-
Dimethyl sulfoxide (DMSO), as one of poly-functional polar organic molecules, is widely used in many fields. In chemistry, it has excellent solvent properties and can dissolve a variety of organic substances such as carbohydrates, polymers, and peptides. In biology, DMSO is often used as a cryoprotectant agent to prevent living biological tissues from being damaged by freezing at low temperature preservation. In pharmaceutical and medicinal sciences, DMSO provides a new way of drug delivery due to its ability to penetrate cell membranes, causing drugs to dissolve in it to enter our body through the skin instead of injection. In addition to wide applications, DMSO has some unique properties. For example, it has a wide temperature range to keep liquid phase stable at ambient pressure since it transforms to the solid phase at 18.55 °C while it transforms to the gas phase at 189.0 °C. DMSO is described by an unusually high molar entropy of vaporization with 124 J·K−1·mol−1, which is higher than 107 J·K−1·mol−1 of water. These macroscopic peculiarities are closely related to the structure of DMSO at the molecular level.
DMSO (CH3SOCH3) molecule contains a polar S=O group and two nonpolar CH3 groups with a very high dipole moment of 3.96 D. Various experimental and theoretical methods have been devoted to the characterization of DMSO structure [1–7]. It is commonly accepted that molecular behavior of pure DMSO is governed by strong self-association via dipole-dipole and intermolecular interactions. Assessments of interactions between molecules in the condensed phase is a challenge. A proven efficient tool is vibrational spectroscopy due to high sensitivity of vibrational frequencies of specific functional group, allowing for analyzing molecular structures and intermolecular interactions through frequency shift and spectral intensity.
The S=O stretching vibration serves as a sensitive probe of DMSO under different environments. Although many vibrational spectroscopy studies on liquid DMSO have been reported, there is yet no consensus on the spectral assignment of the S=O stretch region, which brings confusion to understanding the microstructure of DMSO [8, 9]. According to the literature, the spectra of liquid DMSO in the S=O stretching region are complex, and three peaks at 1027, 1042 and 1055 cm−1 can be resolved, respectively. For the peak at 1027 cm−1, some literature assigned it to S=O vibration of linear dimers and polymers in liquid DMSO [1, 8], some literature assigned it to the rocking vibration of the methyl groups [6, 9–12], and the others attribute it to the out-of-phase S=O stretching vibration of the dimer [13]. For the bands at 1042 and 1055 cm−1, there is a general agreement that the antiparallel closed-ring dimer gives rise to these two components, which have been assigned to in-phase and out-of-phase S=O stretching vibrations [8, 11, 12]. Differently, some literature assigned the bands at 1042 and 1055 cm−1 to the S=O stretching of the dimer and free monomer [9, 13, 14], respectively. Therefore, it is important to establish a correct assignment for the spectra in the S=O stretching region at first.
For this end, we investigated the structure of liquid DMSO based on spectral assignment of S=O stretching spectra in extremely diluted solution and in pure liquid using temperature-dependent Raman spectroscopy combined with quantum chemistry calculations on DMSO clusters. Theoretical calculations and temperature dependence provide strong support for the assignment of experimental spectra.
-
DMSO and carbon tetrachloride (CCl4) were purchased from Guoyao company (99.5%). Both samples were dried over molecular sieve to remove the water. To achieve the desired molar fraction, the DMSO–CCl4 solutions were prepared by measuring the volume of DMSO and CCl4.
The instrument and setup parameters of Raman spectroscopy have been described previously [15]. In short, the output of 532 nm from Coherent Verdi-5 laser (5 W) was used as excitation light. Using a pair of quartz lenses whose focal length were 2.5 and 10 cm, respectively, Raman signals from the sample were collected in a 180° back-scattering configuration relative to the direction of incident laser. The collected Raman light was imaged onto the entrance of a triple monochromator (Acton Research, TriplePro) equipped with a liquid nitrogen cooled CCD array (Princeton Instruments, Spec-10:100B). Using a 2400 groove/mm grating, a spectral resolution of about 1.0 cm−1 was achieved. The precision of the measured wavenumber for Raman spectra was calibrated with Hg lamp to be about 0.01 cm−1. The final spectrum was averaged by 15 single scans and a typical exposure time was 2 s. To measure the variation of Raman spectra with temperature, the sample in the quartz cell was heated by a heating bath (THD-2006, Ningbo) whose temperature precision was estimated as 0.1 °C.
Gaussian 16 suite of program was employed for all calculations [16], including optimized geometry and harmonic vibrational frequency, and the energy of the (DMSO)n (n=1–4) clusters. The clusters are initially generated by semi-empirical PM7 method based on Molclus module of Multiwfn program [17], in which the obtained low-energy conformations were subsequently optimized under the density functional theory of B3LYP/6-311++G(d,p) level. The B3LYP/6-311 ++G(d,p) was chosen because it performed well in predicting vibrational frequency of organic molecules in the previous study [15]. The binding energy of the DMSO clusters was carried out by single-point energy calculated at MP2/aug-cc-pVTZ level with zero-energy correction at B3LYP/6-311++G(d,p) level.
