[1] Taner E. Design and production of high temperature heat pipe heat recovery units[J]. Journal of Molecular Structure,2020,1212:127927 doi: 10.1016/j.molstruc.2020.127927
[2] Zhang W,Zhang D,Liu X,et al. Thermal-hydraulic analysis of the thermoelectric space reactor power system with a potassium heat pipe radiator[J]. Annals of nuclear energy,2020,136(Feb.):107018
[3] Qu Wei,Wang Huanguang,Duan Yanjun. Startup characteristics and heat transfer limits of high and super high temperature heat pipes[J]. Journal of Engineering Thermophysics,2011,32(8):1345−1348 (曲伟,王焕光,段彦军. 高温及超高温热管的启动特性和传热极限[J]. 工程热物理学报,2011,32(8):1345−1348(in chinese) QU Wei, WANG Huanguang, DUAN Yanjun. Startup characteristics and heat transfer limits of high and super high temperature heat pipes[J]. Journal of Engineering Thermophysics, 2011, 32(8): 1345-1348 (in chinese)
[4] Zhao Weilin,Zhuang Jun,Zhang Hong. Influences of the evaporator length and liquid-filled content on the startup operation of the high temperature sodium heat pipes[J]. Chemical Engineering & Machinery,2003,30(5):259−262 (赵蔚琳,庄骏,张红. 蒸发段长度与充液量对高温钠热管启动过程的影响[J]. 化工机械,2003,30(5):259−262(in chinese) doi: 10.3969/j.issn.0254-6094.2003.05.002 ZHAO Weilin, ZHUANG Jun, ZHANG Hong. Influences of the evaporator length and liquid-filled content on the startup operation of the high temperature sodium heat pipes[J]. Chemical Engineering & Machinery, 2003, 30(5): 259-262 (in chinese) doi: 10.3969/j.issn.0254-6094.2003.05.002
[5] Jia Xianjian,Guo Hang,Guo Qing,et al. Effect of heating temperature on start-up and heat transfer performance of na-k alloy heat pipe[J]. Acta Energiae Solaris Sinica,2019,40(1):17−23 (贾先剑,郭航,郭青,等. 加热温度对钠钾合金热管启动和传热性能影响[J]. 太阳能学报,2019,40(1):17−23(in chinese) JIA Xianjian, GUO Hang, GUO Qing, et al. Effect of heating temperature on start-up and heat transfer performance of na-k alloy heat pipe[J]. Acta Energiae Solaris Sinica, 2019, 40(1): 17-23 (in chinese)
[6] Han Ye,Chai Baohua,Wei Guangren,et al. Test study for starting performance of high-temperature gravity potassium heat pipes with and without wick[J]. Atomic Energy Science and Technology,2019,53(1):38−44 (韩冶,柴宝华,卫光仁,等. 有芯和无芯高温重力钾热管启动性能试验研究[J]. 原子能科学技术,2019,53(1):38−44(in chinese) HAN Ye, CHAI Baohua, WEI Guangren, et al. Test study for starting performance of high-temperature gravity potassium heat pipes with and without wick[J]. Atomic Energy Science and Technology, 2019, 53(1): 38-44 (in chinese)
[7] Ma Yugao,Zhang Yingnan,Yu Hongxing,et al. Evaporation and capillary characteristics of thin film on screen wick[J]. Atomic Energy Science and Technology,2022,56(6):1154−1162 (马誉高,张英楠,余红星,等. 丝网芯内钠薄液膜蒸发与毛细特性研究[J]. 原子能科学技术,2022,56(6):1154−1162(in chinese) doi: 10.7538/yzk.2021.youxian.0914 MA Yugao, ZHANG Yingnan, YU Hongxing, et al. Evaporation and capillary characteristics of thin film on screen wick[J]. Atomic Energy Science and Technology, 2022, 56(6): 1154-1162 (in chinese) doi: 10.7538/yzk.2021.youxian.0914
[8] Chen Yangyang,Pei Shengwang,Chen Xiaoguang,et al. Experimental investigation on heat transfer performance of pulsating heat pipeswith rectangular and circular channels[J]. Energy Conservation Technology,2019,37(4):291−295 (陈阳阳,裴圣旺,陈晓光,等. 矩形和圆形槽道脉动热管传热性能的实验研究[J]. 节能技术,2019,37(4):291−295(in chinese) doi: 10.3969/j.issn.1002-6339.2019.04.002 CHEN Yangyang, PEI Shengwang, CHEN Xiaoguang, et al. Experimental investigation on heat transfer performance of pulsating heat pipeswith rectangular and circular channels[J]. Energy Conservation Technology, 2019, 37(4): 291-295 (in chinese) doi: 10.3969/j.issn.1002-6339.2019.04.002
