2026 Volume 35 Issue 5
Article Contents

Yingying Chen, Zihao Jiao, Haizhen Wang, Dehui Li. Förster energy transfer boosts indirect anisotropic interlayer excitons in 2L-MoSe2/perovskite heterostructures[J]. Chinese Physics B, 2026, 35(5): 057112. doi: 10.1088/1674-1056/ae5782
Citation: Yingying Chen, Zihao Jiao, Haizhen Wang, Dehui Li. Förster energy transfer boosts indirect anisotropic interlayer excitons in 2L-MoSe2/perovskite heterostructures[J]. Chinese Physics B, 2026, 35(5): 057112. doi: 10.1088/1674-1056/ae5782

Förster energy transfer boosts indirect anisotropic interlayer excitons in 2L-MoSe2/perovskite heterostructures

  • Received Date: 29/12/2025
    Accepted Date: 26/02/2026
    Available Online: 01/05/2026
通讯作者: 陈斌, bchen63@163.com
  • 1. 

    沈阳化工大学材料科学与工程学院 沈阳 110142

  1. 本站搜索
  2. 百度学术搜索
  3. 万方数据库搜索
  4. CNKI搜索

Figures(4)

Article Metrics

Article views(205) PDF downloads(0) Cited by(0)

Access History

Förster energy transfer boosts indirect anisotropic interlayer excitons in 2L-MoSe2/perovskite heterostructures

Abstract: Interlayer excitons (IXs) in two-dimensional (2D) van der Waals heterostructures have attracted considerable attention due to their unique optical and electronic properties. Owing to the spatially indirect nature, the radiative emission efficiency is highly sensitive to interlayer twist angles. Further considering that their uniformly oriented out-of-plane dipole moments limit directional emission, strategies to simultaneously improve emission efficiency and induce optical anisotropy warrant in-depth investigation. In this work, we report significant photoluminescence (PL) enhancement and optical anisotropy of IXs in 2L-MoSe2/perovskite heterostructures mediated by energy transfer from ReS2. We attribute this enhancement to Förster resonance energy transfer (FRET), which increases the 2L-MoSe2 emission by approximately eight-fold at room temperature, and nearly doubles the emission intensity of momentum-indirect IXs in 2L-MoSe2/perovskite heterostructures at 78 K. Importantly, the optical anisotropy of ReS2 can be effectively imprinted onto 2L-MoSe2 and associated indirect IXs during the energy transfer process, yielding a linear dichroism of approximately 1.1 for both intralayer excitons and IXs with identical polarization directions. These findings expand the scope of IX study beyond direct bandgap materials with strong intrinsic emission to include systems with indirect bandgaps, offering new avenues for realizing high-performance polarization-sensitive optoelectronic devices.

1.   Introduction
  • Energy transfer and charge transfer constitute the fundamental basis of van der Waals heterostructures, giving rise to fascinating phenomena and novel physical states.[1–3] Due to the reduced dielectric screening in layered materials, exciton states formed by charge transfer or modulated by energy transfer dominate the emission characteristics of these materials and their heterostructures.[4] These exciton states exhibit distinct luminescence properties across different systems.[5–7] For instance, monolayer transition metal dichalcogenides (TMDs) with direct bandgaps exhibit strong exciton emission with large binding energies that can sustain to room temperature.[8,9] In contrast, the emission efficiencies of few-layer TMDs possessing indirect bandgaps, as well as their heterostructures featuring indirect interlayer transitions, are generally characterized by low radiative emission efficiency.[10–12] Therefore, improving their emission performance and efficiency is of significant research importance. In this situation, many approaches have been be implemented to boost their performance, such as chemical treatment,[13] dielectric and strain engineering,[14,15] plasmonic enhancement,[16] cavity integration,[17] electrostatic doping,[18] and introducing strong light–matter interactions to form polaritons,[19] moiré excitons,[20] or single photon emitters.[21] Among these, energy transfer, referring to donor-acceptor exchange electronic excitation, appears highly competitive owing to its lossless and low-cost nature.[3] This phenomenon has been extensively discussed in quantum dots systems, and subsequently extended to van der Waals (vdW) heterostructures.[22,23] Generally, there are two types of energy transfer according to their different working mechanisms, including Förster type which relies on dipole–dipole coupling over long distances (∼10 nm), and Dexter type which involves electron exchange over short distances (∼1 nm). These energy transfer processes have been demonstrated to efficiently improve their emission performance, which can be further modulated by external electric field,[24] magnetic field,[25] electrostatic gating,[26] strain[15,27] or special intermediate states such as dark[28] or entangled states.[29] These findings broaden the scope of optoelectronic applications in light-emitting diodes,[30] solar cells,[31] photodetectors[32] and phototransistors.[33]

    In particular, interlayer excitons (IXs) in vdW heterostructures, characterized by spatially indirect natures exhibiting long lifetimes and repulsive dipolar interaction, have attracted intensive attention.[34] Recently, several studies have demonstrated the enhanced IX emission in TMD-based heterostructures.[35,36] Most investigations have concentrated on momentum-direct IXs or those with small twist angles in TMD heterobilayers that already possess strong radiative emission, while momentum-indirect IXs in few-layer TMD-based heterostructures remain rarely discussed. Moreover, studies have shown that heterostructures incorporating other 2D materials, e.g., InSe or ReS2, facilitate the transfer of optical anisotropy to IXs in addition to enhancing their emission intensity by tailoring the energy transfer process.[37–40] These heterostructures exhibit strong anisotropic IX emission variations, therefore, by combining and utilizing these functional components, IXs in these systems are expected to yield novel phenomena that may attract renewed attention. Besides, considering materials with inherently weak light absorption, e.g., MoSe2, it is of great importance to boost their emission to achieve effective optoelectronic devices.

    Here, we report enhanced IX emission with induced optical anisotropy in ReS2/hBN/2L-MoSe2/perovskite heterostructures. By utilizing a few-layer ReS2, the exciton emission can be strongly boosted with an enhancement factor of approximately eight-fold for 2L-MoSe2 even at room temperature. Such enhancement further extends to indirect IXs in 2L-MoSe2/(iso-BA)2PbI4 heterostructure, showing a maximum enhancement factor of approximately two-fold at liquid nitrogen temperature. This enhancement capability exhibits varying power and temperature dependence between intralayer excitons in 2L-MoSe2 and IXs in 2L-MoSe2/(iso-BA)2PbI4, contingent upon the energy transfer efficiency. More importantly, the optical anisotropy of ReS2 has been demonstrated to transfer successfully to 2L-MoSe2 and resultant IXs with identical polarization direction and a linear dichroism of approximately 1.1. These observations facilitate the generation of momentum-indirect IXs with both strong emission and anisotropy, circumventing the strict requirement for specific rotation angles in TMD heterobilayers to form near-direct interlayer transitions, thereby expanding their potential applications for enhancing the indirect transitions in next-generation optoelectronic devices.

2.   Results and discussion
  • Figure 1(a) illustrates the schematic diagram of the ReS2/hBN/2L-MoSe2 heterostructure, in which the few-layer ReS2 and 2L-MoSe2 are separated by a few-layer hBN flake. The heterostructure was fabricated by mechanical exfoliation from bulky crystals followed by the dry-transfer method onto a SiO2 (300 nm)/Si substrate (Fig. 1(b)). According to previous literature, the band alignment between few-layer ReS2 and 2L-MoSe2 forms an indirect type-II configuration, favoring both energy and charge transfer processes.[41–43] To eliminate the effect of charge transfer process which would quench their PL intensity, a thin layer of hBN (∼10 nm) was inserted to inhibit charge transfer while permitting the occurrence of energy transfer. Figure 1(c) displays the PL spectra of the ReS2/hBN/2L-MoSe2 heterostructure at room temperature. While ReS2 shows an exciton peak at 790 nm in the isolated region but becomes invisible in the heterostructure region, 2L-MoSe2 exhibits an obvious enhancement around 810 nm in the heterostructure region. It should be noted that 2L-MoSe2 exciton also shows a stronger emission in the hBN/2L-MoSe2 region compared to bare 2L-MoSe2, mainly due to the suppression of surface disorder and defects induced between the 2L-MoSe2 and SiO2/Si substrate.[44] Therefore, to avoid ambiguity regarding substrate influence, we focus our comparison on the PL intensity between hBN/2L-MoSe2 and ReS2/hBN/2L-MoSe2. Notably, the indirect intralayer exciton emission shows the strongest PL intensity in the ReS2/hBN/2L-MoSe2 heterostructure. Combining the hBN insertion and the observed quenched ReS2 emission, this enhanced emission in this heterostructure can be attributed to the non-radiative energy transfer from few-layer ReS2 to 2L-MoSe2, facilitated by the significant spectral overlap between the ReS2 absorption and 2L-MoSe2 emission.[45,46] Such energy transfer should be ascribed to the Förster type according to our previous study in the ReS2/hBN/1L-MoSe2 device,[47] in which the ∼10 nm thickness of hBN spacer allows optimal and efficient dipole–dipole coupling[48] while effectively eliminating the possibility of Dexter type energy transfer or charge tunneling. Notably, although 2L-MoSe2 possesses a momentum-indirect bandgap, its direct and indirect bandgap values are almost degenerate.[49] At finite temperatures, due to the layer decoupling caused by interlayer thermal expansion,[45] the direct K–K transition dominates its exciton emission in the PL spectra. Consequently, the Förster resonance energy transfer (FRET) from ReS2 preferentially populates these direct exciton states, thereby boosting the observed exciton emission intensity. Moreover, this PL enhancement differs from local interfacial charge transfer or heterostructure inhomogeneity since the uniform enhanced emission across the heterostructure region has been demonstrated in our previous work.[47]

    To quantify the PL enhancement, we define the PL enhancement factor as R = IHS/IM, where IHS is the PL intensity of ReS2/hBN/2L-MoSe2 heterostructure and IM represents the constituent reference hBN/2L-MoSe2 emission intensity. Here, we compare ReS2/hBN/2L-MoSe2 with hBN/2L-MoSe2 but not bare 2L-MoSe2 to eliminate the influence of dielectric environment variation. All samples share the same hBN dielectric interface and the same hBN/SiO2 dielectric condition underneath. Interestingly, we observe that this enhancement factor decreases with increasing excitation power. As shown in Fig. 1(d), 2L-MoSe2 emission shows pronounced enhanced PL intensity under the excitation power of 82.8 μW and moderate enhancement with the power of 8020 μW. We further perform the power-dependent PL studies to elucidate the in-depth energy transfer mechanism. While the emission intensities of both hBN/2L-MoSe2 and ReS2/hBN/2L-MoSe2 increase with increasing incident power, the rate of increase for ReS2/hBN/2L-MoSe2 is notably smaller (Fig. 1(e)). Further fitting PL intensity with incident power using the power law I = Pα, where I, P and α donate the PL intensity, laser power and power index, respectively. We determined that the α values of 2L-MoSe2 emission in ReS2/hBN/2L-MoSe2 and hBN/2L-MoSe2 regions are 0.6 and 0.9, respectively. The detailed power-dependent PL comparisons are provided in Fig. S1. Although lasing heating effects may account for some reason for this behavior at high power range above 1 mW, the energy transfer plays an important role at elevated powers. Figure 1(f) summarizes the enhancement factor trend across this excitation power range, which shows a maximum R ≈ 8.2 at 82.8 μW and minimum R ≈ 2.2 at 8020 μW. This decreased enhancement may arise from the intense energy transfer that induces large exciton density, leading to exciton–exciton annihilation at sufficiently high excitation powers thus reducing α value. These observations further validate the contribution of FRET to this PL enhancement and rule out the effect of dielectric environment variations as it should be power-independent. We also note that such enhancement factor is smaller than that in our previously reported ReS2/hBN/1L-MoSe2 heterostructure which exhibits a ∼58.7-fold enhancement.[47] The smaller spectral overlap between the absorption of 2L-MoSe2 and the emission of ReS2, as well as the indirect nature of 2L-MoSe2, likely contribute to this moderate energy transfer efficiency and PL enhancement. Nevertheless, FRET remains an effective and non-destructive method for addressing weak emission especially in indirect system, which can improve radiative emission efficiency and yield a large relative enhancement factor.

    Interestingly, further stacking a thin flake of 2D perovskite layer can induce intriguing phenomena (Fig. 2(a)). As we observed in our previous work, TMD/perovskite heterostructures can form robust IXs irrespective of stacking angles and lattice mismatch.[50,51] In this case, the IX emission in the TMD/perovskite heterostructure is expected to be efficiently boosted through the energy transfer from ReS2. To validate this assumption, we fabricated a ReS2/hBN/2L-MoSe2/(iso-BA)2PbI4 heterostructure using the same assembly methods (iso-BA represents iso-butylamine with a chemical formula of C4H9NH3) (Fig. 2(b)). As shown in Fig. 2(c), 2L-MoSe2 and (iso-BA)2PbI4 can form type-II heterostructures with a momentum-indirect nature, enabling the formation of indirect IXs, consistent with our previous work.[11,50] Since the inserted hBN layer allows energy transfer from ReS2 to 2L-MoSe2/(iso-BA)2PbI4 heterostructure (hereafter referred to as HS) and blocks charge transfer from ReS2 to HS, such energy transfer is anticipated to manipulate the optical performance of IX emission.

    We subsequently carried out PL measurements at 78 K, as shown in Fig. 2(d), while hBN/HS shows a peak around 775 nm corresponding to the intralayer exciton of 2L-MoSe2, ReS2/hBN/HS exhibits an additional peak near 795 nm and a strong peak around 777 nm that can be ascribed to the superposition of emission from few-layer ReS2 and 2L-MoSe2.[45,52] Similar phenomena can be observed in the ReS2/hBN/2L-MoSe2 heterostructure, which shows enhanced overall emission intensity due to the efficient energy transfer (Fig. S2). Importantly, at the low energy side, a pronounced broad peak appears with a central peak at 925 nm, which can be ascribed to IXs in hBN/HS according to their band alignment.[41,43] Notably, this IX emission exhibits almost two-fold PL enhancement in the presence of ReS2-integrated heterostructure. We attribute this enhanced emission to energy transfer from ReS2 to HS, enabling momentum-indirect IXs in ReS2/hBN/HS with increased emission intensity. Specifically, considering the in-plane exciton nature of ReS2 and out-of-plane nature of IXs, the energy and charge transfer processes can be described as follows: (1) initial exciton generation in 2L-MoSe2 via FERT from ReS2 to 2L-MoSe2 to form intralayer hot excitons, predominantly populating the direct states with a fraction evolving into the indirect states; (2) rapid intralayer thermalization and intervalley scattering in 2L-MoSe2; (3) charge transfer occurring at the type-II 2L-MoSe2/(iso-BA)2PbI2 interface to form momentum-indirect IXs. Since the hBN layer hinders the direct charge transfer from ReS2 to HS, FRET provides more energy to 2L-MoSe2 to increase the exciton population, thus enhancing the subsequent IX emission.

    To support this hypothesis, we performed power-dependent PL studies under 633 nm laser excitation at 78 K. As shown in Fig. 2(e), the power dependence of IXs in ReS2/hBN/HS and hBN/HS exhibits divergent tendencies with a turning point around the power of 200 μW. While IXs in hBN/HS show a uniform slope around 0.5, IXs in ReS2/hBN/HS exhibit a larger slope of ∼0.6 below the power of 200 μW and a smaller slope of ∼0.4 above the power of 200 μW. Furthermore, the peak wavelength of IXs also shows a large shift range of 43 nm in ReS2/hBN/HS, significantly larger than the 18 nm shift range observed for IXs in hBN/HS (Fig. S3). We further calculated the enhancement factor by comparing the PL intensity between ReS2/hBN/HS and hBN/HS in Fig. 2(f). As expected, the enhancement factor initially rises with increasing incident power, reaching a maximum enhancement factor of ∼1.8 under the power of 200 μW, followed by a decrease at elevated powers. This power dependence contrasts significantly with 2L-MoSe2 exciton emission shown in Fig. 1(f), but exactly explains the different slope values in Fig. 1(e). Since ReS2/hBN/2L-MoSe2 shows largely enhanced emission intensity under low power conditions, the IX density in ReS2/hBN/HS increase more rapidly with a large slope value. Conversely, the saturation of PL enhancement in ReS2/hBN/2L-MoSe2 at high power regimes results in a reduced slope value for IXs in ReS2/hBN/HS. We should note that this enhancement factor is smaller than that of ReS2/hBN/2L-MoSe2, but still comparable to IXs in the previously reported ReS2/hBN/1L-MoSe2/(iso-BA)2PbI4 device[47] and other ReS2/MoS2 heterostructure.[40] Besides, this observation cannot be simply attributed to the heterostructure inhomogeneity as the interface defect states should not exhibit this unique power-dependent tend.

    To further explore the energy transfer efficiency and its influence on PL enhancement, we carried out the temperature-dependent PL studies of both ReS2/hBN/2L-MoSe2 and ReS2/hBN/HS. As shown in Fig. S4, the exciton peak in ReS2/hBN/2L-MoSe2 gradually redshifts with increasing temperature, consistent with bandgap narrowing in conventional semiconductors. Interestingly, due to relatively close exciton emission in few-layer ReS2 and 2L-MoSe2, these two exciton peaks become distinguishable only at low temperature (Fig. S2). As temperature increases, due to the energy transfer from ReS2 to 2L-MoSe2 depending on the original PL intensity of ReS2 and the absorption-emission spectral overlap between ReS2 and 2L-MoSe2, the exciton emission exhibits contrasting enhancement behavior. Specifically, the PL intensities of both hBN/2L-MoSe2 and ReS2/hBN/2L-MoSe2 initially decreases with increasing temperature, reaching a minimum at 200 K, before increasing up to room temperature (Fig. 3(a)), coinciding with the sudden reduction in spectral overlap ratio around 200 K, similar to that in ReS2/hBN/1L-MoSe2 reported before. This observation also suggests that although enhanced phonon-assisted indirect transitions increase non-radiative recombination with increasing temperature in 2L-MoSe2, efficient energy transfer increases the radiative recombination rate, enabling increased PL intensity of 2L-MoSe2 at elevated temperatures.

    By comparing the PL intensity of ReS2/hBN/2L-MoSe2 with that of hBN/2L-MoSe2, we can obtain the PL enhancement factor as a function of temperature, as shown in Fig. 3(b). This enhancement factor gradually increases with increasing temperature, but shows a sudden drop at 200 K, followed by a continuous increase to a maximum value at room temperature. These observations indicate that the PL enhancement in the ReS2/hBN/2L-MoSe2 heterostructure indeed originates from energy transfer from ReS2 to 2L-MoSe2, which is related to the energy transfer efficiency relying on the spectral overlap between ReS2 and 2L-MoSe2 and total energy of the donor and acceptor system. We should note that this PL enhancement in ReS2/hBN/2L-MoSe2 at low temperature is comparatively moderate relative to their monolayer MoSe2-based counterparts. This phenomenon may be attributed to three reasons: 1) the small bandgap of 2L-MoSe2 reduces the overlap between its absorption spectrum and the emission spectrum of ReS2, resulting in a lower energy transfer efficiency; 2) the indirect bandgap nature at low temperatures limits the intrinsic emission efficiency of 2L-MoSe2 itself, which further impacts the energy transfer efficiency in the ReS2/hBN/2L-MoSe2 heterostructure; 3) both 2L-MoSe2 and few-layer ReS2 require phonon-assisted transition upon excitation, thereby complicating the energy transfer process. Nevertheless, despite these limitations, this energy transfer mechanism effectively improves the emission efficiency of the indirect semiconductors.

    In contrast, IXs in ReS2/hBN/HS exhibit completely opposite temperature dependence. As shown in Fig. 3(c), the IX emission intensity decreases monotonically with increasing temperature for both ReS2/hBN/HS and hBN/HS. This observation can be attributed to the gradually weakened interlayer coupling, leading to reduced electron–hole wave function overlap, thereby decreasing radiative recombination rate and resulting in low emission intensity at elevated temperatures, which becomes distinguishable above 220 K. We also calculated the enhancement factor as function of temperature. As shown in Fig. 3(d), this enhancement factor maintains a relatively constant value at approximately 1.1 across varying temperature. We should note that these R values were obtained under the laser power of 2 mW to ensure visible IX emission due to the significant reduction in indirect IX emission at elevated temperatures. As indicated in Fig. 2(f), the enhancement factor decreases as the incident power exceeds 200 μW; therefore, a smaller enhancement factor is observed in Fig. 3(d). Nevertheless, this result does not affect our observation of the enhancement factor on temperature dependence. It is worth noting that this constant PL enhancement contrasts significantly with the increasing trend observed in ReS2/hBN/2L-MoSe2, which can be attributed to the interplay between varying energy transfer efficiency and band alignment with increasing temperature. As shown in Fig. S5, the IX emission initially blueshifts as temperature increases to 140 K, and then redshifts. This behavior contradicts the expectations of a simple reduction in interlayer bandgap as previously reported,[50] which should be explained by the shifting conduction band minimum of 2L-MoSe2from Γ–K to K point with increasing temperature.[43] Below 140 K, the shift drives the blueshift; above 140 K, as the conduction band minimum of 2L-MoSe2 settles at the K point, the IX peak energy follows the standard bandgap reduction and thereby redshifts with further increasing temperature. The combined effect of these complex factors renders the energy transfer efficiency in ReS2/hBN/HS relatively insensitive to temperature variations.

    Furthermore, considering the anisotropic nature of ReS2 which shows significant differences in light absorption and carrier concentration along different directions, we speculated that the optical anisotropy should be transmitted to IXs accompanied by energy transfer in ReS2/hBN/HS. To validate this, we performed the polarization-resolved PL measurement by rotating a λ/2 waveplate in the excitation path to vary the polarization direction of the excitation light. The emission intensity was then collected and plotted as an anisotropic PL polar plot, as shown in Fig. 4. Figure 4(a) displays a significant anisotropy of ReS2, showing a linear dichroism (defined as Imax/Imin, where Imax and Imin represent the dichroic fitted maximum and minimum intensity, respectively) of approximately 2.1. In contrast, due to the intrinsic in-plane isotropic nature of 2L-MoSe2, hBN/2L-MoSe2 shows uniform emission intensity that is independent of incident polarization (Fig. 4(b)). Remarkably, both ReS2/hBN/2L-MoSe2 and ReS2/hBN/HS exhibit significant optical anisotropy with an identical linear dichroism of about 1.1. This demonstrates the successful anisotropy transfer to both intralayer excitons and IXs, as the intrinsic IXs should be isotropic given the isotropic nature of 2L-MoSe2 and (iso-BA)2PbI4. In this situation, we believe that the anisotropy transfer originates primarily from anisotropic absorption in ReS2 to modulate this FRET process and associated exciton density. The mechanism can be described as follows: (1) anisotropic light absorption in ReS2 which shows strongest along Re–Re chain directions to introduce an initial polarization-dependent exciton population; (2) a large amount energy transfer along the Re–Re chain direction from ReS2 to 2L-MoSe2; (3) exciton population modulation in 2L-MoSe2 via FRET from ReS2 despite its isotropic nature; (4) anisotropic IX emission from the preserved population imbalance, which achieves a higher IX density along the Re chains direction, thus resulting in net anisotropy transfer. The energy and charge transfer process can also be seen in Fig. S6.

    It is also noteworthy that the polarization direction is identical in ReS2/hBN/2L-MoSe2 and ReS2/hBN/HS, but differs from that of individual ReS2, which can also be seen in another ReS2/hBN/2L-MoSe2 sample (Fig. S7). Nevertheless, ReS2/hBN/2L-MoSe2 and ReS2/hBN/HS share identical polarization directions, which may result from a large carrier population along this specific direction in 2L-MoSe2, thereby promoting intralayer exciton dissociation upon excitation and subsequently facilitating IX formation in 2L-MoSe2/(iso-BA)2PbI4. Although this linear dichroism decreases from ∼2.1 in ReS2 to ∼1.1 in IXs that may be ascribed to potential depolarization through energy transfer and indirect IX formation process (such as intervalley scattering and phonon interactions),[47] this value is robust and comparable to IXs reported in other ReS2-based structures.[40,53] These observations suggest that energy transfer serves as an effective strategy to imprint optical anisotropy, paving the way to polarization-sensitive optical devices.

3.   Conclusion
  • In summary, we have demonstrated the efficient energy transfer from ReS2 to 2L-MoSe2 and 2L-MoSe2/(iso-BA)2PbI4 heterostructures, achieving anisotropic IXs with enhanced emission intensity in ReS2/hBN/2L-MoSe2/(iso-BA)2PbI4 heterostructures. We first established the presence of FRET in ReS2/hBN/2L-MoSe2, in which the PL intensity can be enhanced eight-fold at room temperature. This efficient energy transfer subsequently amplifies momentum-indirect IX emission in 2L-MoSe2/(iso-BA)2PbI4 heterostructures by nearly two-fold, enabling a distinct linear dichroism around 1.1. These observations indicate that optical anisotropy can be effectively transmitted through energy transfer in the heterostructure assembly of few-layer TMDs and 2D perovskites, enabling the realization of anisotropic exciton emission incorporated with substantially enhanced intensity. Our findings also evidence that FRET provides a solid platform for enhancing momentum-indirect transitions, offering a robust strategy for realizing highly efficient anisotropic sources in next-generation optoelectronics.

Appendix A Methods
  • Sample preparations ReS2, MoSe2 and hBN are bulk crystals were purchased from HQ Graphene while (iso-BA)2PbI4 bulk crystals were synthesized by solution methods according to our previous work. All constituent flakes were mechanically exfoliated from their bulky crystals on polydimethylsiloxane (PDMS) stamp and then stacked layer by layer on SiO2/Si substrate by dry transfer methods.

    Optical measurements The optical images were captured on an Olympus microscope (BX53M). Samples were mounted in a liquid nitrogen bath cryostat (Cryo Industries of America Inc.) and were measured on a home-built Raman spectrometer (Horiba iHR-550) with a 600 g/mm grating. The PL spectra were acquired under the excitation of a 633-nm He–Ne laser with a 50× objective lens (NA = 0.65) under varying temperatures, which can be continuously tuned from 78 K to 300 K by a temperature controller (Lake Shore Cryotronics, Model 336). For polarization-resolved PL measurement, a set of polarizer (Thorlabs WP25M-VIS) and half-wave plate (Thorlabs AHWP05M-600) were used to control the polarization direction of incident laser, and a polarizer (Thorlabs WP25M-VIS) was placed in the collection optical path to eliminate the polarization of response grating and CCD.

Figure (4)  Reference (53)

Catalog

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return