2026 Volume 35 Issue 4
Article Contents

Xiang Liu, Xiguang Wang, Zhixiong Li, Xiufeng Han, Guanghua Guo. Engineering nonreciprocal damping and polarization of spin waves in ferromagnetic domain wall via Dzyaloshinskii–Moriya interaction and spin-transfer torque[J]. Chinese Physics B, 2026, 35(4): 047502. doi: 10.1088/1674-1056/ae2771
Citation: Xiang Liu, Xiguang Wang, Zhixiong Li, Xiufeng Han, Guanghua Guo. Engineering nonreciprocal damping and polarization of spin waves in ferromagnetic domain wall via Dzyaloshinskii–Moriya interaction and spin-transfer torque[J]. Chinese Physics B, 2026, 35(4): 047502. doi: 10.1088/1674-1056/ae2771

Engineering nonreciprocal damping and polarization of spin waves in ferromagnetic domain wall via Dzyaloshinskii–Moriya interaction and spin-transfer torque

  • Received Date: 26/10/2025
    Accepted Date: 24/11/2025
    Available Online: 01/04/2026
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Figures(4)

Article Metrics

Article views(230) PDF downloads(0) Cited by(0)

Access History

Engineering nonreciprocal damping and polarization of spin waves in ferromagnetic domain wall via Dzyaloshinskii–Moriya interaction and spin-transfer torque

Abstract: Manipulation of spin-wave polarization is fundamental for designing novel magnonic devices based on the polarization coding technique. Here, we demonstrate the generation of left-handed polarized spin waves (LPSWs) in a ferromagnetic domain wall and their polarization modulation through the combined effect of the Dzyaloshinskii–Moriya interaction (DMI) and spin-polarized electric current. A phase diagram delineating the stability regions of left- and right-handed polarized spin waves (RPSWs) is constructed as a function of DMI strength and current density. Our results reveal a pronounced DMI-induced nonreciprocal damping effect, predominantly manifested in RPSWs while leaving LPSWs largely unaffected. This phenomenon enables effective filtering of RPSWs in one direction, allowing the realization of pure LPSW propagation as well as elliptically polarized spin waves with tunable eccentricity. Our work provides a viable method for controlling spin-wave polarization and nonreciprocal propagation in ferromagnetic systems.

1.   Introduction
  • Magnonics has garnered significant interest due to the numerous advantages of magnon-based devices over traditional electronic systems, including energy-efficient information transmission without Joule heating, broad operational bandwidth spanning GHz to THz frequencies, and nanoscale component integration.[1–9] Based on the modulation of the amplitude and phase of spin waves (SWs), various magnonic devices have been developed, such as amplitude encoders, phase encoders, transducers, magnonic transistors, and related logic gates.[10–15] However, functional devices based on SW polarization are still limited to antiferromagnets and ferrimagnets.[16–18] This limitation arises from the presence of two magnetic sublattices with antiparallel magnetization in antiferromagnets and ferrimagnets, naturally giving rise to two types of polarized SW modes: left-handed polarized SWs (LPSWs) and right-handed polarized SWs (RPSWs). In contrast, in ferromagnets, only RPSWs exist, and magnonic devices based on polarization modulation have not yet been realized. In our earlier works,[19,20] we demonstrated that LPSWs can be induced in ferromagnets by spin transfer torque (STT), coexisting with RPSWs to form elliptically polarized SWs. While pure LPSWs have not yet been realized in ferromagnets, this limitation hinders, to a certain extent, the implementation of polarization-encoded magnonic devices.

    Nonreciprocal propagation of SWs is important for designing functional magnonic devices.[21–24] The Dzyaloshinskii–Moriya interaction (DMI) is a type of exchange interaction characterized by its chiral nature.[25–28] Consequently, DMI naturally induces nonreciprocal propagation of SWs. The DMI-induced SW nonreciprocity is reflected in a term linear in the wave vector k in the SW dispersion relation, resulting in asymmetric phase, velocity, attenuation length, etc., of SWs propagating in opposite directions.[29–34] DMI also gives rise to SW damping nonreciprocity,[35] meaning SWs propagating in opposite directions experience different damping constants, which is especially significant in the low-frequency range. Thus, the DMI-induced nonreciprocal damping effect can be clearly observed in magnetic domain walls (DWs), where the SW cutoff frequency is zero. To date, DMI-induced SW nonreciprocity has been widely exploited to design novel magnonic devices.[5,7,36–38] It is also worth noting that the DMI-induced linear shift of SW dispersion is similar to the SW Doppler shift induced by spin-polarized electric currents. As a result, the critical current required to generate LPSWs in ferromagnets can be significantly reduced in the presence of DMI.[19] Additionally, the interplay between DMI and strain can manipulate SW dispersions in magnonic crystals.[39] DMI also induces non-zero Berry curvature and leads to the thermomagnonic Hall effect in checkerboard ferromagnets.[40]

    Here, we study the propagation and manipulation of SWs in a ferromagnetic DW under the combined effect of DMI and spin-polarized electric current. LPSWs are produced by STT. Interestingly, the DMI-induced damping nonreciprocity differs for LPSWs and RPSWs; this effect can be utilized to filter out RPSWs, achieving pure LPSW propagation in a target direction. The SW phase diagram is plotted as a function of DMI strength and current density, and the analytical results are verified by micromagnetic simulations.

2.   Model and method
  • The model considered here is a Bloch DW in a thin ferromagnetic film with perpendicular magnetic anisotropy, as shown in Fig. a. The equilibrium magnetization at the DW center is directed along the x axis. The SWs propagating in the DW are governed by the Landau–Lifshitz–Gilbert (LLG) equation

    where m = M/Ms is the unit vector of the magnetization, γ is the gyromagnetic ratio, and α is the Gilbert damping constant. cj = PjeμB/[eMs(1 + β2)] is the STT coefficient, where je is the current density, μB is the Bohr magneton, P is the spin polarization of the current, e is the electron charge, and β is the nonadiabatic torque coefficient. The effective field is defined as Heff = −δE/(μ0δM). The free energy E includes the exchange interaction, uniaxial anisotropy, demagnetization energy, and bulk DMI.[7,41] Therefore, the effective field can be expressed as

    with q = 2A/(μ0Ms), HK = 2Keff/(μ0Ms), Keff=K−μ0Ms2/2, and Db = 2D/(μ0Ms). Here, A is the exchange constant, D is the DMI constant, and K is the anisotropy constant. The demagnetization field is given by Hd = −NyMs(m · ey)ey.[42] Here, Ny = d/(d + πΔ), where d is the thickness of the film and Δ=A/Keff is the characteristic width of the DW.

    Consider a small perturbation around the static equilibrium, the unit magnetization vector can be expressed as mr = (mr, mθ, mϕ) in spherical coordinates, where θ and ϕ represent the polar and azimuthal angles, respectively. mθ and mϕ are small perturbations that deviate from the equilibrium state in the presence of SWs, and mr = 1 under the linear approximation. The equilibrium Bloch DW is approximated by the Walker profile tan(θ/2) = exp(±y/Δ), ϕ = 0.[43] The partial differential equations describing SWs in the DW are obtained by linearizing Eq. (1)

    The SW solutions in DWs can be assumed as[44]

    Substituting Eq. (4) into Eq. (3) and treating the effect of DMI as a perturbation term,[31,45] one obtains the SW dispersion relation and imaginary frequency

    Here, ωrL and ωrR represent the dispersions of LPSW and RPSW, respectively, and ωiL and ωiR denote the imaginary frequencies of LPSW and RPSW, respectively.

    For numerical calculations, the magnetic parameters corresponding to the L10-ordered Fe50Pd50 (001) film are used:[46]Ms = 1 MA/m, A = 15 pJ/m, and K = 1 MJ/m3. The Gilbert damping constant α = 0.01 is adopted to ensure proper SW propagation. The nonadiabatic STT coefficient is taken as β = 0.014. Full micromagnetic simulations are performed using MuMax3[47] to verify the theoretical predictions. The ferromagnetic film with a Bloch DW is discretized into a 2200 × 61 × 1 grid with cell size 2 nm × 2 nm × 1 nm. An absorbing boundary condition is applied to eliminate the influence of reflected SWs.[48] To simulate the SW dispersion spectrum, a sinc-shaped magnetic pulse h(t) = hey sin(2πfct)/(2πfct) is used, with h = 10 mT and fc = 50 GHz. The time evolution of my is monitored at all cells located at the DW center for a duration of 50 ns, with a discrete time step of 10 ps. The SW dispersion relationships are obtained using a spatiotemporal fast Fourier transform.

3.   Results and discussion
  • The occurrence of STT-induced LPSW is determined by the condition that the maximum frequency of the LPSW dispersion should be larger than zero, i.e., ωrL-max > 0,[19] which gives the critical coefficient cje derived from Eq. (5)

    Here, the positive and negative signs (±) correspond to the cases where the signs of cj and Db are the same and opposite, respectively. Specifically, if Db is positive, when the STT coefficient cj is also positive, the sign of the first term on the right-hand side of Eq. (8) is positive; if cj is negative, the first term is negative. Therefore, the DMI can reduce the critical current density for the generation of LPSW if the signs of cj and Db are opposite. Equation (8) also indicates that the demagnetization factor Ny can affect the critical current density. Ny reflects the DW structure, and a large DW width in a thin film is beneficial for reducing the critical current density. Therefore, in experiments, it is recommended to use wider DWs in thin films with larger DMI to reduce the critical current density.

    The STT also leads to instability of the system, which occurs when ωiL(R)-min < 0.[49–52] The critical coefficient cjs at the onset of instability is obtained from Eq. (7)

    Here, the signs (±) of the first term on the right-hand side of Eq. (9) have the same meaning as in Eq. (8). As |cje| < |cjs|, stable LPSWs can exist in DWs if the current satisfies |cje| < |cj| < |cjs|.

    Based on the two critical currents cje and cjs given in Eqs. (8) and (9), we plot the phase diagram for the stable LPSW and RPSW states and SW instability determined by the strength of DMI and current density, which is shown in Fig. 1(b). The critical current curves cje and cjs divide the Db ∼ cj space into four regions. In region A, with small current and weak DMI, only the RPSWs exist. Typical SW dispersions in region A are given in Figs. 1(c) and 1(d). The LPSW dispersion is below the abscissa, indicating that only stable RPSWs can be hosted in the domain wall. The difference in SW dispersions between Figs. 1(c) and 1(d) arises from the fact that the effects of DMI and STT cancel each other in Fig. 1(c), while they are enhanced in Fig. 1(d). In region B, the stable LPSW can be induced by STT and coexists with the RPSW. The corresponding SW dispersions are presented in Fig. 1(e). Here, the STT and DMI push the LPSW dispersion curve across the horizontal axis, generating LPSWs with positive frequency. The stable LPSWs exist when the wave vector k is limited in the range

    for Db > 0 and cj < 0. In regions C and D, the condition for the onset of instability given by Eq. (9) is satisfied, and SWs become unstable.

    To further demonstrate the characteristics of the LPSW and RPSW modes, we excite the SWs using a harmonic field h(t) = hey cos(2πft) with h = 1 mT and f = 1 GHz (indicated by the red lines in Figs. 1(c)–1(e)), and simulate the SW propagation in the DW. The results are presented in Fig. 2. Figures 2(a) and 2(b) show the propagation profiles of SWs in region A (two points indicated by black dots in Fig. 1(b)), and the corresponding spatial Fourier transforms are presented in Figs. 2(d) and 2(e). Here, only the RPSWs are excited. The right-moving RPSW with wave vector kR1 is significantly weaker than the left-moving RPSW with wave vector kR2, reflecting strong damping nonreciprocity. Reversing the direction of the current, the damping nonreciprocity feature is almost the same, indicating that the STT-induced SW damping has a weak effect as it depends on the current direction.[53] This damping nonreciprocity of SWs in DWs is induced by the DMI.[35] It is worth noting that the DMI-induced nonreciprocal damping has been verified experimentally.[54] In region B (a point represented by the green dot in Fig. 1(b)), both LPSWs and RPSWs are simultaneously stimulated as shown in Fig. 2(c). Here, the strength of the RPSW propagating to the right (kR1) is significantly smaller than that of the RPSW propagating to the left (kR2) (see Fig. 2(f)), demonstrating the DMI-induced nonreciprocal damping. In contrast, the strengths of the two LPSWs propagating to the left (kL2) and right (kL1) are comparable, indicating that the DMI-induced damping nonreciprocity is not manifested on the LPSWs. Due to the difference in damping nonreciprocity between the LPSW and RPSW, the SW propagating to the left in Fig. 2(c) is a superposition of the LPSW (kL2) and RPSW (kR2), and the trajectory of magnetization precession is an ellipse with large eccentricity. Conversely, the SW propagating to the right is nearly a pure LPSW, and the trajectory is a circle with left-handed precession. Thus, we achieve pure LPSWs in ferromagnets, and the propagation direction of the pure LPSW can be reversed by switching the chirality of DMI and the direction of the spin-polarized electric current.

    To clarify the different manifestations of the damping nonreciprocity on the LPSW and RPSW, we analyze the imaginary frequency of SWs given by Eq. (7) and calculate its dependence on the wave vector k, which is presented in Fig. 3. It shows that both the LPSW and RPSW display obvious nonreciprocity of the imaginary frequency for positive and negative k, while the chirality of nonreciprocity is opposite. The nonreciprocity is more significant for small k, and a jump occurs as k → 0. Therefore, both the RPSW and LPSW exhibit nonreciprocal damping. This nonreciprocity, however, is determined by the sign of the wave vector k rather than the direction of SW propagation. As shown in Fig. 1(e), the two excited RPSWs have wave vectors of opposite signs and propagate in opposite directions. In contrast, although the two LPSWs also travel in opposite directions, their wave vectors have the same sign. Consequently, the damping nonreciprocity is not observed clearly in the LPSWs.

    Exploiting STT-generated LPSWs and the DMI-induced damping nonreciprocity, we can not only obtain pure LPSWs but also modulate the SW polarization. Figure 4 shows the trajectories of the magnetization precession at site x = −500 nm under different current densities. We see that, when cj = −0.44 km/s, the magnetization precession is RPSW-dominated right-handed elliptical. At cj = −0.46 km/s, the precession trajectory is LPSW-dominated left-handed elliptical. When cj increases to −0.49 km/s, the SW becomes nearly linearly polarized. Thus, by varying the current density, we can modulate SW elliptical polarization with tunable eccentricity.

4.   Summary
  • We theoretically investigate SWs and their manipulation in ferromagnetic DWs through the interplay of the DMI and STT. We demonstrate the emergence of LPSWs and construct a phase diagram depicting the stable existence regions for LPSWs and RPSWs. A DMI-induced nonreciprocal damping of SWs for positive and negative wave vectors is observed. This damping nonreciprocity is predominantly manifested in RPSWs, while its effect on LPSWs is negligible. The asymmetry arises because two RPSWs propagating in opposite directions have opposite signs of the wave vector, whereas the DMI-induced LPSWs share the same wave vector signs despite propagating in opposite directions. This feature enables the generation of pure LPSWs in a desired direction, as well as elliptically polarized SWs with tunable eccentricity. Our work provides an effective approach for controlling SW polarization and may be utilized in designing magnonic devices based on polarization coding techniques.

Figure (4)  Reference (54)

Catalog

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return