2024 Volume 33 Issue 7
Article Contents

Yu-Chen Hu, Liang-Bin Hu. Effect of the mixing of s-wave and chiral p-wave pairings on electrical shot noise properties of normal metal/superconductor tunnel junctions[J]. Chinese Physics B, 2024, 33(7): 077202. doi: 10.1088/1674-1056/ad498a
Citation: Yu-Chen Hu, Liang-Bin Hu. Effect of the mixing of s-wave and chiral p-wave pairings on electrical shot noise properties of normal metal/superconductor tunnel junctions[J]. Chinese Physics B, 2024, 33(7): 077202. doi: 10.1088/1674-1056/ad498a

Effect of the mixing of s-wave and chiral p-wave pairings on electrical shot noise properties of normal metal/superconductor tunnel junctions

  • Received Date: 28/12/2023
    Accepted Date: 20/04/2024
    Available Online: 01/07/2024
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Figures(3)

Article Metrics

Article views(289) PDF downloads(0) Cited by(0)

Access History

Effect of the mixing of s-wave and chiral p-wave pairings on electrical shot noise properties of normal metal/superconductor tunnel junctions

Abstract: We study theoretically the electrical shot noise properties of tunnel junctions between a normal metal and a superconductor with the mixture of singlet s-wave and chiral triplet p-wave pairing due to broken inversion symmetry. We investigate how the shot noise properties vary as the relative amplitude between the two parity components in the pairing potential is changed. It is demonstrated that some characteristics of the electrical shot noise properties of such tunnel junctions may depend sensitively on the relative amplitude between the two parity components in the pairing potential, and some significant changes may occur in the electrical shot noise properties when the relative amplitude between the two parity components is varied from the singlet s-wave pairing dominated regime to the chiral triplet p-wave pairing dominated regime. In the chiral triplet p-wave pairing dominated regime, the ratio of noise power to electric current is close to 2e both in the in-gap and in the out-gap region. In the singlet s-wave pairing dominated regime, the value of this ratio is close to 4e in the inner gap region but may reduce to about 2e in the outer gap region as the relative amplitude of the chiral triplet pairing component is increased. The variations of the differential shot noise with the bias voltage also exhibit some significantly different features in different regimes. Such different features can serve as useful diagnostic tools for the determination of the relative magnitude of the two parity components in the pairing potential.

1.   Introduction
  • The parity symmetry of Cooper pairs is a fundamental property of a superconducting phase. If there is no coupling between the electrons’ spin and orbital degrees of freedom, the wave function of a Cooper pair can be decomposed into the product of a spin part and an orbital part, then two types of parity symmetry can be classified for pairing states, namely spin-singlet pairing with orbital even-parity and spin-triplet pairing with orbital odd-parity.[1,2] This classification is valid in the absence of spin–orbit interaction but becomes invalid in the presence of strong spin–orbit coupling. For example, in some non-centrosymmetric superconductors[3–7] and in some proximity-induced superconducting phases developed in some low-dimensional semiconductor nanostructures[8–15] or topological insulator surfaces,[16–23] the broken inversion symmetry may not only lead to strong spin–orbit interaction but also cause the mixing of singlet s-wave and chiral triplet p-wave pairing. It is expected that some peculiar properties may occur due to the mixing of singlet and chiral triplet pairing, such as topologically protected zero-energy bound modes,[16–23] spin-polarized dissipationless charge current,[24,25] topological spin current,[26,27] magnetoelectric effects,[28,29]etc.

    When both singlet and chiral triplet pairing component coexist in the pairing potential, the determination of the relative magnitude of the two parity components is a fundamental issue since some properties of a superconducting phase may depend sensitively on it. Various schemes have been proposed for testing the structure of the parity-mixed pairing states.[30–36] Most of these schemes are based on the measurement of electrical transport properties of various types of junctions consisting of such superconducting phases, e.g., through the measurement of the tunneling spectroscopy. In a single-barrier tunnel junction between a normal metal and such a superconductor, the observation of a zero-bias anomaly in quasiparticle tunneling spectroscopy of certain directions is widely believed to be an indication of the presence of helical edge state of topologically non-trivial phase with dominant spin-triplet odd-parity pairing.[31] In addition, the helical states would carry spin currents which would be another indication for the topologically non-trivial state with dominant spin-triplet odd-parity pairing.[32] In a double-barrier tunnel junction consisting of such a superconductor sandwiched by two spin-polarized normal metals, some characteristics of crossed Andreev reflection between two interfaces can also serve as a diagnostic tool for the relative ratio of the singlet and the triplet component in the pairing potential.[33] Some other possible schemes were also proposed based on the measurement of some other types of electrical transport properties which may depend sensitively on the relative amplitude between the two parity components in the pairing potential.[34–36]

    In this paper we study theoretically the possibility of utilizing the measurement of electrical shot noise properties in tunnel junctions as a probe of the relative magnitude of singlet s-wave and chiral triplet p-wave pairing component in a superconducting phase with mixed parity due to broken inversion symmetry. The electrical shot noise originates from the time-dependent fluctuation of the electric current in electrical transport due to the discreteness of the charge of the carriers and remains as the only source of electrical noise in the zero-temperature limit. It is well known that the shot noise measurements in the zero-temperature limit can provide some valuable information on the transport process in a tunnel junction, which is not available through usual conductance measurements.[37–44] For instance, in tunnel junctions between normal metallic conductors with the carriers charged e, the process of electrical conductance can be modeled by a Poisson process in the absence of correlations among the carriers, then the ratio of noise power to electric current will equal to 2e in the zero-temperature limit for small bias voltage.[37] In contrast, in a low transmission tunnel junction between a normal metal and a conventional s-wave superconductor with singlet pairing, the value of this ratio will be doubled for small bias voltage due to the transport of Cooper pairs charged 2e, so some useful information on the charge and statistics of quasiparticles may be revealed through the measurement of electrical shot noise properties.[37–40] But it should be noted that, if singlet and chiral triplet pairing coexist in the superconducting region of a tunnel junction, the situations become somewhat different and the results may change substantially due to the Pauli repulsion between electrons with the same spin projections. Moreover, helical edge state may occur at the junction interface if the effect of chiral triplet pairing exceeds that of singlet pairing, which may also affect substantially the electrical shot noise properties of such a tunnel junction. In this paper, based on the Bogoliubov–de Gennes (BdG) equation and the extended Landauer–Büttiker scattering theory,[45] we investigate theoretically the characteristics of the electrical shot noise properties of tunnel junctions between a normal metal and such a superconductor where strong Rashba spin–orbit coupling and the mixture of singlet s-wave and chiral triplet p-wave pairing coexist. We investigate in some detail how the shot noise properties vary as the relative amplitude between the singlet s-wave and the chiral triplet p-wave component in the pairing potential is changed. It is demonstrated that some significant changes may occur in the electrical shot noise properties as the relative amplitude between the two parity components is varied. For instance, in the chiral triplet p-wave pairing dominated regime, the ratio of noise power to electric current is close to 2e both in the in-gap and in the out-gap region. In contrast, in the singlet s-wave pairing dominated regime, the value of this ratio is close to 4e in the inner gap region but may reduce to about 2e in the outer gap region as the relative amplitude of the chiral triplet pairing component is increased. The variations of the differential shot noise with the bias voltage also exhibit some significant differences in different regimes of the relative amplitude of the two parity components. The observation of such different features in the electrical shot noise properties can serve as useful diagnostic tools in the determination of the relative amplitude between the two parity components, in complement to usual diagnostic tools based on conductance measurements.

    The paper is organized as follows. In Section 2 we describe the theoretical model for the considered structure and introduce the theoretical formulation for the calculation of the electrical shot noise. In Section 3 we calculate numerically the electrical shot noise and investigate in some detail what changes may occur in the electrical shot noise properties as the relative magnitude of the two parity components in the pairing potential is varied. A summary is given in Section 4.

2.   Model and formulation
  • We consider a single-barrier planar tunnel junction lying in the x–y plane, where on the side of x < 0 is a normal metal and on the side of x > 0 is a superconductor where the mixture of singlet s-wave and chiral triplet p-wave pairing and strong Rashba spin–orbit coupling coexist due to broken inversion symmetry. The junction interface is located at x = 0 and is assumed to be perfectly flat and extends infinitely along the y direction. The voltage bias is along the x direction. In the normal metal region (x < 0), the electronic state is described by the following single-particle effective Hamiltonian: H0(k) = ħ2k2/(2m) – μ, where m is the electron effective mass, μ is the chemical potential, and k = (kx,ky) is the two-dimensional wave vector. In the superconducting region (x > 0), the quasiparticle excitation is described by the following BdG Hamiltonian:[2,3,6]

    where Δ^(k) is the pairing potential matrix, ξk = ħ2k2/(2m) – μ is the kinetic energy relative to the chemical potential μ, σx,y,z denotes the Pauli matrices in spin space, and λ denotes the strength of Rashba spin–orbit coupling. For simplicity, we assume the same electron effective mass m and chemical potential μ on both side of x < 0 and x > 0.

    In the presence of both singlet s-wave and chiral triplet p-wave pairing, the pairing potential Δ^(k) can be written as Δ^(k)=[d(k)⋅σ^]iσy+iΔS(k)σy, where ΔS(k) is the singlet component and d(k) the triplet component. We assume that the triplet component d(k) is aligned with the spin–orbit field, then the triplet component can be written as[7]

    where ΔP(k) is the amplitude of the triplet pairing component, x^ and y^ denote the unit vectors along the x and y directions, respectively. In the following we consider only the mean-field value of the amplitude ΔS(k) and ΔP(k) and neglect the dependences on wave vector k, i.e., setting ΔS(k) = ΔS and ΔP(k) = ΔP, with ΔS, ΔP ⩾ 0. In Nambu-spin space, the effective Hamiltonian describing the low energy excitation in the entire junction area can then be written in the following 4 × 4 matrix form:

    Here θ represents the angle between the direction of quasiparticles’ motion and the x axis, k± = kx ± iky = ke±iθ, Θ(x) is the Heaviside step function, and U(x) is the interface barrier potential. For simplicity, we assume a δ-type barrier potential U(x) = U0δ(x) at the junction interface, with U0 being the barrier strength.

    Since translational invariance is assumed along the y direction in the junction, the solutions of the BdG equation can be described by the general ansatz ψ(x)eikyy, where ky is the transverse component of the wave vector of a quasiparticle state and ψ(x) is the longitudinal solution of the BdG Hamiltonian for the effective one-dimensional scattering problem along the x direction, which can be constructed from the eigensolutions of the BdG Hamiltonian in each different regions of the junction. Then for an electron incident from the normal metal side with a transverse wave vector component ky and excitation energy E and spin σ, the scattering state in the normal metal region (x < 0) can be expressed as

    Here |σ〉e(h) represent the spinor functions of electrons (e) or holes (h) with spin-up (σ = +) or spin-down (σ = −) and |σ¯〉e(h) (σ¯=−σ) the spinor functions of the spin-flip states, which are defined respectively in the following: |+〉e = [1,0,0,0]T, |−〉e = [0,1,0,0]T, |+〉h = [0,0,1,0]T, and |−〉h = [0,0,0,1]T. The aσσ is the spin-conserving Andreev reflection coefficient and aσσ¯ is the spin-flip Andreev reflection coefficient. The bσσ is the spin-conserving normal reflection coefficient and bσσ¯ is the spin-flip normal reflection coefficient. kx(e,h) are the longitudinal wave vector components of quasiparticles and are determined by the transverse wave vector component ky and excitation energy E as follows: kx(e)=(2m/ħ2)(μ+E)−ky2, kx(h)=(2m/ħ2)(μ−E)−ky2.

    In the superconducting region (x > 0), the scattering state can be expressed as the linear combination of two electron-like and two hole-like right-moving eigenstates of the BdG Hamiltonian. Defining γ = sgn (ΔP – ΔS), the wavefunction of the scattering state in the superconducting region can then be expressed as

    where the first two terms on the right side of the equation represent two electronlike right-moving propagating modes with the longitudinal wave vector components q1(2)xe, the last two terms represent two holelike right-moving propagating modes with the longitudinal wave vector components q1(2)xh, c1(2) and d1(2) are the corresponding scattering coefficients. The coherence factors u1(2) and v1(2) are functions of the quasiparticle excitation energy E and are defined respectively by

    where Δ1 = ΔP + ΔS and Δ2 = |ΔS – ΔP|. The longitudinal wave vector components q1(2)xe(h) and the factors g1(2) and g∼1(2) are all functions of the quasiparticle excitation energy E and the transverse wave vector component ky. Among them, q1(2)xe(h) are related to E and ky by the following dispersion relation: E=(ξk±λ|k|)2+ΔP2+ΔS2, with k=(q1(2)xe(h),ky). From this dispersion relation, one gets

    where k1(2)xe=k1(2)2−ky2 for both |ky| < k1(2) and |ky| > k1(2), k1(2)xh=k1(2)2−ky2 for |ky| < k1(2) and k1(2)xh=−k1(2)2−ky2\ for |ky| > k1(2), with

    After q1(2)xe(h) are obtained as the functions of E and ky, the factors g1(2) and g∼1(2) as the functions of E and ky can be obtained as follows: g1(2)=(k1(2)xe−iky)/k1(2), g∼1(2)=−(k1(2)xh+iky)/k1(2).

    All the scattering coefficients in Eqs. (4) and (5) can be determined by the boundary conditions at the junction interface at x = 0, which read

    where V^x(N) is the x component of the velocity operator in the normal metal region and V^x(S) the x component of the velocity operator in the superconducting region, σ0 is the unit matrix in spin space and τz the Pauli matrix in particle–hole space. By solving Eqs. (10) and (11), for an incident electron with excitation energy E and incident angle θ (defined by ky = k sin θ), the normal and the Andreev reflection coefficients bσσ′ and aσσ′ in Eq. (4) can be obtained, which are functions of both E and θ. In the following we use Rσσ′e to denote the normal reflection probabilities of an incident electron with spin σ reflected to an electron with spin σ′, and use Rσσ′h to denote the Andreev reflection probabilities of an incident electron with spin σ reflected to a hole with spin σ′. In terms of the normal and the Andreev reflection coefficients bσσ′(E,θ) and aσσ′(E,θ), the normal and the Andreev reflection probabilities Rσσ′e and Rσσ′h of an incident electron with excitation energy E and spin σ and incident angle θ are given by

    which are also functions of both E and θ.

    After the normal and the Andreev reflection probabilities are obtained, the average electric current and the fluctuation around the average electric current (i.e., the electrical shot noise) can be obtained following the extended Landauer–Büttiker scattering theory.[37,38,45] In the zero-temperature limit, the average electric current at a bias voltage V is given by

    where G(E) is the differential tunneling conductance at zero-temperature, which can be expressed as an integration over the incident angle θ as follows:

    In the zero-temperature limit, the shot-noise power at a bias voltage V is given by

    where S(E) is the differential shot noise at zero-temperature, which can be expressed as an integration over the incident angle θ as follows:

    where sσ(E,θ) is given by the normal and the Andreev reflection probabilities as follows:

3.   Results and discussion
  • We now present the numerical results obtained based on the formulation outlined above, focusing on the variations of the shot noise properties with the changes of the relative amplitude between the singlet and the chiral triplet component of the pairing potential. Dimensionless parameters are used below. The barrier strength is defined by a dimensionless parameter Z ≡ 2mU0/(ħ2kF), with kF being the Fermi wave number. The strength of RSOI is defined by a dimensionless parameter α = 2mλ/(ħ2kF). The magnitude of the pairing potential is measured by chemical potential μ. We fix Δ ≡ ΔS + ΔP = 0.001μ in the calculations but vary the relative amplitude between ΔS and ΔP.

    In Fig. 1 we show the differential shot noise S (in units of 4e3/h) as a function of the bias voltage V (in units of Δ/e) for several different values of the relative amplitude between ΔS and ΔP. We consider three different regimes of interest: ΔS > ΔP, ΔS = ΔP, and ΔS < ΔP. The results shown in Figs. 1(a) and 1(b) correspond to the cases with ΔS ≥ ΔP and the cases with ΔS < ΔP, respectively. From the results shown in Figs. 1(a) and 1(b), we can see that the differential shot noise spectrums exhibit some significant differences in the three different regimes. Figure 1(a) shows that, if ΔP = 0 (the pairing is purely singlet), the differential shot noise spectrum exhibits only a single sharp peak at the bias voltage V = Δ/e. As the bias voltage is increased, the differential shot noise S increases monotonically in the in-gap region of V < Δ/e and decreases monotonically in the out-gap region of V > Δ/e. In contrast, if ΔP ≠ 0 but ΔP/ΔS < 1 (the singlet pairing is dominant), the differential shot noise spectrum exhibits two peaks. A sharp peak appears in the in-gap region of V < Δ/e and a small peak appears at V = Δ/e. Compared with the peak in the in-gap region, the height of the peak at V = Δ/e is greatly suppressed and decreases slowly with the increase of ΔP/ΔS. For the peak in the in-gap region, both its height and its position depend sensitively on the relative amplitude between ΔP and ΔS. As ΔP/ΔS is increased, the peak height decreases substantially and the peak position shifts gradually toward the direction of zero-bias voltage. When ΔP = ΔS, the peak in the in-gap region vanishes and the value of S increases sharply in the vicinity of zero-bias voltage. In this case, the variation of S with the bias voltage becomes rather smooth and rather small both in the in-gap region and in the out-gap region.

    If the triplet component is dominant in the pairing potential (ΔP > ΔS), helical Andreev bound state will be formed at the junction interface[6,31,32] and the effect of the Pauli repulsion also becomes much substantial. As a result, the characteristics of the variation of the shot noise with the bias voltage may become significantly different from that shown in Fig. 1(a). This fact can be seen from the results shown in Fig. 1(b). From Fig. 1(b) we can see that, when ΔS/ΔP = 0 (the pairing is purely triplet), the differential shot noise spectrum also exhibits a single sharp peak at V = Δ/e, but in the in-gap region of V < Δ/e, the variation of S with the bias voltage is non-monotonic and significantly different from the singlet pairing dominated cases shown in Fig. 1(a). As the bias voltage is increased from zero, the value of S first decreases monotonically and smoothly with the increase of V, and then turns to increase sharply as V approaches Δ/e. When ΔS/ΔP ≠ 0, the position of the sharp peak shifts into the in-gap region. On the low bias voltage side of the sharp peak in the in-gap region, the value of S first decreases monotonically and smoothly with the increase of V and then turns to increase sharply as V approaches the peak position, unlike the singlet pairing dominated cases shown in Fig. 1(a). A small and smooth peak may still occur at V = Δ/e, but the height is greatly suppressed. As the value of ΔS/ΔP is increased, the position of the peak in the in-gap region shifts gradually toward the direction of zero-bias voltage. When ΔS gets close to ΔP, the peak in the in-gap region vanishes, and the value of S drops sharply in the vicinity of zero-bias voltage, recovering the corresponding result shown in Fig. 1(a) for the ΔP = ΔS case.

    Another important quantity characterizing the shot noise properties of a single-barrier normal metal/superconductor tunnel junction is the ratio of noise power (P) to electric current (I). In Fig. 2 we show the ratio P/I (in unit of 2e) as a function of the bias voltage for several different values of the relative amplitude between ΔS and ΔP. Panels (a) and (b) in Fig. 2 correspond to the cases with ΔS ≥ ΔP and the cases with ΔS < ΔP, respectively. From the results shown in panels (a) and (b) in Fig. 2, we can see that the variations of the ratio P/I with the bias voltage also exhibit some qualitatively different features in the three different regimes of ΔS > ΔP, ΔS = ΔP, and ΔS < ΔP. Figure 2(a) shows that, when ΔP/ΔS = 0 (the pairing is purely singlet), the change curve of the ratio P/I with the bias voltage has a plateau area in the in-gap region of V < Δ/e. Within the plateau area, the value of P/I is about 4e and is little changed as the bias voltage is varied, indicating that the electric current is carried mainly by Cooper pairs in the in-gap region. In the out-gap region of V > Δ/e, the value of P/I reduces rapidly to about 2e (the classical Schottky value) as the bias voltage is increased, indicating that the electric current is carried mainly by single electrons in the out-gap region. When ΔP ≠ 0 but ΔP/ΔS < 1, the plateau area in the change curve of P/I with the bias voltage still exists in the inner gap region, but the width of the plateau area reduces substantially with the increase of ΔP/ΔS. The value of P/I is still about 4e in the plateau area. In the outer gap region beyond the plateau area, the value of P/I is intermediate between 4e and 2e, indicating that the electric current is carried partly by Cooper pairs and partly by single electrons in this bias voltage region. When ΔP/ΔS = 1, the plateau area vanishes and the change curve becomes nearly flat, with the value of P/I close to 2e in the whole bias voltage region. Compared with the ΔS > ΔP cases shown in Fig. 2(a), from Fig. 2(b) we can see that the variation of P/I with the bias voltage is rather small and smooth overall in the triplet pairing dominated cases. The value of P/I is slightly smaller than 2e in the vicinity of zero-bias voltage, and as V is increased from zero, the value of P/I first increases slowly to a maximum value of about 2e and then turns to decrease slightly. When ΔS/ΔP = 0, the maximum value of P/I occurs at V = Δ/e. With the increase of ΔS/ΔP, the position of the maximum value shifts gradually towards the direction of zero-bias voltage. Overall speaking, the value of P/I is close to 2e both in the in-gap region and in the out-gap region for ΔP ⩾ ΔS. In such cases, the electric current is carried mainly by single electrons instead of Cooper pairs even in the in-gap region.

    The results shown in Figs. 1 and 2 indicate that, in the vicinity of zero-bias voltage, both the differential shot noise and the ratio of noise power to electric current may exhibit sharp changes as the relative amplitude between ΔS and ΔP is varied from the ΔP < ΔS regime to the ΔP > ΔS regime. This fact is more clearly illustrated in Fig. 3. Figure 3(a) shows the change of the differential shot noise S0 at zero-bias voltage with the variation of ΔP/ΔS for the barrier strength Z = 2, 3, 4. From Fig. 3(a) we can see that, both in the ΔP < ΔS regime and in the ΔP > ΔS regime, the value of S0 is almost little affected by the variation of the relative amplitude between ΔP and ΔS, but in the vicinity of ΔP/ΔS = 1, a sharp increase in the value of S0 occurs as the relative amplitude between ΔP and ΔS is varied from the ΔP < ΔS regime to the ΔP > ΔS regime. In the vicinity of zero-bias voltage, the value of the ratio of noise power to electric current can be given by the value of S0/G0, where G0 is the charge conductivity at zero-bias voltage. Figure 3(b) shows the change of S0/G0 with the variation of ΔP/ΔS for the barrier strength Z = 3, 4, 5. From Fig. 3(b) we can see that, both in the ΔP < ΔS regime and in the ΔP > ΔS regime, the value of S0/G0 is also little affected by the variation of the relative amplitude between ΔP and ΔS, but in the vicinity of ΔP/ΔS = 1, a sharp decrease in the value of S0/G0 occurs as the relative amplitude between ΔP and ΔS is varied from the ΔP < ΔS regime to the ΔP > ΔS regime. Though the value of S0 may be affected substantially by the variation of the barrier strength (as seen from Fig. 3(a)), the value of S0/G0 is only slightly affected by the variation of the barrier strength in both regimes of ΔP < ΔS, and ΔP > ΔS, which is about 4e for ΔP < ΔS and slightly smaller than 2e for ΔP > ΔS. From theoretical point of view, such sharp changes are due to two factors. The first is that the effect of the Pauli repulsion becomes much substantial if the triplet component is dominant in the pairing potential. Due to this effect, the electric current will be carried mainly by single electrons instead of Cooper pairs even in the vicinity of zero-bias voltage. The second is that helical Andreev bound state will be formed at the junction interface if ΔP > ΔS, which disappears for ΔP < ΔS. This is a quantum phase transition,[6,16–18] with the critical point ΔP = ΔS.

4.   Summary
  • In summary, we have presented a theoretical investigation on the electrical shot noise properties of tunnel junctions between a normal metal and a superconductor where the mixing of singlet s-wave and chiral triplet p-wave pairing and strong Rashba spin–orbit coupling coexist due to broken inversion symmetry. The variations of the shot noise properties with the changes of the relative amplitude between the two parity components are examined in some detail. It is shown that both the variations of the differential shot noise and the variations of the ratio of noise power to electric current with the bias voltage may exhibit some significantly different features in the different regimes of ΔS > ΔP, ΔS = ΔP, and ΔS < ΔP. In the ΔP⩾ ΔS regime, the ratio of noise power to electric current is close to 2e both in the in-gap and in the out-gap region. In the ΔS > ΔP regime, the value of this ratio is close to 4e in the inner gap region but may reduce to about 2e in the outer gap region as the relative amplitude of the chiral triplet pairing component is increased. The differential shot noise spectrums also exhibit some significant differences in different regimes of the relative amplitude between the two parity components. For instance, on the low bias voltage side of the sharp peak in the differential shot noise spectrum, the variation of the differential shot noise with the bias voltage is monotonic if ΔS > ΔP but non-monotonic if ΔP > ΔS. The observation of such different features can provide some valuable information on the relative magnitude of the two parity components in the pairing potential. For instance, by measuring the ratio of noise power to electric current in the vicinity of zero-bias voltage, whether the singlet pairing or the triplet pairing component is dominant in the pairing potential can be inferred, and through the analysis of the peak structure in the differential shot noise spectrum, the relative amplitude between the two parity components can be estimated. This would serve as useful diagnostic tools for the determination of the relative magnitude of the two parity components, in complement to usual diagnostic tools based on conductance measurement. Finally, it should be pointed out that the results obtained in the present work are based on a simplified theoretical model where some important effects that may affect the electrical shot noise properties are not included, e.g., the Zeeman effect or the effect of other types of spin–orbit coupling. If the influences of such effects are included in the model, some features of the electrical shot noise properties may be altered substantially. The influences of such effects will be investigated in the future.

Figure (3)  Reference (45)

Catalog

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return