. G. Hu, ACS Appl. Mater. Interfaces 9, 1684 (2017).

    Google Scholar Pub Med

    [21] X. L. Qi and S. C. Zhang, Rev. Mod. Phys. 83, 1057 (2011).

    Google Scholar Pub Med

    [22] P. Guha, J. Y. Park, J. Jo, Y. Chang, H. Bae, R. K. Saroj, H. Lee, M. Kim, and G. C. Yi, 2D Mater. 9, 025006 (2022).

    Google Scholar Pub Med

    [23] H. Heo, J. H. Sung, J. H. Ahn, F. Ghahari, T. Taniguchi, K. Watanabe, P. Kim, and M. H. Jo, Adv. Electron. Mater. 3, 1600375 (2017).

    Google Scholar Pub Med

    [24] Z. Ju, C. Crawford, J. Adamczyk, E. S. Toberer, and S. M. Kauzlarich, ACS Appl. Mater. Interfaces 14, 24886 (2022).

    Google Scholar Pub Med

    [25] K. Von Klitzing, Annu. Rev. Condens. Matt. Phys. 8, 13 (2017).

    Google Scholar Pub Med

    [26] G. Bullard, F. Tassinari, C. H. Ko, A. K. Mondal, R. B. Wang, S. Mishra, R. Naaman, and M. J. Therien, J. Am. Chem. Soc. 141, 14707 (2019).

    Google Scholar Pub Med

    [27] H. M. Yi, Y. F. Zhao, Y. T. Chan, J. Cai, R. B. Mei, X. X. Wu, Z. J. Yan, L. J. Zhou, R. X. Zhang, Z. H. Wang, S. Paolini, R. Xiao, K. Wang, A. R. Richardella, J. Singleton, L. E. Winter, T. Prokscha, Z. Salman, A. Suter, P. P. Balakrishnan, A. J. Grutter, M. H. W. Chan, N. Samarth, X. D. Xu, W. D. Wu, C. X. Liu, and C. Z. Chang, Science 383, 634 (2024).

    Google Scholar Pub Med

    [28] J. Y. Liu, Y. H. Zhou, Y. Lin, M. L. Li, H. B. Cai, Y. C. Liang, M. Y. Liu, Z. G. Huang, F. Lai, F. C. Huang, and W. F. Zheng, ACS Appl. Mater. Interfaces 11, 4123 (2019).

    Google Scholar Pub Med

    [29] S. J. Wei, L. P. Ma, M. L. Chen, Z. B. Liu, W. Ma, D. M. Sun, H. M. Cheng, and W. C. Ren, Carbon 148, 241 (2019).

    Google Scholar Pub Med

    [30] L. F. Wang, B. Wu, H. T. Liu, L. Huang, Y. T. Li, W. Guo, X. Chen, P. Peng, L. Fu, Y. C. Yang, P. A. Hu, and Y. Q. Liu, Mater. Chem. Front. 1, 1836 (2017).

    Google Scholar Pub Med

    [31] Y. Z. Zhao and S. Jin, ACS Mater. Lett. 2, 42 (2020).

    Google Scholar Pub Med

    [32] Y. Jiang, X. Zhang, Y. Wang, N. Wang, D. West, S. B. Zhang, and Z. Zhang, Nano Lett. 15, 3147 (2015).

    Google Scholar Pub Med

    [33] W. Zhang, R. Yu, H. J. Zhang, X. Dai, and Z. Fang, New J. Phys. 12, 065013 (2010).

    Google Scholar Pub Med

    [34] M. Lin, D. Wu, Y. Zhou, W. Huang, W. Jiang, W. S. Zheng, S. L. Zhao, C. H. Jin, Y. F. Guo, H. L. Peng, and Z. F. Liu, J. Am. Chem. Soc. 135, 13274 (2013).

    Google Scholar Pub Med

    [35] Q. Cai, Q. K. Ju, W. T. Hong, C. Y. Jian, T. K. Wang, and W. Liu, Nanoscale 14, 1990 (2022).

    Google Scholar Pub Med

    [36] A. S. Sarkar, A. Mushtaq, D. Kushavah, and S. K. Pal, npj 2D Mater. Appl. 4, 1 (2020).

