| [1] | 王志刚, 张伟儒, 李伶, 等. 氮化硅薄膜制备方法现状综述[J]. 现代技术陶瓷, 2007, 28(2): 12−18 (in Chinese) doi: 10.3969/j.issn.1005-1198.2007.02.004 Wang Z G, Zhang W R, Li L, et al. A review of current preparation methods of silicon nitride films[J]. Advanced ceramics, 2007, 28(2): 12−18 doi: 10.3969/j.issn.1005-1198.2007.02.004 |
| [2] | 黄广龙. 半导体制造技术综述[J]. 山东工业技术, 2016(11): 41−44 (in Chinese) Huang G L. Semiconductor manufacturing technology review[J]. Shandong Industrial Technology, 2016(11): 41−44 |
| [3] | 刘汉法, 张化福, 郭美霞, 等. 衬底温度对直流磁控溅射法沉积ZnO: Ti薄膜性能的影响[J]. 真空科学与技术学报, 2011, 31(1): 95−99 (in Chinese) Liu H F, Zhang H F, Guo M X, et al. Growth and characterization of Ti-Doped ZnO films by DC magnetron sputtering[J]. Chinese Journal of Vacuum Science and Technology, 2011, 31(1): 95−99 |
| [4] | Setyawan H, Shimada M, Ohtsuka K, et al. Visualization and numerical simulation of fine particle transport in a low-pressure parallel plate chemical vapor deposition reactor[J]. Chemical Engineering Science, 2002, 57(3): 497−506 doi: 10.1016/S0009-2509(01)00373-6 |
| [5] | Leroy O, Perrin J, Jolly J, et al. Thermal accommodation of a gas on a surface and heat transfer in CVD and PECVD experiments[J]. Journal of Physics D: Applied Physics, 1999, 30(4): 499−509 |
| [6] | 夏焕雄, 向东, 牟鹏, 等. PECVD腔室热流场数值仿真研究[J]. 人工晶体学报, 2012, 41(4): 1030−1036 (in Chinese) doi: 10.3969/j.issn.1000-985X.2012.04.039 Xia H X, Xiang D, Mu P, et al. Simulation of flow and thermal field in a PECVD reaction chamber[J]. Journal of Synthetic Crystals, 2012, 41(4): 1030−1036 doi: 10.3969/j.issn.1000-985X.2012.04.039 |
| [7] | 杨旺, 刘学平, 夏焕雄, 等. 工艺腔室温度场轮廓特性分析及传热结构设计[J]. 真空科学与技术学报, 2016, 36(1): 103−109 (in Chinese) Yang W, Liu X P, Xia H X, et al. Simulation of temperature profile and design of heat transfer structure for reactor of film growth on Si-Wafer[J]. Chinese Journal of Vacuum Science and Technology, 2016, 36(1): 103−109 |