[9] Hoan T M, Toan N V, Hung N P, et al, Dependence of particle size and geometry of copper powder on the porosity and capillary performance of sintered porous copper wicks for heat pipes [J]. Metals, 2022, 12 (10): 1716
[10] Zhou J,Liu L,Yang X,et al. Visualization research on influencing factors of flat heat pipes[J]. Applied Thermal Engineering,2022,207:118193 doi: 10.1016/j.applthermaleng.2022.118193
[11] Ma Tingting,Zeng Jinling,Wang Xiaoyuan,et al. Experimental study on start-up characteristics of a high temperature special-shaped heat pipe[J]. Journal of Nanjing University of Technology,2017,39(3):6−10 (马婷婷,曾金令,王啸远,等. 高温异型热管启动性能实验研究[J]. 南京工业大学学报,2017,39(3):6−10(in chinese) MA Tingting, ZENG Jinling, WANG Xiaoyuan, et al. Experimental study on start-up characteristics of a high temperature special-shaped heat pipe[J]. Journal of Nanjing University of Technology, 2017, 39(3): 6-10 (in chinese)
[12] Ding Li,Zhang Hong,Xu Hui,et al. Startup characteristics of high temperature heat pipe in solar power receiver[J]. Journal of Nanjing University of Technology,2009,31(5):79−85 (丁莉,张红,许辉,等. 太阳能接收器中高温热管启动性能[J]. 南京工业大学学报,2009,31(5):79−85(in chinese) DING Li, ZHANG Hong, XU Hui, et al. Startup characteristics of high temperature heat pipe in solar power receiver[J]. Journal of Nanjing University of Technology, 2009, 31(5): 79-85 (in chinese)
[13] Wanison R,Kimura N,Murakami M,et al. Thermal performance of a cryogenic parallel heat pipe system[J]. Cryogenics,2022,128:103589 doi: 10.1016/j.cryogenics.2022.103589
[14] Bai Tong,Zhang Hong,Xu Hui,et al. Experimental study on heat transfer performance of a new type high temperature heat pipe with combined wick[J]. Thermal Power Generation,2013,42(5):59−63 (白穜,张红,许辉,等. 新型组合式吸液芯高温热管传热性能试验研究[J]. 热力发电,2013,42(5):59−63(in chinese) doi: 10.3969/j.issn.1002-3364.2013.05.059 BAI Tong, ZHANG Hong XU Hui, et al. Experimental study on heat transfer performance of a new type high temperature heat pipe with combined wick[J]. Thermal Power Generation, 2013, 42(5): 59-63 (in chinese) doi: 10.3969/j.issn.1002-3364.2013.05.059
[15] Xu Jiyuan,Zou Yong,Cheng Lin. Pore structure optimization and properties of composite wicks for loop heat pipes[J]. Proceedings of the CSEE,2012,32(23):70−74 (徐计元,邹勇,程林. 环路热管复合毛细芯的孔结构优化与性能研究[J]. 中国电机工程学报,2012,32(23):70−74(in chinese) doi: 10.13334/j.0258-8013.pcsee.2012.23.002 XU Jiyuan, ZOU Yong, CHENG Lin. Pore structure optimization and properties of composite wicks for loop heat pipes[J]. Proceedings of the CSEE, 2012, 32(23): 70-74 (in chinese) doi: 10.13334/j.0258-8013.pcsee.2012.23.002
[16] Zhang Shiwei. Foam metal research and application progress[J]. Powder Metallurgy Technology,2016,34(3):222−227 (张士卫. 泡沫金属的研究与应用进展[J]. 粉末冶金技术,2016,34(3):222−227(in chinese) doi: 10.3969/j.issn.1001-3784.2016.03.013 ZHANG Shiwei. Foam metal research and application progress[J]. Powder Metallurgy Technology, 2016, 34(3): 222-227 (in chinese) doi: 10.3969/j.issn.1001-3784.2016.03.013
