2025 Volume 34 Issue 3
Article Contents

Zhuangzhuang Qu, Zhihao Chen, Xiangyan Han, Zhiyu Wang, Zhuoxian Li, Qianling Liu, Wenjun Zhao, Kenji Watanabe, Takashi Taniguchi, Zhi-Gang Cheng, Zizhao Gan, Jianming Lu. Anomalous Hall effect in Bernal tetralayer graphene enhanced by spin–orbit interaction[J]. Chinese Physics B, 2025, 34(3): 037201. doi: 10.1088/1674-1056/adb411
Citation: Zhuangzhuang Qu, Zhihao Chen, Xiangyan Han, Zhiyu Wang, Zhuoxian Li, Qianling Liu, Wenjun Zhao, Kenji Watanabe, Takashi Taniguchi, Zhi-Gang Cheng, Zizhao Gan, Jianming Lu. Anomalous Hall effect in Bernal tetralayer graphene enhanced by spin–orbit interaction[J]. Chinese Physics B, 2025, 34(3): 037201. doi: 10.1088/1674-1056/adb411

Anomalous Hall effect in Bernal tetralayer graphene enhanced by spin–orbit interaction

  • Received Date: 22/01/2025
    Accepted Date: 05/02/2025
    Available Online: 01/03/2025
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Figures(5)

Article Metrics

Article views(255) PDF downloads(0) Cited by(0)

Access History

Anomalous Hall effect in Bernal tetralayer graphene enhanced by spin–orbit interaction

Abstract: Spin–orbit interaction (SOI) can be introduced by the proximity effect to modulate the electronic properties of graphene-based heterostructures. In this work, we stack trilayer WSe2 on Bernal tetralayer graphene to investigate the influence of SOI on the anomalous Hall effect (AHE). In this structurally asymmetric device, by comparing the magnitude of AHE at positive and negative displacement fields, we find that AHE is strongly enhanced by bringing electrons in proximity to the WSe2 layer. Meanwhile, the enhanced AHE signal persists up to 80 K, providing important routes for topological device applications at high temperatures.

1.   Introduction
  • Intrinsic anomalous Hall effect (AHE) in graphene systems relies on the breaking of valley symmetry, which brings in finite Berry curvature in the momentum space. While a pristine graphene itself has spin-and-valley four-fold degeneracies, strong electronic interaction or spin–orbit interaction (SOI) has been routinely utilized to break the valley symmetry. For the electronic interaction, it can be brought in by flatting the band dispersion via twist engineering[1,2] and/or applying perpendicular displacement fields (D) in a rhombohedral/Bernal multilayer graphene.[3–9] For the latter, proximity to transition metal dichalcogenides (TMDs), whose SOI is in the order of 100 meV, effectively induces SOI into graphene, leading to weak antilocalization[10–19] and (quantized) anomalous Hall effect.[20–22] In rhombohedral trilayer/tetralayer graphene, both electronic interaction and SOI have been applied to observe the enhancement of critical temperature and the topological nature of superconductivity.[23–25]

    As a highly tunable quantum platform, Bernal tetralayer graphene (BTG) has been widely studied.[26–33] In particular, AHE was found in BTG and surprisingly survived up to 70 K, which was ascribed to spontaneous breaking of the valley degeneracy.[9] It would be interesting to examine whether the phenomenon can survive above liquid nitrogen temperature by further involving SOI. In this work, trilayer WSe2 is placed under the bottom surface of BTG to introduce SOI. We find that the magnitude of AHE in BTG is greatly enhanced by bringing electrons closer to the WSe2 layer via a negative D. The asymmetric dependence of AHE on positive and negative D directly proves the important role of SOI in observing AHE. Naturally, the critical temperature of this enhanced AHE can be increased to 80 K.

2.   Methods
  • Figure 1(a) shows the optical image and measurement schematic of the device. The number of layers is distinguished by optical contrast[34] and the stacking order of the tetralayer graphene is identified by Raman spectroscopy.[35] The thicknesses of top and bottom hBN are 22 nm and 16 nm, respectively. Trilayer rather than monolayer WSe2 is chosen, because it is more mechanically robust during manual stacking and easier to obtain through mechanical exfoliation. Note that the thickness of WSe2 is not an important parameter to introduce SOI into graphene.[20,36–38] The twist angle between WSe2 and graphene is around 15°. The device is fabricated via the standard dry transfer methods.[39,40] Thick graphite layers are used as top and bottom gate electrodes to control the carrier concentration n = (CbgVbg+CtgVtg)/e and the displacement field D = (CbgVbg–CtgVtg)/2ε0. Here, Ctg(bg), Vtg(bg), e, ε0 donate top (bottom) geometric capacitance, top (bottom) gate voltages, elementary charge, vacuum permittivity, respectively. The resistance is measured in the Oxford Teslatron system using standard lock-in techniques.

3.   Results and analysis
  • Depending on the device structure and the defined direction of displacement field in Fig. 1(a), the carrier distribution of conduction (valence) band in the D–n diagram is schematically shown in Fig. 1(b). For an ideal layer-polarization system like Bernal bilayer graphene or rhombohedral multilayer graphene, under a positive displacement field, electrons will have a lower potential energy at the bottom surface, thus the valence band is locked with the bottom surface and the conduction band is locked with the top surface. General speaking, the low-energy band structure of BTG can be considered as two sets of bilayer graphene-like bands with interaction.[26] In BTG, layer polarization is far from being ideal, nevertheless, we can still draw a similar conclusion about the relationship between the spatial distribution of carriers and the displacement field. In our asymmetric device, as electrons (holes) approach WSe2 in the case of a negative (positive) D and a positive (negative) n (Fig. 1(b)), the proximity effect becomes more pronounced and we expect to gain a substantial SOI in BTG. Figure 1(c) shows the longitudinal resistance Rxx map diagram at 300 mK, where a resistance minimum at the charge neutrality point with D = 0 and tunable multi-resistance peaks associated with Lifshitz transitions are clearly observed. These remarkable features are consistent with the previously reported transport characteristics of BTG, indicating the high quality of our device.[9,29]

    In order to systematically explore the influence of SOI on AHE, we select some points with the same n and opposite D on the electron side, where the AHE signal has been observed to be more pronounced than that on the hole side,[9] to obtain Hall resistance Rxy. By using the formula[41]Rxy(B) = ηB + RAH, η = 1/(ne), where η is the linear Hall coefficient, and RAH is the anomalous Hall resistance, Rxy is decomposed into a linear part and an anomalous part. The extracted RAH at different points (n, D) are shown in Fig. 2. Overall, RAH increases and then saturates at ∼ 0.03 T. We denote the difference between the saturated RAH plateaus formed in positive and negative magnetic fields as ΔRAH to characterize the intensity of the AHE (Fig. 2(b)). It shows a significant dependence on the signs of displacement field: ΔRAH(−D) > ΔRAH(+D). As shown in the inset of Fig. 2(a), when D > 0 for which electrons are farther away from WSe2, a weakened AHE is observed. In contrast, when D < 0, electrons are closer to WSe2 and the AHE is enhanced.

    The enhancement of AHE by pushing carriers in proximity to WSe2 is found to be effective over a large range of carrier density. In Fig. 3, we fix D and change n to examine the variance of RAH. Both at D = ±0.3 V/nm and ±0.4 V/nm, ΔRAH becomes smaller with the increasing n, indicating that AHE is more significant in the low carrier region.[9] This is reasonable, since the symmetry breaking of spin and valley degrees is most significant at low carrier densities.[3,8] The increase of n weakens the symmetry-breaking effect, and then the Berry curvature is washed out, so is AHE. For electrons moves away from WSe2 under a positive D, ΔRAH decays quickly. However, when D is negative, significant SOI is introduced into BTG, resulting in considerable ΔRAH even in the high carrier region (Figs. 3(c) and 3(f)). In brief, SOI expands the significant AHE to a larger carrier density.

    Besides the extended carrier range, the working temperature of AHE is observed to be significantly enhanced. Here, we select the two typical points (D = ±0.4 V/nm and n = 0.05 × 1012 cm−2) which exhibit the largest ΔRAH at 300 mK, and conduct the variable-temperature Hall resistance measurement (Fig. 4). At all temperatures, we find that ΔRAH(−D) > ΔRAH(+D), which, again, confirms the influence of the introduced SOI on AHE. As temperature rises, thermal fluctuation suppresses the electron–electron interaction, leading to a weakened symmetry breaking effect that ultimately destroys AHE. The introduction of SOI counteracts this negative effect of temperature. In Fig. 4(i), the enhanced ΔRAH can still be observed at 80 K, higher than liquid nitrogen temperature and the reported 70 K in the literatures.[9] This is of great significance for the application of AHE in high temperature quantum devices.[1–3,21,22]

    In the end, we summarize the enhancement of ΔRAH as a function of displacement field (Fig. 5(a)), carrier density (Fig. 5(b)) and temperature (Fig. 5(c)). As can be seen, the introduced SOI does not change the original dependences of AHE on various physical parameters: it would also be enhanced by a large D, but suppressed by a large n, and a non-monotonic relationship with temperature, which are consistent with previous observation.[9] However, the magnitude of AHE is universally promoted, regardless the varied physical parameters.

4.   Conclusion
  • In this work, we fabricate high-quality Bernal tetralayer graphene–trilayer WSe2 device to investigate the influence of spin–orbit coupling on anomalous Hall effect. Given that the WSe2 layer rests on one side of the tetralayer graphene, the structural asymmetry renders the AHE highly sensitive to the positive and negative signs of displacement field. Specifically, AHE intensifies when the carriers approach the WSe2 layer and is weakened otherwise. Furthermore, the enhanced AHE persists to a large range of carrier density and, more importantly, a working temperature up to 80 K, offering a promising route for achieving high-temperature topological devices.

Figure (5)  Reference (41)

Catalog

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return