    Google Scholar Pub Med

    [37] J. Meier, L. Zurak, A. Locatelli, T. Feichtner, R. Kullock, and B. Hecht, Adv. Opt. Mater. 11, 2300731 (2023).

    Google Scholar Pub Med

    [38] Q. B. Guo, X. Z. Qi, L. S. Zhang, M. Gao, S. L. Hu, W. J. Zhou, W. J. Zang, X. X. Zhao, J. Y. Wang, B. M. Yan, M. Q. Xu, Y. K. Wu, G. Eda, Z. W. Xiao, S. A. Yang, H. Y. Gou, Y. P. Feng, G. C. Guo, W. Zhou, X. F. Ren, C. W. Qiu, S. J. Pennycook, and A. T. S. Wee, Nature 613, 53 (2023).

    Google Scholar Pub Med

    [39] D. C. Ouyang, X. P. Tong, S. H. Liu, J. Wang, Y. Zhao, R. Liu, X. Zhao, N. Zhang, F. R. Cao, Y. W. Liu, Y. Li, L. Li, and T. Y. Zhai, Adv. Funct. Mater. 32, 2113052 (2022).

    Google Scholar Pub Med

    [40] J. P. Wang, Y. Q. Fang, W. He, Q. Liu, J. R. Fu, X. Y. Li, Y. Liu, B. Gao, L. Zhen, C. Y. Xu, F. Q. Huang, A. J. Meixner, D. Zhang, and Y. Li, Adv. Opt. Mater. 11, 2300031 (2023).

    Google Scholar Pub Med

    [41] B. Jin, F. Liang, Z. Y. Hu, P. Wei, K. L. Liu, X. Z. Hu, G. Van Tendeloo, Z. S. Lin, H. Q. Li, X. Zhou, Q. H. Xiong, and T. Y. Zhai, Adv. Funct. Mater. 30, 1908902 (2020).

    Google Scholar Pub Med

    [42] F. B. Sousa, L. Lafeta, A. R. Cadore, P. K. Sahoo, and L. M. Malard, 2D Mater. 8, 035051 (2021).

    Google Scholar Pub Med

  • 加载中
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Figures(4)

Article Metrics

Article views(171) PDF downloads(0) Cited by(0)

Access History

Water-Assisted Growth of Bi2Te3-Sb2Te3 Lateral Heterostructures for Enhanced Second Harmonic Generation

Abstract: The heterostructures incorporated with two or more distinctive two-dimensional (2D) materials have attracted great attention because they could give rise to enhanced property in comparison with their individual counterparts. Here, a water-assisted two-step rapid physical vapor deposition (rPVD) method was explored and used to synthesize Bi2Te3-Sb2Te3 lateral heterostructures (LHS) successfully. The Bi2Te3-Sb2Te3 LHS is in nearly uniform size, and grows along three particular orientations with the intersection angles of 120°. Interestingly, we found that the water molecules play a significant role in determining the growth orientation, namely whether it will grow along the vertical or lateral direction in 2D structure. Hence, a growth mechanism of LHS based on the water-assisted two-step rPVD was present, which can be used as a general strategy and extended to the growth of other 2D heterostructures or homostructures, such as SnS-SnSe LHS and SnS-SnS lateral homostructures. Furthermore, the second-harmonic generation intensity of the Bi2Te3-Sb2Te3 LHS is much stronger than that of the Bi2Te3/Sb2Te3 vertical heterostructures (VHS). This work opens a new approach for the synthesis of water-assisted lateral 2D heterostructures or homostructures and offers a new method to enhance the second-harmonic generation properties of topological insulating materials.

