[1] Wang H, Ma Y, Zheng Q, et al. Review of recent development of MEMS speakers[J]. Micromachines,2021,12(10):1257 doi: 10.3390/mi12101257
[2] Zawawi S A, Hamzah A A, Majlis B Y, et al. A review of MEMS capacitive microphones[J]. Micromachines,2020,11(5):484 doi: 10.3390/mi11050484
[3] Gemelli A, Tambussi M, Fusetto S, et al. Recent trends in structures and interfaces of MEMS transducers for audio applications: A review[J]. Micromachines,2023,14(4):847 doi: 10.3390/mi14040847
[4] Hall N A, Okandan M, Littrell R, et al. Simulation of thin-film damping and thermal mechanical noise spectra for advanced micromachined microphone structures[J]. Journal of microelectronmechanical systems,2008,17(3):688−697 doi: 10.1109/JMEMS.2008.918384
[5] 高铁成, 远桂民, 王昊. 电容式微机械超声换能器的设计与仿真[J]. 天津工业大学学报,2021(4):84−88 (in Chinese) Gao T C, Yuan G M, Wang H. Design and simulation of air-coupled CMUT[J]. Journal of Tiangong University,2021(4):84−88
[6] 程先哲, 杨鹏, 张勇等. 基于石墨烯薄膜的静电扬声器理论建模与仿真分析[J]. 电子测量与仪器学报,2017,31(12):1896−1901 (in Chinese) Cheng X A, Yang P, Zhang Y, et al. Theoretical modeling and simulation analysis of electrostatic loudspeaker based on graphene membrane[J]. Journal of Electronic Measurement and Instrumentation,2017,31(12):1896−1901
[7] Arevalo A, Castro D, Conchouso D, et al. Digital electrostatic acoustic transducer array[C]. In2016 IEEE 11th Annual International Conference on Nano/Micro Engineered and Molecular Systems (NEMS) 2016 Apr 17: 225−228
[8] Arevalo A, Byas E, Conchouso D, et al. A versatile multi-user polyimide surface micromachinning process for MEMS applications[C]. In10th IEEE International Conference on Nano/Micro Engineered and Molecular Systems 2015 Apr 7: 561−565
[9] Zheng Z, Yao Y, Liu J A, et al. Highly sensitive CMUT-based humidity sensors built with nitride-to-oxide wafer bonding technology[J]. Sensors and Actuators B: Chemical,2019,294:123−131 doi: 10.1016/j.snb.2019.05.003
[10] Garud M V, Pratap R. A novel MEMS speaker with peripheral electrostatic actuation[J]. Journal of Microelectromechanical Systems,2020,29(4):592−599 doi: 10.1109/JMEMS.2020.3003463
[11] 丁琦. 基于电容式微机械超声换能器的微压传感器研究[D]. 中北大学, 2022 (in Chinese) Ding Q. Research of micro pressure sensor based on capacitive micromachined ultrasonic transducer[D]. 2022, North University of China
[12] Verreault A, Cicek P V, Robichaud A. A surface-micromachined levitating MEMS speaker[C]. In2022 20th IEEE Interregional NEWCAS Conference (NEWCAS), 2022, 134−138
[13] Anzinger S, Bretthauer C, Wasisto H S, et al. Dual-backplate CMUTs with wide bandwidth and low driving voltage for airborne applic-ations[J]. IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control,2023,70(10):1286−1294 doi: 10.1109/TUFFC.2023.3309997
[14] Diamond B M, Neumann J J, Gabriel K J. Digital sound reconstruction using arrays of CMOS-MEMS microspeakers[C]. InTRANSDUCE-RS'03. 12th International Conference on Solid-State Sensors, Actuators and Microsystems. Digest of Technical Papers (Cat. No. 03TH8664), 2003, 238−241
[15] Busbridge S C, Fryer P A, Huang Y. Digital loudspeaker technology: current state and future developments[C]. InAudio Engineering Society Convention 112 2002 Apr 1, 2002, 205−209
[16] Tumpold D. Modeling and optimization methods of an electrostatically driven MEMS speaker[D]. Shaker, 2014
[17] 马登永, 蔡野锋, 沐永生, 等. 全数字式扬声器阵列系统的设计与实现[J]. 电声技术,2011,35(011):25−29 (in Chinese) Ma D Y, Cai Y F, Mu Y S, et al. Design and implementation of all-digital loudspeaker array system[J]. Loudspeaker and Microphone,2011,35(011):25−29
[18] 徐宁. 微型声频定向扬声器相控阵聚焦研究[D]. 杭州: 电子科技大学, 2013 (in Chinese) Xu N. Micro audio directional system phase array research[D]. Hangzhou: University of Electronic Science and Technology of China, 2013
[19] 金瑞. 基于SDM和平板换能器技术的数字直驱扬声器创新设计[J]. 昆明冶金高等专科学校学报,2018,34(1):28−35 (in Chinese) Jin R. Innovative design of digital direct-drive loudspeaker based on SDM and plate transducer technology[J]. Journal of Kunming Metallurgy College,2018,34(1):28−35
[20] Kontomichos F, Mourjopoulos J, Tatlas N A. Alternative encoding techniques for digital loudspeaker arrays[C]. InAudio Engineering Society Convention 122, 2007, 2 , 881−889