[1] 谢亚红,胡纯栋,韦江龙,等. CFETR中性束注入系统负离子束源概念设计[J]. 核聚变与等离子体物理,2021,41(4):628−634 doi: 10.16568/j.0254-6086.202104008
[2] 曹占龙,刘智民,谢远来,等. 基于ANSYS的中性束注入器主真空室结构力学分析[J]. 机械设计与制造,2012(5):101−103 doi: 10.3969/j.issn.1001-3997.2012.05.037
[3] Rigato W, Bello S D, Marcuzzi D, et al. Vessel Design and Interfaces Development for the 1 MV ITER Neutral Beam Injector and Test Facility[J]. Fusion Engineering and Design, 2009, 84(7–11): 1606–1610
[4] Toigo V,Piovan R,Bello S D,et al. A Substantial Step Forward in the Realization of the ITER HNB System: The ITER NBI Test Facility[J]. Fusion Engineering and Design,2017,123:32−39 doi: 10.1016/j.fusengdes.2016.11.007
[5] Rigato W,Boldrin M,Dalbello S,et al. Design, Interface Development and Structural Analyses of SPIDER Vacuum Vessel[J]. Fusion Engineering and Design,2010,85(10-12):2305−2311 doi: 10.1016/j.fusengdes.2010.09.008
[6] Zaccaria P,Valente M,Rigato W,et al. Manufacturing, Assembly and Tests of SPIDER Vacuum Vessel to Develop and Test a Prototype of ITER Neutral Beam Ion Source[J]. Fusion Engineering and Design,2015,96-97:383−387 doi: 10.1016/j.fusengdes.2015.03.038
[7] Xu Y,Hu C,Liang L,et al. Preliminary Design of Diagnostic System for Negative Neutral Beam Injector at ASIPP.[J]. The Review of scientific instruments,2019,90(12):123512 doi: 10.1063/1.5128262
[8] 郭亮. CFETR CS模型线圈低温测试平台的真空室及传输线的结构设计与分析[D]. 合肥: 中国科学技术大学, 2017
[9] 中华人民共和国机械工业工业部. 钢制压力容器分析设计标准: JB 4732—1995[S]. 北京: 中国机械工业出版社, 1995
[10] 龚正,倪小军,韩松博,等. 中国聚变工程实验堆主机真空室结构设计与分析[J]. 压力容器,2021,38(8):34−41 doi: 10.3969/j.issn.1001-4837.2021.08.006
[11] 许爱华. CFETR CS模型线圈力学分析以及氦进出口设计与制造工艺研究[D]. 中国科学技术大学, 2018
[12] 冉红,曹曾,唐乐,等. HL-2M装置真空室设计[J]. 核聚变与等离子体物理,2021,41(S1):327−331 doi: 10.16568/j.0254-6086.2021s1008