[17] Fu Quanrong,Zhang Yifen,Duan Zihua,et al. Applications of porous foam metals in chemical equipment[J]. Chemical Engineering & Machinery,2010,37(6):805−810 (付全荣,张铱鈖,段滋华,等. 多孔泡沫金属及其在化工设备中的应用[J]. 化工机械,2010,37(6):805−810(in chinese) doi: 10.3969/j.issn.0254-6094.2010.06.037 FU Quanrong, ZHANG Yifen, DUAN Zihua, et al. Applications of porous foam metals in chemical equipment[J]. Chemical Engineering & Machinery, 2010, 37(6): 805-810 (in chinese) doi: 10.3969/j.issn.0254-6094.2010.06.037
[18] 施娟. 泡沫金属强化沸腾传热过程的研究[D]. 东南大学, 2015 SHI Juan. Study on boiling heat transfer enhancement with metal foams[D]. Southeast University, 2015
[19] Arik M,Bar-Cohen A,You S M. Enhancement of pool boiling critical heat flux in dielectric liquids by microporous coatings[J]. International Journal of Heat and Mass Transfer,2007,50(5):997−1009
[20] Jian Q A,Qin S B,Hai W A,et al. Performance characteristics of flat-plate oscillating heat pipe with porous metal-foam wicks[J]. International Journal of Heat and Mass Transfer,2019,137:20−30 doi: 10.1016/j.ijheatmasstransfer.2019.03.107
[21] Zheng Li,Li Juxiang,Zhu Min. Heat transfer of porous metal foam wick heat pipe[J]. CIESC Journal,2012,63(12):3861−3866 (郑丽,李菊香,朱珉. 泡沫金属吸液芯热管的传热性能[J]. 化工学报,2012,63(12):3861−3866(in chinese) doi: 10.3969/j.issn.0438-1157.2012.12.018 ZHENG Li, LI Juxiang, ZHU Min. Heat transfer of porous metal foam wick heat pipe[J]. CIESC Journal, 2012, 63(12): 3861-3866 (in chinese) doi: 10.3969/j.issn.0438-1157.2012.12.018
[22] Yao Shouguang,Cheng Qingfang,Wang Gongli,et al. Experimental investigation on heat transfer performance of foam metal wick heat pipe[J]. Journal of Jiangsu University of Science and Technology,2013,27(6):556−560 (姚寿广,程清芳,王公利,等. 以泡沫金属为吸液芯的纳米流体热管传热性能试验研究[J]. 江苏科技大学学报,2013,27(6):556−560(in chinese) YAO Shouguang, CHENG Qingfang, WANG Gongli, et al. Experimental investigation on heat transfer performance of foam metal wick heat pipe[J]. Journal of Jiangsu University of Science and Technology, 2013, 27(6): 556-560 (in chinese)
[23] Zhao Weilin,Zhuang Jun,Zhang Hong. An analysis of vapor flow from the free molecular to continuum flow in the high temperature heat pipe[J]. Journal of University of Jinan,2004,18(2):176−178 (赵蔚琳,庄骏,张红. 高温热管内蒸汽从分子流动到连续流动过程分析[J]. 济南大学学报,2004,18(2):176−178(in chinese) ZHAO Weilin, ZHUANG Jun, ZHANG Hong. An analysis of vapor flow from the free molecular to continuum flow in the high temperature heat pipe[J]. Journal of University of Jinan, 2004, 18(2): 176-178 (in chinese)
[24] Yu Ping,Zhang Hong,Xu Hui,et al. Startup performance of high-temperature sodium heat pipe with triangular groove wick[J]. Journal of Nanjing University of Technology,2015,37(1):99−103 (于萍,张红,许辉,等. 三角沟槽高温钠热管的启动性能[J]. 南京工业大学学报,2015,37(1):99−103(in chinese) YU Ping, ZHANG Hong, XU Hui, et al. Startup performance of high-temperature sodium heat pipe with triangular groove wick[J]. Journal of Nanjing University of Technology, 2015, 37(1): 99-103 (in chinese)
[25] Chen Caifu,Qian Yihao,Luo Ying,et al. Experimental research on effect of inclination angle on carrying limit of gravity heat pipe[J]. Nuclear Power Engineering,2020,41(S2):21−26 (陈富财,钱益昊,罗英,等. 倾角对重力热管携带极限影响的实验研究[J]. 核动力工程,2020,41(S2):21−26(in chinese) doi: 10.13832/j.jnpe.2020.S2.0021 CHEN Caifu, QIAN Yihao, LUO Ying, et al. Experimental research on effect of inclination angle on carrying limit of gravity heat pipe[J]. Nuclear Power Engineering, 2020, 41(S2): 21-26 (in chinese) doi: 10.13832/j.jnpe.2020.S2.0021