-
It has been known that liquid DMSO is strongly self-associated by intermolecular interactions. The DMSO clusters are crucial to understand the aggregation process and spectral behavior [4, 5, 18-20]. FIG. 1 presents the optimized geometries of (DMSO)n (n=1–4) clusters calculated at B3LYP/6-311++G(d,p) level. For each n, only the clusters of the lowest energy are listed here while those clusters of higher energy are listed in Supplementary materials (SM) along with their Boltzmann factors, as shown in FIG. S1 (SM) and Table S1 (SM) . It can be seen that the lowest-energy conformer is dominant since their calculated Boltzmann factors are higher than 80% for the (DMSO)n (n=1–3) clusters and close to 60% for (DMSO)4. As seen from FIG. 1, both monomer and dimer have Cs symmetry. The dimer adopts an antiparallel configuration in terms of S=O bond due to dipole-dipole interaction, and weak C–H∙∙∙O hydrogen bonds between the O atom and the hydrogen atoms of CH3 groups also play a role in maintaining the stability. The calculated distance of H∙∙∙O in the dimer is 2.325 Å. For the trimer, three DMSO molecules form a closed cyclic configuration through C–H∙∙∙O hydrogen bonds and the distances of H∙∙∙O get reduced, ranging from 2.075 Å to 2.244 Å. However, in the larger tetramer, this H∙∙∙O distance gets elongated to 2.464 Å, indicating that intermolecular interaction is weakening with cluster size increasing.
Table I summarize the calculated vibrational frequencies and Raman activity of (DMSO)n (n=1–4) in the S=O stretching region along with experimental observations. For DMSO monomer, the frequency of CH3 antisymmetric rocking is calculated at 1025 cm−1 while the S=O stretching is at 1052 cm−1. Both of them are very close but Raman intensity of the latter is about 10 times stronger than the former according to the calculation. For the dimer, the S=O stretching vibration splits into two modes, namely in-phase and out-of-phase stretching vibration, which are calculated to be at 1028 and 1036 cm−1, respectively. The in-phase stretching vibration is highly symmetric with large Raman activity, whereas the out-of-phase stretching vibration is highly antisymmetric whose calculated Raman activity is close to 0. This is in good agreement with general case that in Raman measurement symmetric vibrational mode is strong whereas antisymmetric mode is weak. For the trimer, the calculated S=O stretching frequency is at 1022 cm−1, going on red-shifting compared to dimer and monomer. As for the tetramer, the calculated S=O stretching frequency is at 1025 cm−1 with a small blue-shift compared to the trimer, indicating the weakening of intermolecular interaction from n=4.
To establish an accurate link between the observed spectra of liquid DMSO and the corresponding vibrational modes, we firstly examine Raman spectrum of DMSO in extremely diluted CCl4 solution with a mole fraction of 0.001, as shown in FIG. 2, where the calculated spectrum in the gas phase is also plotted to be contrasted. It is known that CCl4 is a non-polar inert solution. It is expected that DMSO does not interact with DMSO molecules but it can dilute DMSO as much as possible. In such an extremely low concentration of 0.001, the DMSO should exist as a monomer and then spectral behavior can be directly compared with the calculated spectra in the gas phase. As seen from FIG. 2, the spectra of DMSO in the CCl4 solution exhibit two Raman bands at 1070 and 1008 cm−1, respectively, and their intensity ratio is about 30. By contrasting with the calculated spectra, the strong band at 1070 cm−1 can be assigned to the S=O stretching vibration while the weak band at 1008 cm−1 can be attributed to CH3 antisymmetric rocking. The assignment of 1008 cm−1 to CH3 antisymmetric rocking in CCl4 solution has resolved the conflict in assignments for the S=O stretching spectra of DMSO found in the literatures [6, 9−12]. It is evident that this band does not significantly interfere with the S=O band profile because of its low Raman intensity, as seen from FIG. 2. So, the contribution of CH3 antisymmetric rocking can be ignored in the analysis of liquid Raman spectra in the following.
FIG. 3(a) presents Raman spectrum of liquid DMSO at room temperature 20 °C. It can be seen that Raman profiles of liquid DMSO is broad and asymmetric and the wavenumber red-shifts compared to CCl4 solution due to polarization and weakening of the S=O bond. Decomposing this spectrum with three Voigt profiles, the peaks at 1055, 1042, and 1027 cm−1 can be found. These three decomposed peaks should correspond to different associated species in liquid DMSO such as monomer, dimer and trimer or larger clusters. It is known that pressure and temperature are effective means of altering molecular structure. Different from the pressure, high temperature destroys intermolecular interactions due to molecular thermal motion, causing larger cluster molecules to decompose into smaller clusters or even monomer. Therefore, the temperature-dependent Raman spectra can be employed to distinguish various spectral contributions.