    • Two-dimensional (2D) materials, including semimetals (e.g., NbSe2), semiconductors (e.g., MoS2, black phosphorus), and insulators (e.g., hexagonal boron nitride), have attracted substantial attention due to their unique physical and chemical features as well as their potential device applications [1−3]. These 2D materials can be integrated into vertical or lateral heterostructures, providing new properties and applications beyond their individual counterparts, which have emerged as a new exciting field of research [4, 5]. Vertical heterostructures (VHS), combined with van der Waals force, should be possible to create a substantial variety of artificial heterostructures [6−10], such as MoS2/black phosphorus [11], MoS2/WS2 [12], MoS2/Graphene [13], GaSe/MoS2 [7], and so on. Although the VHS allows for large lattice mismatches [9] and stacking 2D materials in any order [14, 15], two main obstacles should be overcome: (i) unavoidable impurities between layers; (ii) precise control of orientation in the stacking process [16−18]. In this context, the lateral heterostructures (LHS) have gained more and more attention. However, lattice mismatch in LHS between two individual components should be relatively small, and hence only a few 2D materials satisfy this condition. After great effort, some LHS have been successfully prepared, such as MoS2-WS2 [5], MoSe2-WSe2 [19], MoS2-MoSe2 [20], etc. The researches on LHS are mainly focused on the 2D semiconductor materials, however, the researches on LHS constructed with other materials such as topological insulators (TIs) are scarce. Topological insulators are new states of quantum matter which cannot be adiabatically connected to conventional insulators and semiconductors [21]. They possess the unique feature in which the bulk is a full insulating gap, while the edge or surface is gapless and is protected by time-reversal symmetry.

      Q2Te3 (Q = Bi, Sb), having a rhombohedral crystal structure with space group $D^5_{{\mathrm{3d}}} $ (R3m) [22, 23], is a layer topological insulators. Along z-direction, the unit cell contains five atomic layers with a stacking sequence of Te(1)-Q-Te(2)-Q-Te(1), which is known as a quintuple layer [23]. Within the quintuple layer unit, they are held together through strong covalent forces, however, quintuple layers are of van der Waal’s type with each other [22], so it tends to form 2D structure with a triangle or hexagonal shape (as shown in FIG. S1 of Supplementary materials, SM). The lattice mismatch between the Bi2Te3 (a=b=4.369 Å, c = 30.42 Å; α=β=90°, γ=120°) and Sb2Te3 (a = b = 4.264 Å, c = 30.458 Å; α=β=90°, γ=120°) is very small [24]. In detail, there is 2.4% lattice mismatch in a and b directions and 0.12% in c direction, indicating it is feasible to construct the LHS between them in theory [15, 23]. In fact, there are some progresses on heterostructure between Bi2Te3 and Sb2Te3, for example, Ju et al. have synthesized Bi2Te3-Sb2Te3 lateral heterojunction using a two-step solution method [24]; Guha et al. have grown Bi2Te3-Sb2Te3 lateral heterojunction using molecular beam epitaxy (MBE) [22]. These methods have some shortcomings, either they are too expensive or ther are susceptible to be contaminated, so it is imperative to seek for a general approach to synthesize LHS constructed with topological insulators, while vapor deposition process may be a feasible solution and is rarely reported. Moreover, the heterostructures based on topological insulators have received widespread attention in recent years due to the unique phenomena such as the quantum hall effect [25], spin polarization current [26], and superconductivity in topological insulators heterostructures [27] and so on. However, the research of the second harmonic generation (SHG) of LHS based on topological insulators materials is still rare.

      Herein, the water-assisted two-step rapid physical vapor deposition (rPVD) method was explored and used to synthesize Bi2Te3-Sb2Te3 LHS. The Bi2Te3-Sb2Te3 LHS exhibits large size, smooth surface, high crystallinity with a perfect orientations of 0° and 120°. In addition, a general growth strategy to synthesize LHS was present based on the water-assisted two-step rPVD developed here, and it was used to synthesize SnS-SnSe LHS and SnS-SnS lateral homostructures successfully. Furthermore, the Bi2Te3-Sb2Te3 LHS exhibits enhanced second-harmonic generation (SHG) as compared with the Bi2Te3/Sb2Te3 VHS.

    II.   EXPERIMENTS
    • The Bi2Te3 nanoplates were synthesized using the rPVD method developed in our previous reported Ref.[28]. The quartz boat containing 0.03 g Bi2Te3 powder (99.99%, Ourchem) was placed in the heating center of the tubular furnace, and a newly stripped mica sheet was placed in the downstream at 18–20 cm away. The air in the quartz tube was extracted by mechanical pump and washed using high-purity argon and hydrogen. Once the temperature reached at 550 °C, the quartz boat with precursor was moved to the heating center and kept for 15 min. 30 sccm argon was used as the carrier gas in the whole process, while 5 sccm hydrogen was introduced during the reaction. After the reaction, it was cooled down to the room temperature naturally.

    B.   Pretreatment of Bi2Te3 nanoplates
    • The mica synthesized Bi2Te3 nanoplates were kept in a sealed glass jar, and water vapor with a high concentration was produced and controlled by the humidity regulator. It was stored for 2 h and then used to grow Bi2Te3 in the next step.

    C.   Synthesis of Bi2Te3-Sb2Te3 LHS
    • The Bi2Te3-Sb2Te3 LHS were synthesized using the rPVD method again by using the Sb2Te3 powder (99.96%, Aladdin) as source and the Bi2Te3 nanoplates treated with water vapor shown above as substrate. The growth condition, such as temperature and carrier gas, are the same with Bi2Te3 except the growth time shorten to 10 min.

    D.   Material characterization
    • The morphologies and distribution of sample were characterized by optical microscopy (OM) (Olympus BX51M). The thickness was collected by use of atomic force microscope (AFM, Bruker Dimension Icon). Raman spectra were measured with a Raman analyzer (HORIBA Jobin Yvon Evolution, 532 nm). The second harmonic generation (SHG) was measured with Frequency multiplier (HORIBA, 1064 nm).

    III.   RESULTS AND DISCUSSION
    • We develop a water-assisted two-step rPVD method based on our previous report [28] to synthesize Bi2Te3-Sb2Te3 LHS. FIG. 1(a–d) exhibit the experimental diagram, the Bi or Te element’s absorption on the mica surface and then diffusion, condensation, nucleation (as shown in FIG. 1(a)). Simply put, the Bi2Te3 nanoplates were grown on mica substrate using the rPVD method with high purity Bi2Te3 powder as the precursor in step I (as shown in FIG. 1(b)). Then, the mica with the Bi2Te3 nanoplates was kept in sealed glass jars with a high water vapor concentration controlled by the humidity regulator (as shown in FIG. 1(c)) in step II. Later, the mica synthesized with the Bi2Te3 nanoplates and dealt with the high concentration of water vapor was used as the substrate to grow Sb2Te3 using the rPVD method again.

      The Sb2Te3 grew along the sides of the Bi2Te3 nanoplates with the assistance of water molecules absorbed along the interface between the Bi2Te3 nanoplates and mica, and then the Bi2Te3-Sb2Te3 LHS was obtained (as shown in FIG. 1(d)). FIG. 1(e) illustrates the optical microscopy (OM) image of the Bi2Te3 nanoplates, which shows that a large number of Bi2Te3 nanoplates distribute uniformly on the mica surface in a triangular shape. Interestingly, the Bi2Te3 nanoplates aligned in three major orientations at 120° to one another were clearly observed and the statistical data of the orientation distribution are illustrated in FIG. S2(b) (SM). The edges of these nanoplates are all along the directions of 0° and 120°, indicating the expitaxial growth mechanism between the Bi2Te3 nanoplates and the mica. The size of the Bi2Te3 nanoplates is very uniform with 12.5 μm in edge length and 6.0 nm in the thickness (characterized by the atomic force microscope (AFM), as shown in FIG. 1(f)).

