[1] 朱剑涛, 刘晨, 刘天雄. 卫星真空烘烤试验方案及验证[J]. 航天器环境工程,2018,35(1):6(in Chinese) doi: 10.12126/see.2018.01.014 Zhu J T, Liu C, Liu T X. The satellite vacuum bakeout test scheme with validation[J]. Spacecraft Environment Engineering,2018,35(1):6 doi: 10.12126/see.2018.01.014
[2] 孙玉玮, 王洪兴, 杜春林, 等. 航天器热真空试验过程中星内气体压力变化研究[J]. 真空科学与技术学报,2019,39(3):6(in Chinese) Sun Y W, Wang H X, Du C L, et al. Modelling and analysis of outgassing properties inside spacecraft in ground-simulation thermal test[J]. Chinese Journal of Vacuum Science and Technology,2019,39(3):6
[3] 达道安. 真空设计手册(第三版)[M]. 北京: 国防工业出版社, 2004: 1040−1083(in Chinese) DA Daoan. The design manual of vacuum thirdedition[M]. Beijing: National defence industry press, 2004: 1040−1083
[4] 袁家军. 卫星结构设计与分析[M]. 北京: 宇航出版社, 2004(in Chinese) Yuan J J. Satellite structure design and analysis[M]. Beijing: Astronautic Press, 2004
[5] 徐福祥. 卫星工程概论[M]. 北京: 宇航出版社, 2003(in Chinese) Xu F X. Introduction to Satellite Engineering[M]. Beijing: Astronautic Press, 2003
[6] 高慎斌. 卫星制造技术[M]. 北京: 宇航出版社, 1998(in Chinese) Gao S B. Satellite manufacturing technology[M]. Beijing: Astronautic Press, 1998
[7] Bernhard Schläppi, AltweggK , Balsiger H , et al. Characterization of the gaseous spacecraft environment of Rosetta by ROSINA[J]. 2011
[8] SchlppiB , Altwegg K , Balsiger H , et al. Influence of spacecraft outgassing on the exploration of tenuous atmospheres with in situ mass spectrometry[J]. Journal of Geophysical Research Space Physics, 2010, 115(A12): 1648-1660
[9] 陈涛, 李玉忠, 许忠旭, 等. 真空热试验中材料放气的放气量及其导热问题[J]. 航天器环境工程,2006,23(2):103−106(in Chinese) doi: 10.3969/j.issn.1673-1379.2006.02.010 Chen T, Li Y Z, Xu Z X, et al. Material outgassing amount and thermal conduction in vacuum thermal test[J]. Spacecraft Environment Engineering,2006,23(2):103−106 doi: 10.3969/j.issn.1673-1379.2006.02.010
[10] J. H. 德博尔. 吸附的动力学特性[M]. 北京: 科学出版社, 1964(in Chinese) J. H. Debor. The dynamic characteristics of adsorption[M]. Beijing: Science Press, 1964
[11] Ernst, Michael J. Vacuumpumpdown model for long outgassing tubes[J]. Journal of Vacuum Science & Technology A Vacuum Surfaces & Films,1998,12(2):554−563 doi: 10.1116/1.579168