2025 Volume 34 Issue 8
Article Contents

Xiao Ma, Tao Wang, Jianfeng Wen, Zhenwei Zhou, Hongyu Zhu. First-principles study on structural, electronic, and superconducting properties of Laves-phase alloy HfZn2 under pressure[J]. Chinese Physics B, 2025, 34(8): 086108. doi: 10.1088/1674-1056/ade5a1
Citation: Xiao Ma, Tao Wang, Jianfeng Wen, Zhenwei Zhou, Hongyu Zhu. First-principles study on structural, electronic, and superconducting properties of Laves-phase alloy HfZn2 under pressure[J]. Chinese Physics B, 2025, 34(8): 086108. doi: 10.1088/1674-1056/ade5a1

First-principles study on structural, electronic, and superconducting properties of Laves-phase alloy HfZn2 under pressure

  • Received Date: 30/05/2025
    Accepted Date: 13/06/2025
    Available Online: 01/08/2025
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Figures(6)  /  Tables(2)

Article Metrics

Article views(291) PDF downloads(0) Cited by(0)

Access History

First-principles study on structural, electronic, and superconducting properties of Laves-phase alloy HfZn2 under pressure

Abstract: Laves-phase are among the most abundant groups of alloys with chemical formula AB2, known for their high-temperature strength and potential application in hydrogen storage. The Laves-phase generally acts as a strengthening agent, which enhances the strength and durability of alloys at extreme conditions. Consequently, the properties of Laves-phase alloys at extreme conditions attract wide attention. In this study, we investigated the high-pressure phase diagram of Laves-phase alloy HfZn2, and discovered a phase transition from C15 (space group Fd3¯m) phase to C14 (space group P63/mmc) phase at a pressure above 20 GPa. Based on ab initio simulations, the mechanical, chemical bonding and superconducting properties of high-pressure phase HfZn2 were predicted. The ratio of bulk modulus to shear modulus (B/G), a key indicator of mechanical properties in alloys, increases from 1.86 to 4.09 within the pressure range of 50–250 GPa, indicating excellent ductility of the C14 phase of HfZn2 under high pressure. Additionally, Zn gains approximately 0.43 electron from Hf at 10 GPa, and the superconducting critical temperature of HfZn2 is estimated to be around 0.55 K at 50 GPa. Given that both C14 and C15 phases are common structures in Laves-phase alloys, elucidating the high-pressure behaviors of C14 and C15 phases of HfZn2 will enhance the fundamental understanding of properties and potential applications at extreme conditions of Laves-phase alloys.

1.   Introduction
  • Laves-phase intermetallic compounds, formed by main group metallic elements and transition metals, exhibit a variety of crystal structures, including the cubic C15 (MgCu2) structure, hexagonal C14 (MgZn2) structure, or dihexagonal C36 (MgNi2) structure. These compounds have recently garnered renewed interest within the technological and scientific communities due to their intriguing properties and potential applications.[1,2] For instance, Laves-phase ZrX2 (X = V, Cr, Mn, Fe, Co, Ni) and C14-type ZrMn2H3 compounds are promising candidate materials for hydrogen storage.[3] The cubic Laves compound ZrZn2 was studied both experimentally and theoretically, with superconducting critical temperature Tc ≈ 1 K.[4] Moreover, the elastic constants of some Laves-phase compounds have been studied by a number of theoretical investigations. For example, the elastic properties of C15 Laves-phases HfV2, ZrV2, and HfxZr1−xV2 exhibit an anomalous temperature dependence.[5] Similarly, the cubic Laves-phase materials Hf25V60Nb15, TaV2, TaV2H(D)x, and ZrCr2 also show anomalous elastic properties.[6] Due to the potential application of Laves-phase alloys at extreme conditions, the mechanical properties of Laves-phase alloys at pressure attract wide interest.

    Up to now, the C15 Laves-phase structure of HfZn2 has widely attracted both experimental and theoretical attention.[7,8] The elastic and thermodynamic properties of HfZn2 were studied, and the results demonstrate good agreement with experimental data.[7] The optical properties of HfZn2 were investigated, which show that it is a good coating material with high reflectivity up to 16 eV in the visible-ultraviolet region.[9] In 2017, the superconductivity of HfZn2 was reported with superconducting critical temperature Tc ≈ 0.05 K. A recent work reported the structural, elastic, electronic, vibrational and thermodynamic properties of C15 HfZn2 up to 100 GPa.[10] However, the information on phase transitions, electronic properties, chemical bonding, dynamical properties and superconductivity of HfZn2 under pressure is absent. Therefore, great attention is needed to explore the high-pressure structures and properties of HfZn2. Such studies would not only enhance our fundamental understanding of this material but also potentially unlock new applications in extreme environments.

    In this work, we discovered a new C14 Laves-phase HfZn2 with the space group P63/mmc in the pressure range 20–275 GPa. We investigated the mechanical, chemical bonding and superconducting properties of the new high-pressure phase of HfZn2 based on ab initio simulations. According to the Pugh criterion, the C14 Laves-phase HfZn2 was identified with high ductility. Zn gains electrons from Hf in the C14 Laves-phase HfZn2 crystal. And HfZn2 was predicted to be a superconductor with a critical temperature of about 0.55 K under pressures. Our results provide a theoretical perspective for understanding the properties of HfZn2 under extreme conditions.

2.   Computational methods
  • The crystal structure prediction for HfZn2 was performed at the pressure range of 0–300 GPa with 1–4 formula units, through the CALYPSO and USPEX codes.[11,12] Such methods have been manifested by successfully employed in high-pressure phases of various systems.[13] The structural relaxations and electronic structure calculations were carried out by using the first-principles method through the Vienna ab initio simulation package (VASP) codes.[14–16] PBE (Perdew–Burke–Ernzerhof)[17] in generalized gradient approximation (GGA) was used as the exchange–correlation functional. The 5d26s2 for Hf and 3d104s2 for Zn were considered as valence electrons, respectively. To obtain an accurate result, the energy cutoff was set to 600 eV, and the Brillouin-zone sampling mesh for the Monkhorst–Pack k-point was used 2π × 0.025 Å−1. The phonon dispersion of the thermodynamically stable structures was calculated to confirm the dynamic stability by using a supercell approach as implemented in the Phonopy code.[18] The electron–phonon coupling (EPC) calculations were implemented by using the Quantum ESPRESSO[19] package with a 90 Ry kinetic energy cutoff and a 360 Ry charge density cutoff. For Fd3¯m phase, a 16 × 16 × 16 k-point grid was used for Brillouin zone integration in electronic calculations and EPC matrix elements were calculated in a 4 × 4 × 4 q-point grid. For P63/mmc phase, a 12 × 12 × 8 k-point grid was used for Brillouin zone integration in electronic calculations and EPC matrix elements were calculated in a 3 × 3 × 2 q-point grid.

3.   Results and discussion
  • The crystal structures were predicted to exhibit the Fd3¯m, P63/mmc, and P21/m space groups within the pressure range of 0–300 GPa. Figure 1(a) illustrates the calculated enthalpies of the predicted structures relative to the enthalpy of Fd3¯m phase as a function of pressure. The Fd3¯m phase has the lowest enthalpy among all other candidates from 0 to 20 GPa, indicating it is the thermodynamic ground state. Upon compression, a hexagonal structure becomes more thermodynamically favored up to 275 GPa. Beyond this pressure, it decomposes to the elements Hf and Zn. The crystal structures of Fd3¯m and P63/mmc phases are depicted in Figs. 2(a) and 2(b), respectively. At ambient pressure, we obtain the cubic C15 structure with space group Fd3¯m, which is in good agreement with previous studies.[7,8] Interestingly, we observe a hexagonal structure with P63/mmc space group at 100 GPa, in which the occupations of Hf and Zn are the same as that in C14 phase of MgZn2. Hf atoms occupy 4f and Zn atoms occupy 2a and 6h, indicating this structure belongs to the family of C14 Laves-phase. Detail parameters of the structures are shown in the supporting information. The calculated equations of state (EOS) for the Fd3¯m and P63/mmc are shown in Fig. 1(b). The volume change is discontinuous with 0.59% at Fd3¯m-to-P63/mmc transition point, which suggests the transition is the first-order nature.

    Then the phonon band structure along highly symmetrical directions within the Brillouin zone and projected phonon density of states (PHDOS) for two phases of HfZn2 were calculated to investigate the dynamical stability, which is an important condition for judging the stability of the structure. The dynamic properties of Fd3¯m at 10 GPa and P63/mmc at 200 GPa were studied, as shown in Fig. 3. The absence of imaginary frequency throughout the Brillouin zone confirms the dynamical stability of both phases. Additionally, because hafnium is much heavier than zinc, the vibrational frequency of Hf atom is obviously lower than that of Zn atom. Therefore, the low-frequency bands primarily originate from the heavier Hf atoms, while lighter Zn atoms dominate higher-frequency modes.

    Mechanical stability is another important criterion for assessing the stability of crystal structures. To investigate the mechanical properties of the C15 and P63/mmc phases, we calculated their elastic constants, as presented in Table 1. In addition, for mechanically stable crystals, the independent elastic constants Cij must satisfy the Born–Huang stability criteria.[20] In the cubic phase, there are three independent components (C11, C44, and C12), and the mechanical stability criteria are defined by the following equations:

    In the hexagonal phase, there are five independent components (C11, C33, C44, C12, and C13). The criteria for mechanical stability are given by the three equations:

    It is obvious that the elastic constants of Fd3¯m and P63/mmc satisfy the above conditions, indicating that they are mechanically stable.

  • Previous studies have extensively investigated the elastic properties of the cubic C15 phase of HfZn2. In this work, we mainly focused on the C14 Laves-phase. Figure 4 shows the elastic constants, bulk modulus (BV, BR, B), shear modulus (GV, GR, G), Young’s modulus E, the Pugh criterion (B/G) and Poisson’s ratio as functions of pressure. These physical quantities are obtained by the following equations for the hexagonal phase:[21]

    In terms of the Voigt–Reuss–Hill approximations,[22]

    Young’s modulus E and Poisson’s ratio ν are given by the following equations:[23]

    It is observed that the elastic constants C11, C12, C13, C33 and C66 increase with applied pressure. In contrast, C44 initially increases in the pressure range of 50–150 GPa, but subsequently decreases in the range of 150–250 GPa (Fig. 4(a)). These variations in the elastic constants result in corresponding changes in the moduli, as depicted in Figs. 4(b) and 4(c). It is known that if the Pugh criterion (B/G) value is larger than 1.75, the material behaves in a ductile manner, otherwise, it behaves in a brittle manner. The B/G values increase from 1.86 to 4.09 over the pressure range of 50–250 GPa (Fig. 4(d)), which indicates that the C14 Laves-phase of HfZn2 has good ductility. Poisson’s ratio is another way to evaluate the mechanical response of materials to external stress. The high and low values of Poisson’s ratio correspond to good ductility and brittleness, respectively. As shown in Fig. 4(d), the Poisson’s ratio values range from 0.27 to 0.39, consistent with the B/G ratios.

  • The electronic properties of HfZn2 under high pressure are further explored. Figure 5 presents the electronic band structures along the high-symmetry directions in the Brillouin zone and partial densities of states (PDOS) for Fd3¯m and P63/mmc phases at different pressures. The overlap between the conduction and the valence bands for the two structures suggests that the above phases are metallic (Figs. 5(a) and 5(c)). The PDOS around the Fermi level is dominated by the Zn-p and Hf-d orbitals for all structures with almost no Hf-s component as shown in Figs. 5(b) and 5(d).

    Analyzing the types of chemical bonds for the stable structures is also an important aspect. The electronic localization function (ELF)[24] has become a successful method to characterize the localized distribution of electrons and bonding nature in materials. Typically, ELF values greater than 0.5 indicate localized electrons, corresponding to covalent bonds, while ELF values less than 0.5 suggest delocalized electrons, indicative of ionic bonds. The value 0 refers to very low charge density. From the calculated ELF of Fd3¯m and P63/mmc phases (Fig. 6), it is evident that the Hf–Zn bond exhibits ionic character. Then, Bader charge analysis was used to measure the amount of charge transfer from Fd3¯m phase to P63/mmc phase at different pressures. It can be observed that each Zn gains about 0.43 electron and 0.40 electron is transferred from Hf for Fd3¯m and P63/mmc structure, at 10 GPa and 200 GPa, respectively.

  • To observe the superconductive properties of the Fd3¯m and P63/mmc phases for HfZn2 under high pressure, the electron-phonon coupling (EPC) calculations were performed, and the results are shown in Table 2. As the low-pressure phase, HfZn2 with space group Fd3¯m exhibits the highest superconducting critical temperature of 3.89 K at 10 GPa, due to a large electron–phonon coupling parameter λ around 0.74. Although pressure generally enhances logarithmic average phonon frequency ωlog, which is directly proportional to superconductive critical temperature, pressure significantly suppressed electron–phonon coupling parameter λ of Fd3¯m phase of HfZn2 as shown in Table 1. This suppression originates from a sharp decrease in Fermi surface DOS (N(EF)) from 39.04 eV to 33.81 eV and weakened Hf-d/Zn-p hybridization. Consequently, HfZn2 with space group Fd3¯m at 20 GPa exhibits a superconducting critical temperature of only 0.30 K with λ collapsing to 0.35 and ωlog rising to 176.86 K. After the transition from Fd3¯m phase to P63/mmc phase, the superconducting critical temperature of HfZn2 increases to 0.55 K at 50 GPa. This phase transition reconstructs the Fermi surface, stabilizing λ near 0.37 despite decreasing N(EF) attributed to Brillouin zone folding that reaggregates Hf-d states near N(EF) and sustains strong d–p hybridization. Unlike Fd3¯m phase, the superconducting critical temperature of the P63/mmc phase is not sensitive to pressure below 150 GPa, they are 0.65 K and 0.41 K at 100 GPa and 150 GPa, respectively. These fluctuations arise from competition between increasing ωlog from 203.46 K to 256.76 K and declining N(EF) from 63.91 eV to 48.45 eV. The increase in ωlog dominates at 100 GPa, resulting in Tc = 0.65 K, while N(EF) loss prevails at 150 GPa, lowering Tc to 0.41 K. The electron–phonon coupling parameter λ is almost unchanged in the pressure range 50–150 GPa. As the pressure is further increased to 200 GPa, the electron–phonon coupling parameter λ suddenly drops to 0.25, triggered by severe Hf-d orbital delocalization (N(EF) = 29.08 eV) that suppresses the electron–phonon matrix elements. As a result, the superconducting critical temperature of P63/mmc phase decreases to 0.02 K despite ωlog reaching 292.66 K.

4.   Summary
  • The study conducted a comprehensive study on the high-pressure phase diagram of HfZn2 using crystal structure prediction based on density functional theory. Our findings revealed a high-pressure C14 phase of HfZn2 with the space group P63/mmc. The C15 to C14 phase transition of HfZn2 emerges at 20 GPa, and when pressure further increases to 275 GPa, HfZn2 tends to decompose into Hf and Zn. Then we investigated the properties of high-pressure C14 phase of HfZn2, including its mechanical, chemical bonding and superconductive properties. We first clarify the mechanical properties of C14 phase HfZn2 under pressure. The ratio of bulk modulus and shear modulus (B/G) increases from 1.86 to 4.09 in the pressure range of 50–250 GPa, which indicates that the C14 phase of HfZn2 exhibits excellent ductility under high pressure. Moreover, Zn gains about 0.43 electron from Hf at 10 GPa, and pressure facilitates electron transfer from Hf to Zn. The superconducting critical temperature of C14 HfZn2 is about 0.55 K in a pressure range of 50–150 GPa. The pressure-induced superconductivity of C15 and C14 HfZn2 will enhance the fundamental understanding of high-pressure properties of Laves-phase alloys. Elucidating the high-pressure behaviors of the C14 and C15 phases of HfZn2 will trigger further applications of Laves-phase alloys under extreme conditions.

Figure (6)  Table (2) Reference (24)

Catalog

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return