      Three typical Raman peaks located at 68.5 cm−1, 103.4 cm−1, and 134.0 cm−1 are clearly observed (as shown in FIG. 1(g)), which correspond to the Raman modes of the ${\rm{A}}^1_{{\mathrm{1g}}}$, E2g, and ${\rm{A}}^1_{{\mathrm{2g}}}$ of Bi2Te3, indicating the high crystallinity of the Bi2Te3 nanoplates synthesized here. Then, the Sb2Te3 was synthesized around the Bi2Te3 nanoplates by the water-assisted two-step rPVD developed here with the mica grown Bi2Te3 nanoplates as substrate, and the Bi2Te3-Sb2Te3 LHS was obtained. FIG. 1(h) illustrates OM image of the Bi2Te3-Sb2Te3 LHS in situ growth on the Bi2Te3 nanoplates. The as-grown Bi2Te3-Sb2Te3 LHS all exhibit triangular shapes, which are very similar to that of the pre-synthesized Bi2Te3 nanoplates except for a noticeable triangles pit at the center. The edges of the triangles nanoplates are observed to be parallel to the edges of the central triangles pit, implying the Sb2Te3 expitaxial growth along the edge of the Bi2Te3 nanoplates. The growth rate, which is dependent on the temperature, gas flow rate, precursor and substrate in the deposition process, is feasible to be calculated using in-situ techniques shown here. Through careful statistics, the average edge length of the Bi2Te3 nanoplates is about 8.2 μm (shown in FIG. 1(f)), and the average edge length of Bi2Te3-Sb2Te3 LHS is extended to 12.5 μm (shown in FIG. 1(i)) after the water-assisted growth of rPVD in the second step; hence the lateral growth rate of the Sb2Te3 can be calculated, which is about 175.0 nm/min (FIG. S3 (a, b) in SM). In contrast to the ultrathin feature of the Bi2Te3 nanoplates (~6.0 nm), the thickness of the Sb2Te3 is very large, which is about 352.0 nm (as shown FIG. 1(i)). Then, the Raman spectroscopy was used to characterize the Bi2Te3-Sb2Te3 LHS. Three peaks located at 68.5 cm−1, 103.4 cm−1 and 134.0 cm−1 are observed in the inner, which are attributed to the ${\rm{A}}^1_{{\mathrm{1g}}}$, E2g, and ${\rm{A}}^1_{{\mathrm{2g}}}$ of Bi2Te3; meanwhile, three peaks located at 69.9 cm−1, 112.3 cm−1 and 166.7 cm−1 are observed in the outer, which are attributed to the ${\rm{A}}^1_{{\mathrm{1g}}}$, E2g, and ${\rm{A}}^1_{{\mathrm{2g}}}$of Sb2Te3. It is worth noting that all above Raman peaks of Bi2Te3 and Sb2Te3 in the heterostructures show no obvious shift from their pristine form, suggesting that each component in the heterostructures retain high crystallinity and do not cross contaminate during the growth process. Of particular interesting, the water molecule is found to play an important role in successful synthesis of Bi2Te3-Sb2Te3 LHS. If we grow Sb2Te3 in the second step in straightforward without dealing with water vapor, namely the conventional two step rPVD, there was no Bi2Te3-Sb2Te3 LHS obtained; instead, lots of the Bi2Te3/Sb2Te3 VHS were produced (as shown in FIG. S4 of SM). FIG. S4 in SM shows in situ characterization (AFM, OM and Raman) of the Bi2Te3 nanoplate before and after growth Sb2Te3 in the second step using the conventional two step rPVD method. Different from a noticeable triangles pit at the center in Bi2Te3-Sb2Te3 LHS, the surface of the Bi2Te3/Sb2Te3 VHS is very uniform and smooth except the shape changes from the equilateral triangle to the truncated triangle as shown in FIG. S4(d) (SM). In addition, the thickness reaches 950 nm in Bi2Te3/Sb2Te3 VHS as shown in FIG. S4(e), which is much larger than pristine Bi2Te3 nanoplates at ~5.9 nm. Furthermore, there is only Raman signal of Sb2Te3 and no Bi2Te3 is observed in FIG. S4(f) (SM), which may be attributed to the fact that Sb2Te3 is too thick and then the Raman signal of Bi2Te3 is masked, indicating the stacked growth feature in the conventional two step rPVD. Therefore, it can be concluded that the water molecule plays an important role in determining the growth direction of the heterostructures, whether vertical or lateral. And the Bi2Te3-Sb2Te3 LHS with large size, smooth surface and unique oriention were obtained using the water-assisted two-step rapid rPVD method developed here.

