[1] 孙琬婷, 李民. 射流泵喉管结构优化及模型放缩机理研究[J]. 流体机械,2023,51(11):63−70 (in Chinese) doi: 10.3969/j.issn.1005-0329.2023.11.010 Sun W T, Li M. Numerical simulation of throat structure optimization of jet pump and exploration of model contraction mechanism[J]. Fluid Machinery,2023,51(11):63−70 doi: 10.3969/j.issn.1005-0329.2023.11.010
[2] 王志艳, 胡林静, 席东民, 等. 混合室结构对蒸汽喷射器性能的影响[J]. 真空科学与技术学报,2020,40(2):180−186 (in Chinese) Wang Z Y, Hu L J, Xi D M, et al. Influence of mixing chamber structre on entrainment ratio of steam ejector: a simulation study[J]. Chinese journal of vacuum science and technology,2020,40(2):180−186
[3] 李同卓, 杨志朋, 温小萍. 射流泵内置翼片不同倾角流体混合效果及流场数值模拟[J]. 河南理工大学学报(自然科学版),2022,41(6):123−129 (in Chinese) doi: 10.3969/j.issn.1673-9787.2022.6.jzgxyxb202206014 Li T Z, Yang Z P, Wen X P. Numerical simulation of mixing effect and flow field of internal vane of jet pump with different inclination angles[J]. Journal of Henan Polytechnic University(Natural Science),2022,41(6):123−129 doi: 10.3969/j.issn.1673-9787.2022.6.jzgxyxb202206014
[4] 张国玉, 王晓冬, 刘静雯. 喷嘴出口状态对水蒸汽喷射器流动行为及其性能的影响[J]. 真空科学与技术学报,2023,43(9):762−770 (in Chinese) Zhang G Y, Wang X D, Liu J W. Numerical investigation of the nozzle exit state and its effect on the performance of the steam ejector[J]. Chinese journal of vacuum science and technology,2023,43(9):762−770
[5] 许志敏, 林丽生. 蒸汽喷射泵部分结构参数对其性能影响的研究[J]. 机械研究与应用,2017,30(3):67−70 (in Chinese) Xu Z M, Lin L S. Study on effects of structural parameters of steam jet pump on its performance[J]. Mechanical Research & Application,2017,30(3):67−70
[6] Yuan Y, Tan L, Xu Y, et al. Three-dimensional CFD modeling and simulation on the performance of steam ejector heat pump for dryer section of the paper machine[J]. Vacuum,2015,122:168−178 doi: 10.1016/j.vacuum.2015.09.016
[7] Banasiak K, Hafner A, Andresen T. Experimental and numerical investigation of the influence of the two-phase ejector geometry on the performance of the R744 heat pump[J]. International Journal of Refrigeration,2012,35(6):1617−1625 doi: 10.1016/j.ijrefrig.2012.04.012
[8] Shah A, Chughtai I R, Inayat M H. Experimental and numerical investigation of the effect of mixing section length on direct-contact condensation in steam jet pump[J]. International Journal of Heat and Mass Transfer,2014,72:430−439 doi: 10.1016/j.ijheatmasstransfer.2014.01.032
[9] Zhang Q, Huo J, Liu R, et al. Numerical simulation and performance study of steam ejector using CFD[J]. Advanced Science Letters,2011,562-564(6-7):1150−1154
[10] 许鹏宇, 王凯, 崔峰源, 等. 不同几何尺寸蒸汽喷射器的三维模拟研究[J]. 山东化工,2021,50(13):173−175 (in Chinese) Xu P X, Wang K, Cui F Y, et al. Three-dimensional simulation study of steam ejectors with different geometric dimensions[J]. Shandong chemical industry,2021,50(13):173−175
[11] 胡词, 张庆, 宁野, 等. 喷射泵性能优化设计及其力学性能研究进展[J]. 山东化工,2021,50(19):68−70 (in Chinese) doi: 10.3969/j.issn.1008-021X.2021.19.025 Hu C, Zhang Q, Ning Y, et al. Research progress on optimal design and mechanical proper tiesof pump[J]. Shandong chemical industry,2021,50(19):68−70 doi: 10.3969/j.issn.1008-021X.2021.19.025
[12] 赵丽娟. 液固射流混合过程的模拟与实验研究[D]. 沈阳: 东北大学, 2020 (in Chinese) Zhao L J. Simulation and experimental study on mixing process of liquid-solid Jet[D]. Shenyang: Northeastern University, 2020