[1] 杨天恩, 邓成军, 石先刻, 等. 表层脱立方相梯度硬质合金及其切削应用研究进展[J]. 稀有金属与硬质合金,2023,50(6):90−98(in chinese) Yang Tianen, Den Chengjun, Shi Xianke, et al. Research progress on the gradient cemented carbides with cubic-phase free surface layer and their cutting application[J]. Rare Metals and Cemented Carbides,2023,50(6):90−98
[2] 顾金宝, 高建, 时凯华, 等. 矿用WC-Co梯度硬质合金的制备及应用研究现状[J]. 稀有金属与硬质合金,2019,47(4):83−88(in chinese) Gu Jinbao, Gao Jian, Shi Kaihua, et al. Research status on preparation and application of WC-Co Gradient cemented carbides for mining[J]. Rare Metals and Cemented Carbides,2019,47(4):83−88
[3] 徐海阳. 高压气淬热处理对高压辊磨机用硬质合金柱钉的性能影响[J]. 稀有金属与硬质合金,2023,51(4):88−91(in chinese) Xu Haiyang. Effect of high pressure gas quenching heat treatment on properties of cemented carbide studs for high pressure roller mill[J]. Rare Metals and Cemented Carbides,2023,51(4):88−91
[4] Ren X, Zou H, Diao Q, et al. Surface modification technologies for enhancing the tribological properties of cemented carbides: A review[J]. Tribology International,2023,180:108257 doi: 10.1016/j.triboint.2023.108257
[5] X = Cr, Si) multilayered coatings[J]. Chinese Journal of Vacuum Science and Technology, 2018, 38(3): 199-207 (费加喜, 赵升升, 吴正涛, 等. AlTiXN/AlTiN ( X = Cr, Si)纳米多层涂层的制备及铣削性能研究[J]. 真空科学与技术学报, 2018, 38(3): 199-207(in chinese) Fei Jiaxi, Zhao Shengsheng, Wu Zhengtao, et al. Surface modification of cemented carbide substrates with AlTiXN/AlTiN
[6] 孙紫薇, 敬正彪, 冉龙姣. 铝合金表面真空电弧离子镀AlTiCrN涂层的耐磨性研究[J]. 真空科学与技术学报,2023,43(7):640−646(in chinese) Sun Ziwei, Jing Zhengbiao, Ran Longjiao. The wear resistance of AlTiCrN coating on aluminum alloy by vacuum arc ion plating[J]. Chinese Journal of Vacuum Science and Technology,2023,43(7):640−646
[7] 葛英尚, 朱康逸, 宋国豪, 等. 涂层硬质合金刀具车削50钢的切削力与刀具磨损机理研究[J]. 工具技术,2022,56(10):17−22(in chinese) Ge Yingshang, Zhu Kangyi, Song Guohao, et al. Study on cutting force and tool wear mechanism of coated carbide tools turning 50 steel[J]. Tool Engineering,2022,56(10):17−22
[8] 田伟华, 张松锋. N2流量对刀具硬质合金表面磁控溅射TiAlSiN涂层组织和摩擦性的影响[J]. 真空科学与技术学报,2020,40(5):427−431(in chinese) Tian Weihua, Zhang Songfeng. Effect of N2 flow rate on growth and tribological property of TiAlSiN coatings on carbide substrate[J]. Chinese Journal of Vacuum Science and Technology,2020,40(5):427−431
[9] Xian G, Zhao H B, Fan H Y, et al. The structure and properties of ZrAl(Y)N coatings deposited at various N2/Ar flow ratios[J]. International Journal of Refractory Metals and Hard Materials,2014,44:60−67 doi: 10.1016/j.ijrmhm.2014.01.014
[10] 陈崇亮, 刘利国, 安孝玲. 硬质合金刀具Al2O3涂层摩擦磨损性能研究[J]. 润滑与密封,2010(9):72−75(in chinese) Chen Chongliang, Liu Liguo, An Xiaoling. Research on friction wear behavior of Al2O3 coated carbide tool[J]. Lubrication Engineering,2010(9):72−75
[11] 刘杰, 朱水生, 邓欣, 等. TiB2涂层刀具制备及干铣削Ti-6Al-4V磨损行为研究[J]. 中国陶瓷,2020,56(1):47−55(in chinese) Liu Jie, Zhu S S, Deng X, et al. Preparation of TiB2 coated tool and wear behavior of dry milling Ti-6Al-4V[J]. China Ceramics,2020,56(1):47−55
[12] 陆峰, 查丽琼, 刘鲁生, 等. 基于硬脆材料加工的金刚石涂层硬质合金刀具制备及切削性能研究[J]. 稀有金属与硬质合金,2018,46(4):78−86(in chinese) Lu Feng, Zha Liqiong, Liu Lusheng, et al. Research on preparation and cutting performance of diamond-coated cemented carbide tools used in hard brittle material machining[J]. Rare Metals and Cemented Carbides,2018,46(4):78−86
[13] Xian L J, Zhao H B, Xian G, et al. Effect of TiC addition and Co binder content in cemented carbide substrates on the microstructure and mechanical properties of the TiAlN-based composite films[J]. Vacuum,2020,182:109787 doi: 10.1016/j.vacuum.2020.109787
[14] Huang R X, Qi Z B, Sun P, et al. Influence of substrate roughness on structure and mechanical property of TiAlN coating fabricated by cathodic arc evaporation[J]. Physics Procedia,2011,18:160−167 doi: 10.1016/j.phpro.2011.06.075
[15] Tillmann W, Grisales D, Stangier D. Effects of AISI H11 surface integrity on the residual stresses and adhesion of TiAlN/substrate compounds[J]. Surface & Coating Technology,2019,357:466−472
[16] Shum P W, Zhou Z F, Li K Y. Friction and wear reduction of hard TiAlSiN coatings by an integrated approach of laser surface texturing and high-energy ion implantation[J]. Surface & Coating Technology,2014,259:136−140
[17] Xian G, Xiong J, Fan H Y, et al. Mechanical and wear properties of TiN films on differently pretreated TiCN-based cermets[J]. Applied Surface Science,2021,570:151180 doi: 10.1016/j.apsusc.2021.151180
[18] Kaya E E, Gurmena S. A straightforward approach for the synthesis of nanostructured Y2O3 particles: Synthesis, morphology, microstructure and crystal imperfection[J]. Physica E:Low-dimensional Systems and Nanostructures,2020,115:113668 doi: 10.1016/j.physe.2019.113668
[19] Zhong Z Q, Zhang L, Chen Y, et al. Strategy for achieving high-performance PVD nano-multilayered AlTiN/TiN coated milling tool: Fine platelet-grained WC-Co substrate and interface regulation[J]. Surface & Coatings Technology,2022(435):108257
[20] Gerth J, Wiklund U. The influence of metallic interlayers on the adhesion of PVD TiN coatings on high-speed steel[J]. Wear,2008,264(9−10):885−892 doi: 10.1016/j.wear.2006.11.053