      Gaining insight into the growth mechanism of Bi2Te3-Sb2Te3 LHS will not only afford a superior guidance of controlling their morphology and composition but also synthesize other heterostructures or homostructures and eventually elevate this area of research to new heights. In this context, a growth diagram of LHS is present based on the results shown above. After the water molecule is absorbed on the edge of the Bi2Te3 nanoplates, the Sb or Te element is absorbed on the edges of the Bi2Te3 nanoplates with the assistance of water molecule, and then diffuses, condensates, nucleates and heteroepitaxially grows along the edges and eventually formed Bi2Te3-Sb2Te3 LHS. In this process, the water molecules are found to play a significant role, which is also observed in synthesizing other 2D materials or heterostructure. In detail, the water molecules will improve the growth rate and quality of the graphene [29], increase the lateral size of h-BN [30], and grow the WS2-MoS2 lateral heterostructure [31]. However, why is the Sb2Te3 preferentially grown along the sides of Bi2Te3 nanoplates instead of the other locations? This may be due to the different surface energy of Bi2Te3 nanoplate at different location. According to previously reported Ref.[32], the lateral surfaces of Bi2Te3 nanoplate should be $ (0 1\bar{4}) $, (015) and $ (1 0\bar{4}) $, instead of (100), (010) or (110) planes as shown in FIG. S5 (SM), because the surface energies of the $(0 1\bar{4}) $ (the surface energy is 0.92 J/m2) plane is much larger than that of the (100) (the surface energy is 0.63 J/m2) [32] or (110) (the surface energy is 0.21 J/m2) plane [33]. On the other hand, the surface of the mica sheet is chemical inert and the hanging bond on the Bi2Te3 nanoplate surface is very little [34], hence, the Sb and Te atoms are preferentially absorbed on the side and form a lateral epitaxial growth mode, and Bi2Te3-Sb2Te3 LHS are synthesized. The water molecule, an important additive in vapor deposition process, not only is compatible with 2D materials growth [35] but also accelerates lateral epitaxial growth on the edge, forming lateral heterostructures [31]. FIG. 2(e–h) displays an OM image of the Sb2Te3 epitaxial growth along the sides of the Bi2Te3 nanoplate with different growth period in the second rPVD process. A small amount of Sb2Te3 nucleation sites are observed at the edge of Bi2Te3 nanoplates after 5 min deposition. As the deposition time is extended to 8 min, the nucleation points at the edges of Bi2Te3 increase and gradually connect to form a “line", as shown in FIG. 2(g). When the growth time is extended to 10 min, Sb2Te3 forms a triangular border, and the outer edge of Bi2Te3 becomes encompassed by Sb2Te3, resulting in the formation of Bi2Te3-Sb2Te3 LHS as shown in FIG. 2(h). It can be seen that the Sb2Te3 epitaxially grows along the sides of Bi2Te3 gradually and then forms Bi2Te3-Sb2Te3 LHS, and these deposition processes help us to understand the growth mechanism and then produce perfect LHS with high controllability. Therefore, the method developed here with the assistance of water molecule is a novel approach to synthesize LHS, which may be used as a general strategy to grow the LHS and lateral homostructure and will provide a guidance for the lateral growth of other materials.

      To prove the global methodology of the water-assisted two-step rPVD method explored here, the SnS-SnSe LHS and SnS-SnS lateral homostructures were successfully produced, as shown in FIG. 3. Different from the high symmetry of the crystal structure of the Bi2Te3 and Sb2Te3 (rhombohedral), the symmetry of the crystal structure of the SnS and SnSe (orthorhombic) is much lower. Hence, the synthesis of the SnS-SnSe LHS and SnS-SnS lateral homostructures is much more difficult. Generally, SnS and SnSe exhibit rhombus shapes due to their orthorhombic structure as shown in FIG. S6 (SM). The SnS-SnSe LHS illustrates similar morphology to that of the pre-synthesized SnS nanoplates except for a noticeable rhombus pit at the center. The height of the SnSe (~385.0 nm) is much larger than that of the SnS (~10.0 nm) inside. Additionally, four Raman peaks at 95.0, 189.0, 218.0 and 161.0 cm−1 were observed in the inner, which were attributed to the phonon modes of ${\rm{A}}^1_{{\mathrm{g}}}$, ${\rm{A}}^2_{{\mathrm{g}}}$, ${\rm{A}}^3_{{\mathrm{g}}}$ and B3g of SnS [36]; while, in the outer, four Raman peaks positioned in 70.0, 102.0, 155.0, 150.0 cm−1, which correspond to the phonon modes of ${\rm{A}}^1_{{\mathrm{g}}}$, ${\rm{B}}^3_{{\mathrm{g}}}$, ${\rm{A}}^2_{{\mathrm{g}}}$, and ${\rm{A}}^3_{{\mathrm{g}}}$ of SnSe, were clearly evident. Raman spectroscopy clearly confirmed that the as-grown flakes are indeed SnS and SnSe, as shown in FIG. 3(c). Furthermore, the SnS-SnS lateral homostructures exhibit the similar morphology and structure with SnS-SnSe LHS, except different compositon (FIG. 3(d–f)). The results shown here may possibly indicate that the water-assisted two-step rPVD method is a general approach, which is able to extend to other system and produces a variety of lateral heterostructures and homostructures.

      Second harmonic generation (SHG) is a nonlinear optical effect that characterizes the symmetry properties and is used to understand nonlinear photophysical phenomena [37]. Its superior sensitivity and nondestructive testing features facilitate the investigation of the surface crystalline structure, surface charge and interface properties of materials without inducing any damage [38], for example, it is used to identify the layer number of 2D materials [39], lattice orientation [40] and the characterization of grain boundaries [41]. Generally, the SHG are from the non-centrosymmetric properties in conventional 2D materials; while, it can be used to characterize the surface state in topological insulators materials. Hence, the SHG may be a powerful tool to characterize LHS constructed with the topological insulators. FIG. 4 illustrates the SHG results of the Bi2Te3-Sb2Te3 LHS and Bi2Te3/Sb2Te3 VHS. Intriguingly, the SHG of the Bi2Te3-Sb2Te3 LHS exhibits excellent performance, not only surpassing Bi2Te3/Sb2Te3 VHS but also monolayer MoS2 (as witness). The intensity of the Bi2Te3-Sb2Te3 LHS is about 1.2 times higher than that of the monolayer MoS2 and twice higher than that of Bi2Te3/Sb2Te3 VHS, as displayed in FIG. 4(b). FIG. 4(c) presents the power-dependence of the SHG intensity in Bi2Te3-Sb2Te3 LHS under excitation at 1064 nm. With rising excitation power, an appreciable boost in the SHG peak is observed. To ascertain that the observed signals stemed from the SHG process, meticulous power-dependent measurements were executed on Bi2Te3-Sb2Te3 LHS. The scatter points represent the relationship between the SHG signal intensity of the tested Bi2Te3-Sb2Te3 LHS and the square value (P2) of the laser power incident on the sample surface, and the straight line represents the fitting curve in FIG. 4(d). It can be seen that there is a positive proportional relationship between the SHG intensity and P2, and the sample exhibits typical second-order behavior, indicating that the signal is generated by second-order nonlinear processes. Due to more defects in the interface and less symmetry in the Bi2Te3-Sb2Te3 LHS, Bi2Te3-Sb2Te3 LHS exhibits stronger SHG than Bi2Te3/Sb2Te3 VHS, indicating that lateral heterostructure plays a more interesting role than the vertical ones in the heterojunction physics of topological insulators, because in a topological insulator-based lateral heterostructure a new interface state is generated between two regions with well-maintained surface state in the same plane. The results are consistent with the previous report that the SHG intensity at the transition metal dichalcogenides (TMDs) LHS is enhanced because the SH emission from each material is coherently superimposed [42].

    IV.   CONCLUSION
    • In summary, Bi2Te3-Sb2Te3 LHS has been successfully synthesized on mica substrate using a water-assisted two step rPVD method. The Bi2Te3-Sb2Te3 LHS exhibits large size, smooth surface, and unique orientation. In addition, water molecule is crucial to the growth direction of the heterostructures, whether vertical or lateral. Then, a growth mechanism of LHS based on the water-assisted two-step rPVD is present, which can be used as a general strategy and extended to grow other 2D LHS or lateral homostructures, and SnS-SnSe LHS and SnS-SnS lateral homostructures have also been successfully synthesized. Bi2Te3-Sb2Te3 LHS exhibits stronger SHG than Bi2Te3/Sb2Te3VHS because a new interface state is generated between two well-maintained surface state regions in the same plane. The water-assisted two step rPVD approach explored here may be a general strategy to synthesize the varied types of LHS or lateral homostructures with high controllability and even enhanced SHG effect.

      Supplementary materials: FIG. S1 illustrates the crystal structure of Sb2Te3 and Bi2Te3; FIG. S2 exhibits the statistical data of the orientation distribution of Bi2Te3 nanoplates and Bi2Te3-Sb2Te3 LHS; FIG. S3 illustrates the growth rate of Bi2Te3-Sb2Te3 LHS; FIG. S4 exhibits the Bi2Te3/Sb2Te3 VHS synthesized using the conventional two-step PVD method; FIG. S5 exhibits the cryatal plane of the Bi2Te3 nanoplates; FIG. S6 exhibits the SnS and SnSe nanoplates deposition on mica.

    Figure (4)  Reference (42)

Catalog

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return