[1] Zhao T X,Zhang M,Cui Y Y,et al. Product analysis of aluminum alloy bearing bush and its surface coating layer for automobile parts[J]. Automobile Parts,2020(1):70−76 (赵同新,张敏,崔园园,等. 汽车零部件铝合金轴瓦及其表面涂层的产品解析[J]. 汽车零部件,2020(1):70−76(in chinese) Zhao T X, Zhang M, Cui Y Y, et al. Product analysis of aluminum alloy bearing bush and its surface coating layer for automobile parts[J]. Automobile Parts, 2020(1): 70-76
[2] Xiao Q D,Lu B. New surface treatment technology for aluminum alloy wheel hub[J]. Modern Components,2011(4):80−83 (肖庆丹,陆斌. 铝合金轮毂表面处理新技术[J]. 现代零部件,2011(4):80−83(in chinese) Xiao Q D, Lu B. New surface treatment technology for aluminum alloy wheel hub[J]. Modern Components, 2011(4): 80-83
[3] Li Z Q,Lou Z Y,Chen C,et al. Research on surface protection of low pressure casting aluminum alloy wheel hub[J]. Shandong Industrial Technology,2017(24):14 (李志强,娄振洋,陈辰,等. 低压铸造铝合金车轮毂表面防护研究[J]. 山东工业技术,2017(24):14(in chinese) Li Z Q, Lou Z Y, Chen C, et al. Research on surface protection of low pressure casting aluminum alloy wheel hub[J]. Shandong Industrial Technology, 2017(24): 14
[4] Song F,Luo Z L,Wu H B. Surface treatment and corrosion resistance of Mg-5.2 Al-0.5 Mn-1.8 Ca alloy sheet for automobile hubs[J]. Heat Treatment of Metals,2019,44(12):181−185 (宋飞,罗志林,吴会波. 汽车轮毂用Mg-5.2Al-0.5Mn-1.8Ca合金板材的表面处理与耐腐蚀性能[J]. 金属热处理,2019,44(12):181−185(in chinese) Song F, Luo Z L, Wu H B. Surface treatment and corrosion resistance of Mg-5.2 Al-0.5 Mn-1.8 Ca alloy sheet for automobile hubs[J]. Heat Treatment of Metals, 2019, 44(12): 181-185
[5] Yang Z M. Surface treatment and trends of automotive aluminum wheel hubs[J]. Automobile & Parts,2015(2):65−67 (杨忠敏. 汽车铝轮毂的表面处理及趋势[J]. 汽车与配件,2015(2):65−67(in chinese) doi: 10.3969/j.issn.1006-0162.2015.02.020 Yang Z M. Surface treatment and trends of automotive aluminum wheel hubs[J]. Automobile & Parts, 2015(2): 65-67 doi: 10.3969/j.issn.1006-0162.2015.02.020
[6] Xu J L,Zhao G P,Hu Y H,et al. Application of electroplating process for aluminum[J]. Electroplating & Finishing,2009,28(1):7−9 (徐金来,赵国鹏,胡耀红,等. 汽车铝轮毂电镀工艺应用[J]. 电镀与涂饰,2009,28(1):7−9(in chinese) Xu J L, Zhao G P, Hu Y H, et al. Application of electroplating process for aluminum[J]. Electroplating & Finishing, 2009, 28(1): 7-9
[7] Pan J H,Qian M G. Application of complex coating technology in aluminum alloy hubs[J]. Shanghai Coatings,2008,46(11):18−20 (潘建华,钱苗根. 复合涂层技术在铝合金轮毂生产中的应用[J]. 上海涂料,2008,46(11):18−20(in chinese) doi: 10.3969/j.issn.1009-1696.2008.11.006 Pan J H, Qian M G. Application of complex coating technology in aluminum alloy hubs[J]. Shanghai Coatings, 2008, 46(11): 18-20 doi: 10.3969/j.issn.1009-1696.2008.11.006
[8] Cui B J. Surface treatment and trends of automotive aluminum wheel hubs[J]. Internal Combustion Engine & Parts,2019(2):17−18 (崔宝军. 汽车铝轮毂的表面处理及趋势[J]. 内燃机与配件,2019(2):17−18(in chinese) doi: 10.3969/j.issn.1674-957X.2019.02.009 Cui B J. Surface treatment and trends of automotive aluminum wheel hubs[J]. Internal Combustion Engine & Parts, 2019(2): 17-18 doi: 10.3969/j.issn.1674-957X.2019.02.009
[9] Zhu Y L. Study on electroplating technology of automobile wheel hub[J]. Electroplating & Pollution Control,2020,40(4):19−20 (朱艳丽. 汽车轮毂电镀工艺的研究[J]. 电镀与环保,2020,40(4):19−20(in chinese) doi: 10.3969/j.issn.1000-4742.2020.04.006 Zhu Y L. Study on electroplating technology of automobile wheel hub[J]. Electroplating & Pollution Control, 2020, 40(4): 19-20 doi: 10.3969/j.issn.1000-4742.2020.04.006
[10] Wu D. Application and development of physical vapor deposition technology[J]. Mechanical Engineering & Automation,2011(4):214−216 (吴笛. 物理气相沉积技术的研究进展与应用[J]. 机械工程与自动化,2011(4):214−216(in chinese) doi: 10.3969/j.issn.1672-6413.2011.04.085 Wu D. Application and development of physical vapor deposition technology[J]. Mechanical Engineering & Automation, 2011(4): 214-216 doi: 10.3969/j.issn.1672-6413.2011.04.085
[11] 安广. 铝合金轮毂表面磁控溅射镀膜工艺的研究[D]. 保定: 河北农业大学, 2013 An G. Study of the film on aluminum alloy wheel by magnetron sputtering process[D]. Baoding: Agricultural University of Hebei, 2013
[12] 吴义志. ZL101A铝合金表面磁控溅射镀TiN薄膜的研究[D]. 保定: 河北农业大学, 2011 Wu Y Z. Research about coating TiN film by magnetron sputtering on ZL101A aluminum alloy surface[D]. Baoding: Agricultural University of Hebei, 2011
[13] 靳伟. 铝合金衬底电弧离子镀氮化物膜层的研究[D]. 沈阳: 沈阳工业大学, 2007 Ji W. The nitride films on aluminum alloy substrate by arc ion plating[D]. Shenyang: Shenyang University of Technology, 2007
[14] Qin S S,Zeng G Y,Tan Y X,et al. Preparation of wear-resistant coating on aluminum alloy surface[J]. Ordnance Material Science and Engineering,2016,39(2):91−94 (覃思思,曾归余,谭彦显,等. 铝合金表面耐磨涂层的制备研究[J]. 兵器材料科学与工程,2016,39(2):91−94(in chinese) Qin S S, Zeng G Y, Tan Y X, et al. Preparation of wear⁃resistant coating on aluminum alloy surface[J]. Ordnance Material Science and Engineering, 2016, 39(2): 91-94
[15] Zhang G H,Huang G Q,Xu P,et al. Research progress in surface treatment of aluminum alloys[J]. Journal of China University of Metrology,2010,21(2):174−175 (张高会,黄国青,徐鹏,等. 铝及铝合金表面处理研究进展[J]. 中国计量学院学报,2010,21(2):174−175(in chinese) Zhang G H, Huang G Q, Xu P, et al. Research progress in surface treatment of aluminum alloys[J]. Journal of China University of Metrology, 2010, 21(2): 174-175
[16] Geng D S,Zeng K,Huang J,et al. Microstructures and tribological behavior of arc ion plated AlCrN coatings[J]. Chinese Journal of Vacuum Science and Technology,2016,36(12):1387−1393 (耿东森,曾琨,黄健,等. 电弧离子镀AlCrN涂层结构和摩擦性能的研究[J]. 真空科学与技术学报,2016,36(12):1387−1393(in chinese) doi: 10.13922/j.cnki.cjovst.2016.12.08 Geng D S, Zeng K, Huang J, et al. Microstructures and tribological behavior of arc ion plated AlCrN coatings[J]. Chinese Journal of Vacuum Science and Technology, 2016, 36(12) : 1387-1393 doi: 10.13922/j.cnki.cjovst.2016.12.08
[17] Fei J X,Zhao S S,Wu Z T,et al. Surface modification of cemented carbide substrates with AlTiXN/AlTiN ( X = Cr, Si) multilayered coatings[J]. Chinese Journal of Vacuum Science and Technology,2018,38(3):199−207 (费加喜,赵升升,吴正涛,等. AlTiXN/AlTiN (X = Cr, Si)纳米多层涂层的制备及铣削性能研究[J]. 真空科学与技术学报,2018,38(3):199−207(in chinese) Fei J X, Zhao S S, Wu Z T, et al. Surface modification of cemented carbide substrates with AlTiXN/AlTiN ( X = Cr, Si) multilayered coatings[J]. Chinese Journal of Vacuum Science and Technology, 2018, 38(3): 199-207
[18] Gerth J,Wiklund U. The influence of metallic interlayers on the adhesion of PVD TiN coatings on high-speed steel[J]. Wear,2008,264:885−892 doi: 10.1016/j.wear.2006.11.053
[19] Cunshang LY,Yusheng BZ,Liu H,et al. Ultra fine diamond film coated cutting tools and their application in aluminum alloy machining[J]. Tool Technology,2001,35(11):39−41 (村上良彦,羽生博之,刘浩,等. 超微细金刚石薄膜涂层刀具及其在铝合金加工中的应用[J]. 工具技术,2001,35(11):39−41(in chinese) doi: 10.3969/j.issn.1000-7008.2001.11.014 Cunshang LY, Yusheng BZ, Liu H, et al. Ultra fine diamond film coated cutting tools and their application in aluminum alloy machining[J]. Tool Technology, 2001, 35(11): 39-41 doi: 10.3969/j.issn.1000-7008.2001.11.014
[20] Qu S G,Sun F J,Zhang L,et al. Effects of cutting parameters on dry cutting of aluminum bronze alloy[J]. The International Journal of Advanced Manufacturing Technology,2014,70(1):669−698