FIG. 3(b) exhibits temperature-dependent Raman spectra of liquid DMSO at 5, 20 and 80 °C. The fitted individual peaks at 5 and 80 °C are shown in FIG. 3 (c) and (d). The fitted peak position and integral area as well as its percentage to total area are summarized in Table II. It is clear that there is an obvious temperature effect on the observed spectra. From 5 °C to 20 °C to 80 °C, the peak intensity at 1055 cm−1 increases from 24.1% to 25.3% to 36.0%, and that at 1042 cm−1 changes from 47.1% to 50.9% to 43.7%, and that at 1027 cm−1 decreases from 28.8% to 23.8% to 20.3%. That is to say, the structure corresponding to 1042 cm−1 is dominant. However, as the temperature increasing, the structure corresponding to 1042 and 1027 cm−1 are converting to that of 1055 cm−1. In addition, the fitted peaks at 80 °C slightly blue-shift because of weakening of intermolecular interactions at high temperature.
Combined with spectral behavior at different temperature and theoretical calculations on (DMSO)n (n=1–4) clusters, we assign the fitted peak at 1055 cm−1 to DMSO monomer in liquid state, the peak at 1042 cm−1 to the dimer, and the peak at 1027 cm−1 to the trimer or larger polymers. Considering that with cluster size increasing the intermolecular interactions in (DMSO)n (n=1–4) clusters are weakened starting from n=4 (Table I), we tend to assign the peak at 1027 cm−1 to the trimer. According to above assignment, liquid DMSO consists of a mixture of monomer, dimer and trimer. From FIG. 3 and Table II, it is clear that the dimer is dominant, suggesting that DMSO has a tendency to form an antiparallel configuration in the pure liquid state. This result is in good agreement with the X-ray and neutron diffraction experiments as well as the MD simulations that the local structure of DMSO was relatively unordered with a slight preference for antiparallel ordering of the S=O dipoles [21−24].
In previous studies, a pair of peaks at 1027 and 1042 cm−1 or a pair of peaks at 1042 and 1055 cm−1 have been assigned to in-phase and out-of-phase stretching vibration of DMSO dimer [8, 11-14]. Such assignments obviously contradict with our observations because the intensity of each fitted peak does not uniformly change with the temperature increasing. If two peaks come from the dimer at the same time, they should have a similar temperature response. From another perspective, according to the calculation, the out-of-phase S=O stretching vibrations should be very weak due to low symmetry, difficult to be observed in Raman spectra. So three decomposed bands cannot be attributed to the out-of-phase S=O stretching. In summary, temperature-dependent investigation and theoretical calculations provide strong support for the assignment of experimental spectra.
-
In this study, temperature-dependent Raman spectroscopy combined with quantum chemistry calculations was employed to achieve a molecular level description of structural properties of pure DMSO. Firstly, we examined the S=O stretching Raman spectra of DMSO in extremely diluted CCl4 solution with a mole fraction of 0.001, which clarify the confusion in previous assignment for CH3 antisymmetric rocking vibration. It was shown that the CH3 antisymmetric rocking did not significantly interfere with Raman spectra of DMSO because of its low Raman intensity. Secondly, we measured Raman spectra of liquid DMSO at different temperature, showing that three resolved peaks at 1027, 1042 and 1055 cm−1 exhibit obviously different variety upon the temperature increasing. Based on the analysis of temperature-dependent S=O stretching band and calculated DMSO clusters, the S=O stretching Raman spectra of DMSO were assigned and the presence of monomer, dimer and trimer in liquid DMSO was revealed. These results provide useful information on understanding molecular structure and intermolecular interaction in liquid DMSO.
Supplementary materials: FIG. S1 presents the calculated structures of (DMSO)n (n=2–4) clusters for the lowest-energy conformer and other conformers at B3LYP/6-311++G(d,p) level and Table S1 lists their binding energies and Boltzmann factors.
Structural Features of Liquid DMSO from Temperature-Dependent Raman Spectroscopy and Theoretical Calculations†
- Received Date: 25/08/2024
- Available Online: 27/12/2024
Abstract: Dimethyl sulfoxide (DMSO) plays an important role in chemistry, biology and industry. The S=O stretching vibration serves as a sensitive probe of its structure under different chemical environments. However, spectral assignment for the S=O stretching vibration of liquid DMSO remains unclear due to the interference of CH3 antisymmetric rocking and different aggregates, leading to the confusion in explaining the microstructures of liquid DMSO. Here, the S=O stretching spectra in pure DMSO and in extremely diluted CCl4 solution were investigated with temperature-dependent Raman spectroscopy. It is shown that CH3 antisymmetric rocking does not significantly interfere with the S=O band profile due to its low Raman intensity. Three decomposed peaks at 1027, 1042 and 1055 cm−1 in liquid DMSO show obviously different intensity variety upon the temperature increasing. Combined with quantum chemistry calculation on (DMSO)n (n=1–4) clusters, Raman spectra in the S=O stretching region were assigned and the simultaneous presence of the monomer, dimer and trimmer in liquid DMSO were concluded. These results contribute to a more detailed molecular understanding of the structure of DMSO in the liquid state.
首页
登录
注册


DownLoad: