-
Near infrared (NIR) emission in metal nanoclusters (NCs) has found wide applications in biosensing [1], bioimaging [2], and light emitting devices (LED) [3]. They have accurate structure, discrete energy levels, and tunable optical properties sensitive to size, structure and compositions [4−8]. The photoluminescence (PL for short) in metal NCs can originate from fluorescence, phosphorescence, and thermally activated delayed fluorescence (TADF) [9, 10]. Several strategies have been utilized to boost the NIR emission quantum yield (QY for short) of metal NCs including doping foreign atoms [11], ligand engineering [12−14], and solvent control [15]. Cu doping has been proven to be an effective method to enhance the emission of Au NCs. Song et al. reported the structure of AuCu14 with a high photoluminescence quantum yield (PLQY) in ambient solution [16]. Shi et al. reported the near-unity ( > 99%) PLQY and the excited-state dynamics of Au16Cu6 in degassed solution [7]. In addition, Au4Cu4 [17], Au6Cu6 [18], and Au2Cu6 [19] with high PLQY have also been reported.
To identify the origin of PL in these metal NCs and advance their applications, time-resolved emission and transient absorption spectroscopy (TAS) have been applied to probe their excited-state behaviors [20−23]. Zhou et al. assigned the visible and NIR emission of [Au25(SR)18] NCs to core−shell charge transfer state and the core state, respectively, using nanosecond TAS [24]. Jin and coworkers further confirmed that the NIR emission in Au25 NCs is phosphorescence [25]. By using organic dyes as triplet state acceptors, Mitsui and coworkers identified that the emissions in several metal NCs originate from the triplet state [17, 26, 27]. Recently, the Zhou group reported the triplet state energy transfer and triplet-triplet annihilation upconversion (TTA UC) behavior of Au16Cu6 and Au7Cu10 NCs, and relatively high efficiencies were achieved [28, 29]. Despite the great progress in the study of emission behavior in metal NCs, the detailed mechanism of triplet state energy exchange is still not fully understood, which hinders the further applications of these ultrasmall nanoparticles.
Compared to previously reported AuCu bimetallic nanoclusters including Au16Cu6, Au7Cu10, and Au4Cu4, the AuCu14 nanocluster exhibits unique structural characteristics, featuring a single gold atom core encapsulated within a rigid Cu(I) coordination cage. This distinct architecture is anticipated to significantly influence its excited-state dynamics. Initial experimental characterization by Song et al. (2021) revealed that AuCu14 maintains relatively high photoluminescence quantum yields in degassed solutions [16]. Subsequent theoretical investigations by the Pei group (2025) provided mechanistic insights into the luminescence origin of this nanocluster [30]. In this work, we reported the excited-state behavior of AuCu14 NCs by using time-resolved emission and absorption spectroscopy. We found that both PLQY and the excited-state lifetime of AuCu14 are very sensitive to oxygen. The excited-state lifetime of AuCu14 decreased by one order of magnitude from N2 to O2, which identified the triplet state origin of the emission. In addition, the temperature-dependent UV-Vis and PL spectra of AuCu14 only exhibited slight changes from room temperature to 77 K, indicating less participation of surface vibrations in the quenching of emission at room temperature. fs-TA experiments on AuCu14 confirmed ultrafast intersystem crossing and no additional excited-state processes before reaching the emissive excited-state. However, no quenching of emission was observed in the mixture of NCs and triplet state acceptors including perylene and anthracene, despite that they have suitable triple state energy levels compared to the nanocluster. The absence of molecular quenching of emission should be ascribed to the crowded surface molecular ligands, which significantly block electron exchange and prevent energy transfer between AuCu14 and organic molecules. These results provide useful insights into the triplet state dynamics of AuCu bimetallic NCs.
-
The synthesis of AuCu14 NCs followed the procedure reported previously [16]; the sample was dissolved in dichloromethane (DCM) for spectral experiments.
-
The steady state absorption and emission spectra of AuCu14 NCs under various conditions were measured using a Cary-60 (Agilent) absorption spectrometer and a Cary Eclipse (Agilent) fluorescence spectrometer, respectively. The fs-TA spectra were measured using a home-built femtosecond pump-probe set-up described elsewhere [31]. The ns-TA spectra were measured using a commercial spectrometer (Time-Tech Spectra). The time-resolved fluorescence decay profiles were recorded by a time-correlated single photon counting spectrometer (FluoTime 300, PicoQuant, Germany), excited by a 375 nm picosecond laser (PDL 820, PicoQuant diode laser). The low temperature spectroscopy was performed on thin films of nanoclusters using the cryogenic systems for low temperature experiments (Optistat DN-V, Oxford Instrument). The quantum yields were acquired on a Quantaurus-QY Plus UV-NIR absolute photoluminescence quantum yield spectrometer (C13534, HAMAMATSU, Japan) with excitation at 460 nm. Specifically, the PLQY was determined using an absolute measurement method. A dilute solution of AuCu14/DCM was prepared with an absorbance in the range of 0.1–0.3 at the excitation wavelength to minimize inner-filter effects and ensure optimal signal intensity. Prior to the sample measurement, a reference scan of pure DCM solvent was performed to calibrate the excitation source. The AuCu14/DCM sample was then placed at the center of the integrating sphere and excited at 460 nm. The emission spectrum was recorded, and the PLQY was automatically calculated by the instrument’s software based on the integrated photon counts of the emitted luminescence and the absorbed excitation light.
-
FIG. 1 (a) and (b) show the crystal structure of [AuCu14(TBBT)12(TFPP)6]+ (AuCu14 for short; counterion, SbF6−; TBBT, 4-tert-butylbenzenethiol; TFPP, tris(4-fluorophenyl)phosphine), which was reported by Song et al. in 2021 [16]. The metal core is composed of a body-centered cubic Au@Cu8, protected by six Cu(TBBT)2 units. The AuCu14 NCs contain two free electrons, which is less than typical metal NCs such as Au25(SR)18 [32]. FIG. 1(c) shows the UV-Vis absorption spectrum of AuCu14 dissolved in DCM and three prominent absorption peaks around 410 nm, 457 nm, and 515 nm can be clearly observed. The emission spectra of AuCu14 in oxygen, air, and nitrogen conditions are shown in FIG. 1(d). The emission peak remains unchanged at 630 nm in three conditions while the absolute PLQY in DCM dramatically drops from 65.3% in N2 to 17% in O2. The sharp decrease of PLQY in oxygen indicates that the emission in AuCu14 should arise from the triplet state.
To further understand the electronic structure of AuCu14 NCs, we performed temperature dependent absorption and emission spectra in PMMA thin films. FIG. 2(a) shows the UV-Vis absorption spectra measured between 300 and 77 K. Upon decreasing the temperature, all three absorption peaks in the visible region (410 nm, 457 nm, and 515 nm) experience a slight blueshift (FIG. 2(b)), and the absorption peaks experience slight narrowing and enhancement. In contrast to the steady state absorption, the PL spectra show a redshift as the temperature decreases and only a slight enhancement was observed (FIG. 2(c, d)). The blueshift of the absorption can be ascribed to the shrinking of the lattice at low temperatures, which increases the energy gap of the nanocluster [33]. On the other hand, the small redshift of the emission at low temperature indicates that the energy difference between the singlet state and the triplet state was slightly increased. The relatively small change of absorption and emission of AuCu14 NCs at low temperature suggests that electron-vibration coupling plays a minor role in their emission at room temperature.
Nanosecond transient absorption of AuCu14 under different conditions were further performed to understand the triplet state energy transfer dynamics. FIG. 3(a−c) show the ns-TA data map with excitation at 515 nm under O2-saturated, ambient conditions, and N2-purged environment. The TA spectra under all three conditions have similar spectral features, showing an excited-state absorption (ESA) peak at 490 nm, a broad ESA band between 550 nm and 750 nm, and a ground state bleaching (GSB) peak at 457 nm. In all three conditions, the ESA and GSB decay at the same time mono-exponentially, and no additional process was observed, which indicates that the ns-TA spectroscopy probed the dynamics of the final emissive state (FIG. 3(d, e)). One can clearly observe that the TA lifetime increases significantly from O2 to air to N2 conditions. It indicates that the excited-state lifetime is significantly shortened in the O2-saturated condition, which indicates triplet state energy transfer between AuCu14 and O2 in solution.
Time-resolved PL (time-correlated single photon counting) was further performed to probe the emission lifetimes of AuCu14 NCs under three conditions. The PL lifetime is significantly shortened from N2 to O2, indicating triplet energy transfer from AuCu14 to O2 (FIG. 4(a)). A very similar trend can be observed in the TA dynamics probed at the ESA band. The excited-state lifetimes obtained from both the PL lifetime and ns-TA measurements are summarized in FIG. 4(c). Both of the two time-resolved spectroscopies show very similar lifetimes in the three conditions, and the lifetime is shortened by one order of magnitude from N2 (around 2 µs) to O2 (200−300 ns).
Femtosecond TA spectroscopy was performed to understand the ultrafast dynamics of AuCu14 NCs. With 400 nm excitation, one can observe similar TA spectra to those in the ns-TA measurements (FIG. 5(a)). The ESA around 500 nm and 550 nm decays slightly in the first 3 ps, and the TA spectra remains unchanged between 3 ps and 2 ns, indicating no spectral evolution (FIG. 5(b, c)). With 515 nm excitation, the TA data map looks similar to that collected with 400 nm excitation, while the initial fast decay component disappears (FIG. 5(d−f)). Since the fast decay component disappears with near bandgap excitation, it should be assigned to the internal conversion from higher excited-states. In addition, since the final emissive state has been proven to be a triplet state, the intersystem crossing (ISC) process should be ultrafast, which is faster than the instrument response (80 fs).
This ultrafast ISC effectively prevents excited-state energy dissipation via non-radiative pathways for example internal conversion, thereby enabling efficient exciton population transfer to the long-lived triplet state T1. This mechanism is critical for achieving a high PLQY of 65.3% under anaerobic conditions. The ultrafast ISC kinetics of AuCu14 contrasts markedly with those of other Cu-based nanoclusters. In pure copper clusters such as ClCu14, the significantly weaker spin-orbit coupling (SOC) (ξCu (857 cm−1) < ξAu (5104 cm−1)) results in a substantially lower ISC efficiency compared to AuCu14 [16].
Triplet energy transfer (TET) between metal NCs and organic molecules has been widely reported and utilized to achieve photon upconversion [26]. To test the triplet energy transfer in AuCu14, we chose perylene and anthracene to probe the triplet state energy transfer dynamics. FIG. 6 (a) and (d) show the UV-Vis absorption of AuCu14 NCs, the two organic molecules, and the excited-state energy levels. Both perylene (1.53 eV) and anthracene (1.84 eV) have lower triplet state energies than that of AuCu14 (1.99 eV), which should facilitate the TET process. To eliminate the influence of oxygen in the system on the energy transfer process, the mixed system was purged with nitrogen (N2) for 5 min before the test. The experimental results showed that after the addition of perylene molecules, the luminescence lifetime of the cluster did not show a decreasing trend, which was highly consistent with the data of the control group without perylene molecules (FIG. 6(b, c). This result directly indicates that no effective triplet energy transfer occurred between the AuCu14 cluster and perylene molecules. To verify the universality, this study further constructed a mixed system of AuCu14 and anthracene molecules and conducted the same experiment (FIG. 6(e, f)). The results confirmed that there was also no detectable energy transfer between them.
The emissive state of AuCu14 has been proven to be the triplet state, thus it is helpful to discuss the possible reasons for the absence of TET from the cluster to the molecules. To make TET occur effectively, the following conditions should be met: (1) the triplet energy level of donor should be higher than that of the acceptor; (2) the total spin angular momentum should remain unchanged before and after TET; (3) the distance between donor and acceptor molecules should be close enough ( < 10 Å) so that the molecules should collide. From a theoretical perspective, the triplet energy transfer process between the AuCu14 cluster and perylene or anthracene molecules should occur spontaneously.
Based on the structure of AuCu14, the following factors should be taken into consideration when explaining the low TET efficiency. First, the steric hindrance effect of the surface ligands of the AuCu14 cluster is a key factor leading to slow TET. As shown in FIG. 1(a), the metal core of the AuCu14 cluster has a hierarchical structure. The gold atom is located at the center of the body-centered cubic crystal structure, surrounded by a cube unit composed of copper atoms. The outside of the cube is further surrounded by a layer of copper atoms in an octahedral structure. Second, a large number of organic ligands are distributed on the outermost periphery of the entire metal core, and the steric hindrance formed by these ligands significantly hinders the approach of energy-transferring molecules. The energy transfer of the AuCu14 should follow the Dexter electron exchange mechanism, which has strict requirements on the distance between the donor and the acceptor (usually ≤10 Å). Perylene and anthracene molecules need to form π-π stacking with the peripheral ligands of the cluster to shorten the intermolecular distance to meet the energy transfer conditions. Due to the excessive steric hindrance of the surface ligands of the AuCu14 cluster, the π-π stacking is difficult to form, and the distance between the donor and the acceptor cannot reach the critical value of the Dexter mechanism, ultimately resulting in the blocking of the energy transfer process. In contrast, triplet oxygen, with its small molecular volume, can break through the limitation of ligand steric hindrance and maintain an effective interaction distance with the cluster core, thus achieving efficient energy transfer. In addition, the inefficient TET can also be explained by the proportion and spatial distribution of gold atoms in the cluster. The low content of gold atoms in the cluster and the rigid structure composed of copper atoms may reduce the density of active sites for triplet energy transfer, indirectly affecting the energy transfer efficiency.
-
In summary, we report the excited-state relaxation dynamics of AuCu14 nanoclusters in solutions under different conditions by combining transient absorption and time-resolved emission spectroscopy. The PLQY decreases by 3.8 times and the excited-state lifetime decreases by one order of magnitude from saturated N2 to O2 conditions. Temperature-dependent absorption and emission spectroscopy measurements indicate that electron-vibration coupling only plays a minor role in the PL quenching. Femtosecond pump-probe spectroscopy has identified the ultrafast ISC process in AuCu14, which is consistent with the heavy-atom effect. In contrast to the strong PL quenching effect of O2, no significant TET was observed between AuCu14 NCs and organic molecules, which could be explained by the steric hindrance effect of the surface ligands. These results provide valuable insights for the future design of metal nanoclusters. First, constructing rigid coordination cages can physically isolate the emissive center, forming a hierarchical structure that reduces vibrational quenching and enhances exciton confinement. Second, doping with heavy atoms accelerates intersystem crossing by leveraging spin-orbit coupling while maintaining steric protection. Finally, the optimal ligand density must be achieved to balance steric shielding with functionality; under-coordinated surfaces increase non-radiative decay, whereas overcrowding impedes solvent accessibility.
Excited-State Dynamics of AuCu14 Bimetallic Nanoclusters†
- Received Date: 31/07/2025
- Available Online: 27/10/2025
-
Key words:
- Nanocluster /
- Ultrafast spectroscopy /
- Triplet energy transfer /
- Photoluminescence
Abstract: AuCu bimetallic nanoclusters exhibit enhanced emission relative to structurally analogous Au nanoclusters, though their excited-state dynamics remains incompletely characterized. Here, we chose AuCu14 as a system to probe the excited-state behaviors and triplet energy transfer dynamics of bimetallic nanoclusters. The O2 sensitivity of both photoluminescence quantum yield and excited-state lifetime confirms triplet-origin emission, while the minimal spectral changes at low temperature suggest weak electron-vibration coupling. Notably, although O2 induces significant photoluminescence quenching, the addition of triplet-state acceptors (perylene and anthracene) shows no quenching effect due to steric hindrance from surface ligands. These results advance the mechanistic understanding of triplet-state dynamics in AuCu bimetallic nanoclusters.
首页
登录
注册


DownLoad: