半导体量子点在白光LED器件上的应用研究?

物理学报

半导体量子点在白光LED器件上的应用研究?

, , , ,

高小钦, 卓宁泽, 王海波, 崔一平, 张家雨. 2015: 半导体量子点在白光LED器件上的应用研究?, 物理学报, null(13): 137801. doi: 10.7498/aps.64.137801

引用本文:

高小钦, 卓宁泽, 王海波, 崔一平, 张家雨. 2015: 半导体量子点在白光LED器件上的应用研究?, 物理学报, null(13): 137801. doi: 10.7498/aps.64.137801

Gao Xiao-Qin, Zhuo Ning-Ze, Wang Hai-Bo, Cui Yi-Ping, Zhang Jia-Yu. 2015: Application of semiconductor quantum dots no white-light-emitting dio des, Acta Physica Sinica, null(13): 137801. doi: 10.7498/aps.64.137801

Citation:

Gao Xiao-Qin, Zhuo Ning-Ze, Wang Hai-Bo, Cui Yi-Ping, Zhang Jia-Yu. 2015: Application of semiconductor quantum dots no white-light-emitting dio des, Acta Physica Sinica, null(13): 137801. doi: 10.7498/aps.64.137801

半导体量子点在白光LED器件上的应用研究?

东南大学电子科学与工程学院，先进光子学中心，南京 210096
南京工业大学电光源材料研究所,南京,210015

Application of semiconductor quantum dots no white-light-emitting dio des

摘要: 以CdSe, CuInS2和CdS：Mn量子点为例,本文基于量子点白光LED器件的电光转换过程,引入量子点的“类”光谱光效率函数,给出了该器件的色坐标、光效和量子点配比等计算公式,理论计算结果和实验结果基本一致。研究结果表明量子点的荧光峰位和峰宽对白光器件的显色指数有显著影响。
- 量子点 /
- 固态照明 /
- 白光LED
Abstract: Based on the electro-optical energy transfer process, the pseudo-spectral-luminous e?ciency function (ΦQD) of quantum dots (QDs) is introduced, the equations of chromaticity coordinates, luminous e?ciency, and the QDs’ mass of the white-light-emitting devices with CdSe, CuInS2 or CdS:Mn QDs are obtained, and the calculated results are in agreement with the experimental data. For a certain luminescent peak wavelength, when the full width at half maximum of the QD’s photoluminescence becomes larger, theΦQD value becomes smaller while the chromaticity coordinates become more different from those of the corresponding monochromatic light. It is indicated that the color rendering index (CRI) of the devices is strongly dependent on the photoluminescent position and width of the QDs, and the CRI value can be increased towards 98 when a certain kind of CdS:Mn QDs is added into the traditional white-light LEDs.

计量

文章访问数: 608
HTML全文浏览数: 109
PDF下载数: 0
施引文献: 0

半导体量子点在白光LED器件上的应用研究?

东南大学电子科学与工程学院，先进光子学中心，南京 210096
南京工业大学电光源材料研究所,南京,210015

关键词:

量子点 /
固态照明 /
白光LED

摘要: 以CdSe, CuInS2和CdS：Mn量子点为例,本文基于量子点白光LED器件的电光转换过程,引入量子点的“类”光谱光效率函数,给出了该器件的色坐标、光效和量子点配比等计算公式,理论计算结果和实验结果基本一致。研究结果表明量子点的荧光峰位和峰宽对白光器件的显色指数有显著影响。

English Abstract

Application of semiconductor quantum dots no white-light-emitting dio des

东南大学电子科学与工程学院，先进光子学中心，南京 210096
南京工业大学电光源材料研究所,南京,210015

Keywords:

量子点 /
固态照明 /
白光LED

Abstract: Based on the electro-optical energy transfer process, the pseudo-spectral-luminous e?ciency function (ΦQD) of quantum dots (QDs) is introduced, the equations of chromaticity coordinates, luminous e?ciency, and the QDs’ mass of the white-light-emitting devices with CdSe, CuInS2 or CdS:Mn QDs are obtained, and the calculated results are in agreement with the experimental data. For a certain luminescent peak wavelength, when the full width at half maximum of the QD’s photoluminescence becomes larger, theΦQD value becomes smaller while the chromaticity coordinates become more different from those of the corresponding monochromatic light. It is indicated that the color rendering index (CRI) of the devices is strongly dependent on the photoluminescent position and width of the QDs, and the CRI value can be increased towards 98 when a certain kind of CdS:Mn QDs is added into the traditional white-light LEDs.

全文HTML

参考文献 (0)

/

下载: 全尺寸图片幻灯片

分享

用微信扫码二维码

分享至好友和朋友圈

返回